Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberking 360 Feller Buncher

Timberking 360 Feller Buncher

2005 Timberking 360 Feller Buncher. This machine has 6,102 hours, runs and starts good, 24" head, straight blade, teeth are @ 50%, strong hydraulics, tight joystick controls, tight center section, tires 28Lx26 like new, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Timberking 360 2005
$67,900
Timberjack 1710B Double Bunk Forwarder

Timberjack 1710B Double Bunk Forwarder

2000 Timberjack 1710B Double Bunk Forwarder. This machine has 11,800 hours, runs and starts good, strong hydraulics and cylinders, 1,000 hours on rebuilt rear bogies, brand new display modules, tight boom and grapple, 1,000 gallon custom made water tank, 4 new bunk extenders. Tires are in good order with chains and tracks, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timberjack 1710B 2000
$99,900
CAT 501HD Processor with a Fabtek Head

CAT 501HD Processor with a Fabtek Head

2011 CAT 501HD Processor with a Fabtek Head. This machine has 8,600 hours, runs and starts good, Pro-Heat system, undercarriage was just gone through, new idlers, rollers, sprockets, and rails. Pads are decent, strong hydraulics, tight boom, head is in good working condition, computer is in good order, new Sure Grip handles, new jet fix bar tensioner. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 501HD 2011
$Call for Price
2004 Valmet 840.2 Forwarder/Skidder

2004 Valmet 840.2 Forwarder/Skidder

17,320 Hours. Sisu engine, runs great, very quiet and fuel efficient. Hydrostatic transmission. Cranab CRF-6 loader. Bunks are nice and straight. Webasto Pre-heater. 600x55x26.5 Tires all the way around. Heat, A/C, and Stereo. Maxi Display screen.

Valmet 840.2 2004
$79,500
Hydro-Ax 311C Bunching Shear ***SOLD***

Hydro-Ax 311C Bunching Shear ***SOLD***

1989 Hydro-Ax 311C Bunching Shear. This machine has a John Deere 4 cyl. engine, runs and starts good, new hydraulic pump 1,000 hours ago, strong hydrostatic transmission, tight center section, new blades on shear, shear cylinders were recently repacked, new disconnect switch, new temp gauge, 28Lx26 Firestone tires, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 311C 1989
$21,500
Morbark 1500 Tub Grinder

Morbark 1500 Tub Grinder

2003 Morbark 1500 Tub Grinder. This machine has a Cummins QST 1000 HP engine, runs and starts good, this engine has a newer turbo, 7,700 hours, strong hydraulics, good hoses and pumps. Owner said that this grinder is in good working condition, conveyor belt in is good condition, carrier has good tires and brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***REDUCED FROM $135,000.00***

Morbark 1500 2003
$105,000
TimberPro TN725 Processor with a Log Max 7000 Head

TimberPro TN725 Processor with a Log Max 7000 Head

2016 TimberPro TN725 Processor with a Log Max 7000 Head. This machine only has 1,300 hours, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had all hydraulic motors replaced and valve bank resealed, Logmate 400 computer system, fire suppression, Espar pre-heater system with timer, deluxe seat-air ride heat and lumbar, heat, A/C, and LED lighting. Warranty until March. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725 2016
$Call for Price
Timberking TK711HD Processor

Timberking TK711HD Processor

2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK711HD 2006
$94,900
John Deere 1270D Wheel Processor

John Deere 1270D Wheel Processor

John Deere 1270D Wheel Processor, 2006, 12,800 Hours, 480 Processor Head, 700 Tires @ 60%, Rotate and Level Cab. Nice Running Machine For the Hours. $69,000

John Deere 1270D 2006
$69,000
 2006 Timbco 415 EX w/Rolly Processor

2006 Timbco 415 EX w/Rolly Processor

Very clean inside and out. 14,600 hrs. Excellent undercarriage. Dasa computer with Risley joystick controls. Heat and A/C. Strong finals and pumps, ready for work! Came directly off of the job. Strong running, very durable, very efficient and dependable Sisu 6 cylinder diesel engine. These motors are very quiet as well. Original paint, nothing to hide, come and check it out and run it. Rolly II processing head with independent measuring wheel.

Timbco 415EX 2007
$139,500
Kobelco SK200 Harvester

Kobelco SK200 Harvester

1998 Kobelco SK200 with the Waratah HTH20 Harvester Head. This machine runs and starts good, tight boom, undercarriage is in good working order, hoses on the attachment and the cylinder on the attachment has a leak, but the excavator runs strong. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Kobelco SK200 1998
$34,900
CAT 525B Grapple Skidder

CAT 525B Grapple Skidder

2002 CAT 525B Grapple Skidder with Winch. This skidder runs and starts good, tight pins and bushings, strong hydraulics and cylinders, transmission is in good working order, strong winch, 2 new tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

CAT 525B 2002
$55,000