Sort By:   GridGallery
Photo Title
Make Model Year Price
Hydro-Ax 311C Bunching Shear ***SOLD***

Hydro-Ax 311C Bunching Shear ***SOLD***

1989 Hydro-Ax 311C Bunching Shear. This machine has a John Deere 4 cyl. engine, runs and starts good, new hydraulic pump 1,000 hours ago, strong hydrostatic transmission, tight center section, new blades on shear, shear cylinders were recently repacked, new disconnect switch, new temp gauge, 28Lx26 Firestone tires, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 311C 1989
$21,500
Morbark 1500 Tub Grinder

Morbark 1500 Tub Grinder

2003 Morbark 1500 Tub Grinder. This machine has a Cummins QST 1000 HP engine, runs and starts good, this engine has a newer turbo, 7,700 hours, strong hydraulics, good hoses and pumps. Owner said that this grinder is in good working condition, conveyor belt in is good condition, carrier has good tires and brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***REDUCED FROM $135,000.00***

Morbark 1500 2003
$105,000
TimberPro TN725 Processor with a Log Max 7000 Head

TimberPro TN725 Processor with a Log Max 7000 Head

2016 TimberPro TN725 Processor with a Log Max 7000 Head. This machine only has 1,300 hours, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had all hydraulic motors replaced and valve bank resealed, Logmate 400 computer system, fire suppression, Espar pre-heater system with timer, deluxe seat-air ride heat and lumbar, heat, A/C, and LED lighting. Warranty until March. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725 2016
$Call for Price
Timberking TK711HD Processor

Timberking TK711HD Processor

2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK711HD 2006
$94,900
John Deere 1270D Wheel Processor

John Deere 1270D Wheel Processor

John Deere 1270D Wheel Processor, 2006, 12,800 Hours, 480 Processor Head, 700 Tires @ 60%, Rotate and Level Cab. Nice Running Machine For the Hours. $69,000

John Deere 1270D 2006
$69,000
 2006 Timbco 415 EX w/Rolly Processor

2006 Timbco 415 EX w/Rolly Processor

Very clean inside and out. 14,600 hrs. Excellent undercarriage. Dasa computer with Risley joystick controls. Heat and A/C. Strong finals and pumps, ready for work! Came directly off of the job. Strong running, very durable, very efficient and dependable Sisu 6 cylinder diesel engine. These motors are very quiet as well. Original paint, nothing to hide, come and check it out and run it. Rolly II processing head with independent measuring wheel.

Timbco 415EX 2007
$139,500
Kobelco SK200 Harvester

Kobelco SK200 Harvester

1998 Kobelco SK200 with the Waratah HTH20 Harvester Head. This machine runs and starts good, tight boom, undercarriage is in good working order, hoses on the attachment and the cylinder on the attachment has a leak, but the excavator runs strong. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Kobelco SK200 1998
$34,900
CAT 525B Grapple Skidder

CAT 525B Grapple Skidder

2002 CAT 525B Grapple Skidder with Winch. This skidder runs and starts good, tight pins and bushings, strong hydraulics and cylinders, transmission is in good working order, strong winch, 2 new tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

CAT 525B 2002
$55,000
John Deere 540A Skidder

John Deere 540A Skidder

1974 John Deere 540A Cable Skidder. This machine runs and starts good, strong hydraulics, and cylinders, Power Shift transmission in good working order, strong winch, solid blade, front cradle has a little play not bad, tires are in good working condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 540A 1974
$14,900
John Deere 548G III Grapple Skidder

John Deere 548G III Grapple Skidder

John Deere 548G III Grapple Skidder, 2005, 5600 Hours, Esco Grapple, Winch, 28L x 26 Tires @ 90%, Cab With A/C and Heat.

John Deere 548G III 2005
$115,000
Savage 60" Slasher

Savage 60" Slasher

New 60 inch Savage Slasher, 100 inch or 16ft 6 inch with butt plate down.

Savage 60 -
$28,000
Timberjack 1270 Converted to a Chipper ***SOLD***

Timberjack 1270 Converted to a Chipper ***SOLD***

1995 Timberjack 1270 Carrier. This chipper has 12,983 hours, Remanufactured Perkins 1006T Engine 160HP 6,000 hours on reman. Chipper head is a Bandit 250XP with 2,200 hours, 12" capacity, chipper engine is a Cummins 6BT 2,200 hours 145HP. Loader is a Nokka 3966, 23' reach, 3,000 LBS. lift capacity. All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. The 1270 is a 1995. The Bandit chipper head is a 2003 and was installed new. The machine was built in 2006. Seller is open to reasonable offers. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA. ***SOLD***

Timberjack 1270 1995
$45,500