Sort By:   GridGallery
Photo Title
Make Model Year Price
Fabtek 546C Forwarder

Fabtek 546C Forwarder

2002 Fabtek 546C 6 Wheeled Double Bunk Forwarder. This forwarder has 15,000 hours, runs and operates good, strong hydraulics and cylinders, center pins and boom pins are nice and snug along with the bucket. Log bunks are in great shape not all welded. Joystick controls are on point, great response not jumpy, very fast and accurate. Tires are fair, also has a set of tire chains for the front. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek 546C 2002
$56,900
2013 CAT 501HD

2013 CAT 501HD

CAT 501HD TRACKED HARVESTER 6 CYL CAT PRO HEAT THIRD MEASURING WHEEL FOUR ROLLER HEAD

CAT 501HD 2013
$259,000
Franklin 132 Single Bunk Forwarder

Franklin 132 Single Bunk Forwarder

1985 Franklin 132 Single Bunk Forwarder. This equipment has a newer John Deere Powertech engine, runs and starts good, strong hydraulics and cylinders, tight center section and boom, SureGrip 360 grapple, new hoses, new glass, new cab heater. Tires are @ 75%. Well maintained. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 132 1985
$33,900
Peterson 4800 Flail Debarker

Peterson 4800 Flail Debarker

2000 Peterson 4800 Flail Debarker. This equipment has low hours - only 2,612, Cummins engine, starts & runs good, strong hydraulics, double flail, bottom bark discharge, wireless remote. Original paint. All in good working condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA .

Peterson Pacific 4800 2000
$59,500
Timberjack 450C Skidder ***SOLD***

Timberjack 450C Skidder ***SOLD***

1993 Timberjack 450C Dual Arch Grapple Skidder. This machine has a 5.9 Cummings, 100 hours on rebuild, new pistons and bearings, head was completely redone. 30.5x32 tires, 3 tires are at 70% and 1 is at 30%. New turbo, new engine fan, has a winch, double arch, Hydraulic pump is getting weak but still pulls wood, center pins were replaced 5 years ago, and injectors were rebuilt 100 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 450C 1993
$24,900
Hydro Ax 221 Feller Buncher ***SOLD***

Hydro Ax 221 Feller Buncher ***SOLD***

1995 Hydro Ax 221 Feller Buncher with 16" Shear Head. This equipment has a John Deere 4 cyl. engine, runs and starts good, strong hydraulics and cylinders, new hoses, drive system is in good working order, new cutting blade, tight pins and bushing on the head. Quick couplers. 28Lx26 tires @ 75%, heat, & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 221 1995
$11,500
1998 Valmet 544X Forwarder

1998 Valmet 544X Forwarder

VALMET 544X SINGLE BUNK FORWARDER 4 CYL FORD COMPLETELY REBUILT LEVER CONTROLS HEAT AND AIR NEW CENTER PINS AND BUSHINGS

Valmet 544X 1998
$49,900
Timberjack 450C Skidder ***SOLD***

Timberjack 450C Skidder ***SOLD***

1993 Timberjack 450C Dual Arch Grapple Skidder with Winch. This machine has a good running Cummins engine, strong Power shift transmission, tight center section, solid cradles and axles. Strong winch. Esco grapple. 30.5x32 tires @ 50%, like new diamond chains, dual rear rims. Heat, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberjack 450C 1993
$35,000
Lemco 15000 Self Propelled Loader  ***SOLD***

Lemco 15000 Self Propelled Loader ***SOLD***

1994 Lemco 15000 Self Propelled Loader with a Lemco Model 6000H 60" Slasher. This loader has a live heel and has been very well maintained. Continuous turn bucket. New swing motor 1,000 hours ago and pumps have been gone through. Hour meter is not working but John Deere 6059T engine is estimated to have approximately 4,500 hours on it. Recent oil and filter change. This machine is very clean for it's age and shows very few signs of wear. No major welding, cracks or leaks found. Engine is dry and does not use any oil. Slasher saw works well and has hydraulic butt plate, new teeth and negative kerf set. Self propelled carrier works well. Pins and bushings are in good shape for age, minor play in main to jib boom bushing. Swing gear is in good condition. Joystick controls, very good seat and clean cab. All functions operate as they should. Heat, no A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 15000 1994
$25,000
Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

2009 Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher. This loader has around 7,000 hours, runs and starts good, Pro heat, John Deere engine runs and starts good. Strong hydraulics and cylinders, main boom cylinder has been repacked, drive system is in good working order, pilot controls, 360 bypass grapple. 2005 Hood 60" Slasher with low hours around 200, new blade, solid frame no cracks or welds. Heavy duty tires, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hood S-182 2009
$92,500
Bell Super T Feller Buncher ***SOLD***

Bell Super T Feller Buncher ***SOLD***

1991 Bell Super T Feller Buncher with Saw Head. This buncher has a 4 cyl. Deutz engine, runs and starts good, has a few leaks, strong hydraulics, few hose leaks, boom is in decent condition, 28Lx26 tires with diamond chains, head is in good working order, 24" bar, tight controls. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Bell Super T 1991
$13,500
Timbco T415-D Feller Buncher with a Quadco 20" 360 Head

Timbco T415-D Feller Buncher with a Quadco 20" 360 Head

2002 Timbco T415-D Feller Buncher with a Quadco 20" 360 Head. This equipment has a Cummins 8.3 engine. runs and starts good, new undercarriage, 24" single grouser. Newer Espar pre-heater, strong hydraulics and cylinders, tight controls, drive motor and pumps are in good working order, solid boom. Quadco 20" 360 has a straight blade no cracks, teeth are in good condition. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD UNTIL SPRING 2020***

Timbco T415-D 2002
$95,000