Sort By:   GridGallery
Photo Title
Make Model Year Price
Rottne H14 with 561 SP Processing Head

Rottne H14 with 561 SP Processing Head

2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rottne H14 2008
$105,000
John Deere 703 JH Processor ***ON HOLD***

John Deere 703 JH Processor ***ON HOLD***

2012 John Deere 703 JH Processor with a Waratah 622B Processing Head. Well maintained machine with a 6081 Engine that starts and runs good. Has Proheat - works great. New pumps on carrier and a lot of new parts and hoses in head last spring. New saw motor, saw housing, resealed main valve in head. Alpine feed wheels. New glass. 26" double grouser pads, undercarriage is in good working condition. Stereo, Heat, & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 703JH 2012
$144,500
John Deere 643J Feller Buncher

John Deere 643J Feller Buncher

2005 John Deere 643J Feller Buncher. Hour meter reads 13,207 hours, John Deere engine, runs and starts good, strong hydraulics and drive system. Tight center section, 22" head grab arms and cylinders are in good working order, straight blade, & good teeth. Joystick controls. 28L x 26 tires @ 50%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 643J 2005
$51,500
Danzco T18 Delimber

Danzco T18 Delimber

2004 Danzco T18 Delimber. Has a Yanmar diesel engine. One owner. Approximately 500 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

Danzco P18 2004
$12,000
Prentice 384 Loader with Riley 6600 Delimber & Topping Saw

Prentice 384 Loader with Riley 6600 Delimber & Topping Saw

2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900.

Prentice 384 2006
$12,000
John Deere 437E Self Propelled Loader ***HOLD***

John Deere 437E Self Propelled Loader ***HOLD***

2018 John Deere 437E Self Propelled Loader with a 2018 Hanfab 6x6 Carrier, Rotobec 7606 360 Grapple, & Hanfab HF-72 Slasher. This equipment has a John Deere Tier IV engine, runs and starts good. Pre heat system. Hour meter reads 2,450 hours, some warranty remaining. Arctic Package, Aftermarket fuel filter heater. Strong hydraulics and cylinders, tight boom and grapple. Hanfab HF-72 Slasher, strong pump, very fast slasher. Cab has heat, A/C, LED lights, and radio. Hanfab self propelled 6x6 Carrier is in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 437E 2018
$209,500
Rottne H-14B Harvester with a SP561 LF Head

Rottne H-14B Harvester with a SP561 LF Head

2013 Rottne H-14B Harvester with a SP561 LF Head. Only 7,300 hours on this machine. John Deere 6068 engine, runs and starts good, pre-heat system, strong hydraulics and drive system. RK-140 crane, SP-561 LF head is in good working order, Dasa 5 computer, tight boom, 710 tires, Heat, A/C, LED lights, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Rottne H14B 2013
$185,000
Hydro-Ax 470 Feller Buncher with 20HC Head ***SOLD***

Hydro-Ax 470 Feller Buncher with 20HC Head ***SOLD***

2004 Hydro-Ax 470 Feller Buncher with 20HC Head. Hour meter reads 10,500 hours. New long block engine put in about 1,000 hours ago. Starts and runs good. Has 2 new tires in the rear at 95%, front tires are 80%. Tight center section, strong hydraulics. Resealed main valve bank about 500 hours ago. Enclosed cab has heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hydro-Ax 470 2004
$39,900
John Deere 648GII Skidder ***SOLD***

John Deere 648GII Skidder ***SOLD***

1999 John Deere 648GII Dual Arch Grapple Skidder. Hour meter reads 17,360 hours. This skidder has a newer 6068T John Deere that was put in at 12,500 hours, runs and starts good. PowerShift transmission was also replaced at 12,500 hours. There is receipts for both. Has new injectors. Strong hydraulics and cylinders, decent center section, arch and grapple are in good order. Axles and cradles are in good working condition. 30.5x32 tires @ 30-40% with a set of ring chains. Enclosed cab has heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 648GII 1999
$38,500
Timbco T425C Feller Buncher with a Quadco 22B ***SOLD***

Timbco T425C Feller Buncher with a Quadco 22B ***SOLD***

1999 Timbco T425C with a 2005 Quadco 22B 40° rotating head. New engine 1,000hrs ago, Quadco 22B has around 4,000 hours. New implement, charge and saw pumps with 1,000 hours, U/C 80%. New front idlers, 50 hours on bottom rollers, new sprockets, 28" double grouser pads. Solid boom. Espar heater with Arctic Fox Diesel Fired Coolant Pre-Heater. Leveling cylinders have been recently repacked. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timbco T425C 1999
$85,000
 Timberpro TL725 Feller Buncher with Quadco 22B ***SOLD***

Timberpro TL725 Feller Buncher with Quadco 22B ***SOLD***

2012 Timberpro TL725 with Quadco 22B Head. Hour meter reads 8,800 hours. 8.3L Cummins engine starts and runs good. 24" double grouser pads. This machine has a new implement pump, and has a leveling cab. Quadco 22B head is in good shape. 40° rotating. Enclosed cab has heat, A/C, and radio, good glass. Also has an Espar preheater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberpro TL725 2012
$185,000
Link Belt 3400Q Stroke Delimber

Link Belt 3400Q Stroke Delimber

1997 Link Belt 3400Q Stroke with Denis Boom Delimber. This machine has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Link Belt 3400Q 1997
$23,900