Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 1270C Processor with a 762 Head ***SOLD***

Timberjack 1270C Processor with a 762 Head ***SOLD***

2002 Timberjack 1270C Processor with a 762 Head. This machine has a Cummins engine, runs and starts good, 12,000 hours, strong hydraulics and transmission, solid boom base, squirt boom is in good working order, head has new hoses and knuckle. New pins and bearing on head. Timberjack 3000 TMC measuring system is in good working order, new wiring harness, solid bogies, 23.1 - 610 tires. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 1270C 2002
$44,900
John Deere 1010B 6 Wheel Forwarder ***SOLD***

John Deere 1010B 6 Wheel Forwarder ***SOLD***

2000-01 John Deere 1010B 6 Wheel Forwarder. This machine has newer Cummins 4BT engine less then 1,500 hours, runs and starts good, newer pump, transmission was gone through when pump was done, tight center section, bearing and bushings were done on boom, 23.1x 26 front, 610 rear tires with chains. Heat, A.C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 1010B 2000
$54,900
Parting out TimberPro 735B

Parting out TimberPro 735B

Parting out this 2010 TimberPro 735B Feller Buncher. We also have parts for the following TimberPros: 620E , 630B , 725B & 830.

Timberpro 735B 2010
$Call for Price
John Deere 648H Skidder

John Deere 648H Skidder

2008 John Deere 648H Dual Arch Grapple Skidder. This machine has about 2,500 hours on a rebuilt engine, strong hydraulics and transmission, tight center section, grapple and arch are tight, axles and cradles are all in good order, cylinders and hoses are in good working condition, 30.5 x 32 tires @ 50% with Bear claw chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2008
$51,500
Valmet 415EX Harvester ***SOLD***

Valmet 415EX Harvester ***SOLD***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet 415EX 2007
$122,500
Tree Farmer C5F Forwarder

Tree Farmer C5F Forwarder

1996 Tree Farmer C5F Single Bunk Forwarder. This machine has a newer Cummins 3.9 engine, runs and starts good, just over 7,000 hours on this machine, newer Manual transmission, tight center section, axles are in good condition, strong hydraulics and pumps, few minor leaks. Hood 418 loader, tight boom and grapple, swing gear is in good order, 23.1 x 26 tires @ 70%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tree Farmer C5F 1996
$39,900
Timberjack 460C Skidder

Timberjack 460C Skidder

2000 Timberjack 460C Skidder. This machine has approximately 500 hours on a new recon Cummins 5.9 motor, all new hoses, new center section and cradle, new hydraulic pump and a spare pump goes with machine. 35.5 x 32 rubber with chains all around, well maintained and working daily. Call Erik @ Red Pine Equipment 218-720-0933 for more info or to setup a viewing. Machine is located in Northcentral USA.

Timberjack 460C 2000
$43,900
John Deere 548D Skidder ***SOLD***

John Deere 548D Skidder ***SOLD***

1988-89 John Deere 548D Grapple Skidder with Winch. This skidder runs and starts good, PowerShift transmission, cradles have been updated, axles are in good working order, strong winch, tight center section, steer cylinders have a little play. Grapple swivel was just gone thru and resealed. New cutting edge on blade, enclosed heated cab. 28Lx26 tires @ 40-60% with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 548D 1989
$26,500
Prentice F90 Log Loader

Prentice F90 Log Loader

1997 Prentice F90 Single Pump Log Loader. This loader has a newer swing motor, tight swing bearing, joystick controls, 22' boom, Serco grapple with butt plate, has a little play in pins and bushings, will need bushings soon. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice F90 1997
$Call for Price
John Deere 648G Skidder

John Deere 648G Skidder

1998 John Deere 648G Dual Arch Grapple Skidder. Hour meter reads 18,094 hours, grapple resealed and new grapple brakes, has winch but no drive shaft, 14 bolt rims and 30.5 x 32 tires in good condition, 2 are new, & 2 are @ 60-70%, completely gone through last breakup, heat, lights, no AC. Plug in block heater. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648G 1998
$33,000
Western Star Truck with Serco 125 Loader & Sirro 60" Slasher

Western Star Truck with Serco 125 Loader & Sirro 60" Slasher

1981 Western Star Truck with a 1994 Serco 125 Loader and Sirro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 125 1994
$27,900
John Deere 753J Feller Buncher w/ a FR21B Felling Head

John Deere 753J Feller Buncher w/ a FR21B Felling Head

2013 John Deere 753J Feller Buncher with a FR21B Felling Head. Hour meter reads 8,528 hours, runs and starts good, resealed gear box, strong hydraulics and drive, new saw pump. Boom has tight pins and bushings, Bigfoot undercarriage @ 50%, 24" single grouser pads. Head has a straight disc, good teeth, grab arms are in good working order. Heat, air conditioning, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 753J 2013
$165,000