Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 425EX Feller Buncher with Quadco 22B 360° Head

Valmet 425EX Feller Buncher with Quadco 22B 360° Head

2005 Valmet 425EX Feller Buncher with Quadco 22B 360° Head. Hour meter reads ~14,800 hours. Newer Cummins QSC 8.3 engine installed in 2017 with 4,000 hours. 24" double grouser pads, undercarriage is estimated at 60% with new rails and sprockets installed in 2021. New saw pump & bearing, all new cylinders, rebuilt injector pump. Quadco 22B is a 360° head, knives & disc are good. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 425EX 2005
$75,000
Timberjack 610 Forwarder ***SOLD***

Timberjack 610 Forwarder ***SOLD***

1999 Timberjack 610 Forwarder. Hour meter reads ~11,000 hours. Newer Cummins 4BT engine 3 years ago. 28Lx26 tires are estimated at 60%. All panels are straight, good paint. Joystick controls. Serco 4000 loader is tight, newer bucket. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberjack 610 1999
$57,500
Fabtek 346B Forwarder

Fabtek 346B Forwarder

2001 Fabtek 346B 6 Wheeled Forwarder. New John Deere 4045T engine. New hydraulic pump. All cylinders have been repacked. Center has a little play, could use steering pins and shims replaced. Two of the bunks will be replaced. 23.1x26 fronts estimated at 80%. 600/55x26.5 rears estimated at 70%. New front & back glass. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Fabtek 346B 2001
$79,500
2016 803M

2016 803M

Super clean processor. Excellent interior and very straight exterior. Very well cared for. 6090T Deere engine runs like a top. We have new sprockets on order and once installed the U/C will be at 65% or so. Espar preheater. Fire protection. Heat & A/C. Timbermatic computer. Only 8,891 original hours. 6 speed hydrostatic travel works as it should. 24 inch double grouser pads. 2016 Waratah HTH622B processing head in good working condition. We do take trades depending on what you have and we can assist with trucking and financing if needed. Please feel free to call with any questions. Thanks for looking!

- - Unknown
$269,500
2013 Komatsu 840.4

2013 Komatsu 840.4

This is a very nice , well taken care of machine, It has a CRF 8.1 Crane with a newer Komatsu G36 Grapple that was put on within the last 500 hrs, with a 25 foot reach. It has a wabasto pre heater installed, has a 2 speed hydrostatic transmission,. the tires are size 600/55-26.5 on the rear, and 600/55-34 on the front and the tires are at roughly 70% We can help with financing and trucking if needed , and we also do take trades , depending on what you have to offer. Thank you for looking!

- - Unknown
$179,000
1989 Iron Mule 5310

1989 Iron Mule 5310

This Machine is in good shape for the year , It has a closed cab, but no glass, it does have a heater . It has a Ford 4 cylinder engine, non turbo, a 4 speed transmission, with High and Low range. Tire size is 23.1 x 26 We do take trades, depending on what you have to offer, and can help with financing and trucking. Give us a call to come and test this machine out!! Thank you for looking

- - Unknown
$27,500
Valmet 840 Forwarder

Valmet 840 Forwarder

2001 Valmet 840 6 Wheeled Double Bunk Forwarder. Hour meter reads 18,000 hours. Ford 4 cyl engine. Cranab 650XL loader is tight with a squirt boom. Squirt boom cylinder could be repacked. Valve bank is dry. 600 tires are estimated at 65%, one bogie tire may need to be replaced. Bunks are straight. New batteries & filters. Woods ready. Heat, A/C, & radio. A/C needs to be recharged but works. All manuals are included. Proheat preheater. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 840 2001
$39,500
2004 John Deere 748GIII Skidder

2004 John Deere 748GIII Skidder

2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE 30.5-32 RUBBER FRONT TIRE CHAINS NEW PINS AND BUSHINGS IN CENTER AND BLADE NEW BUSHINGS BOOM AND STEER CYLINDERS

John Deere 748GIII 2004
$62,900
Franklin C7F Skidder

Franklin C7F Skidder

1994 Franklin C7F Dual Arch Grapple Skidder with Winch. This skidder has a Cummins BTA 5.9 engine, runs and starts good, strong Clark Power Shift transmission, quick steer, dozer blade, tight center section and arch, strong winch, 118" grapple, 30.5 x 32 tires @ 75% with Bear claw chains. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Franklin C7F 1994
$27,900
Timberjack 230A Forwarder

Timberjack 230A Forwarder

1996 Timberjack 230A Forwarder. Hour meter reads 6,100 actual hours. Cummins 4BT engine. 28Lx26 tires are estimated at 85%. Bunks are straight and in good shape. Serco loader. 2nd owner machine. Includes a dump box that fits in between the bunks. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 230A Unknown
$79,000
Western Star Truck with Serco 125 Loader & Siiro 60" Slasher

Western Star Truck with Serco 125 Loader & Siiro 60" Slasher

1981 Western Star Truck with a 1994 Serco 125 Loader and Siiro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 125 1994
$27,900
2019 Ponsse Scorpion King

2019 Ponsse Scorpion King

This Scorpion is in excellent shape and it ready to process wood, It only has just over 4000 hours, Has a H7 Head, and a Mercedes Engine paired against a 2 speed hydrostatic transmission, It has a Webasto preheater , has a multi angle camera system, Central greasing system, and a fire suppression system. The tracks are in great shape, at about 90%. If you are looking for woods ready, here it is. We can take trades depending on what you have, and we can help with financing and trucking if needed. Thank you for looking

- - Unknown
$495,000