Sort By:   GridGallery
Photo Title
Make Model Year Price
Wagner L90 Yard Log Loader

Wagner L90 Yard Log Loader

1977 Wagner L90 Yard Log Loader. This equipment has a Cummins NTC 350 engine (350 HP) - newly installed in 2016. New hydraulic pump and steering pump, new radiator, brakes were installed in 2017. The A/C compressor was also newly installed in 2017. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Wagner L90 1977
$75,900
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2004-2005 John Deere 648GIII Single Arch Grapple Skidder with Winch. This machine is like new. everything has been gone through or replaced, brand new engine. new DD transmission, new pumps, new pins and bushings all around, new tires and paint, heat, A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648GIII 2004
$124,900
John Deere 843H Feller Buncher ***SOLD***

John Deere 843H Feller Buncher ***SOLD***

2005 John Deere 843H Feller Buncher. Hour meter reads 8,400 hours, runs and starts good, Espar Heater, hydrostatic motor was gone through, new seal on HI/LO, tight center section, strong steer and head cylinders, cylinders were rebuilt 1,000 hours ago, FD 22 head in good working order, straight blade, extra teeth, grab arm has been reinforced, 28Lx26 tires, front are @ 80%, rear tires are @ 25%, chains all around, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 843H 2005
$50,000
Timbco 415EX Processor with a Rolly II Head

Timbco 415EX Processor with a Rolly II Head

2005 Timbco 415EX Processor with a Rolly II Head. This machine runs and starts good, hour meter reads 12,000 hours, Sisu engine, strong hydraulics, drives, and cylinders, tight boom, undercarriage is in good working order, Rolly II head has good roller and grab arms, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415EX 2005
$104,900
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Dual Arch Grapple Skidder with Winch. This machine has 7,000 hours, runs and starts good, tight pins and bushings center and arch, strong hydraulics and cylinders, Torque converter machine, 30.x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2012
$121,900
John Deere 540B Cable Skidder

John Deere 540B Cable Skidder

1982 John Deere 540B Cable Skidder. This machine has new center pins less then 20 hours, strong hydraulics and cylinders, engine runs and starts good, 3 new tires 18.4x26, strong transmission, will need a new winch brake. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 540B 1982
$26,500
Hydro Ax 611EX Feller Buncher ***SOLD***

Hydro Ax 611EX Feller Buncher ***SOLD***

2000 Hydro Ax 611EX Feller Buncher with 22" Koering Head. This machine has a new engine, turbo, main drive motor and main pump are all new 15 hours ago, also new batteries and cables, the main grab arm cylinder are new, has been all pressures tested set and checked. Was used for a few weeks to cut 500 cords of Aspen. New teeth, new glass in cab, main drive gear box and the main hanger bearing were just replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 611EX 2000
$42,900
John Deere 703JH Harvester with a Waratah HTH622B Head

John Deere 703JH Harvester with a Waratah HTH622B Head

2013 John Deere 703JH Harvester with a Waratah HTH622B Head. Hour meter reads ~5,100 hours, Pro Heat system, TimberRite measuring system. This machine is extremely clean and dry. No welding evident on the machine or the head. All panels open as they should. The machine is very tight and clean all around including the 622 head. Undercarriage is @ 75% 24" double grouser pads, tight controls, heat, A/C, and lights. Additional pictures available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information or to set up a viewing of the machine. Machine is located in Northcentral USA.

John Deere 703JH 2013
$275,000
Vermeer BC1800XL Chipper

Vermeer BC1800XL Chipper

2006 Vermeer BC1800XL Chipper. This equipment has a John Deere 6068 175 HP engine, runs and starts good, hour meter reads 5,821 hours, knives and drum are in good order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Vermeer BC1800XL 2006
$20,500
CAT 525 Skidder

CAT 525 Skidder

1997 CAT 525 Grapple Skidder with Winch. Hour meter reads 7,300 hours, runs and starts good, strong hydraulics and transmission, new pins and bushings, steer cylinders have been gone through, flotation tires @ 75% or better, winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 525 1997
$36,500
Timberking 923 with a 2000B Limmit Delimber

Timberking 923 with a 2000B Limmit Delimber

1997 Timberking 923 with a 2000B Limmit Delimber. This equipment runs and starts good, CAT 3306 engine, strong hydraulics and cylinders, drive motors and swing gear are in good order, 22" pads, undercarriage is @ 50%, straight boom, cables and pulleys are in good condition, Risley topping saw, sharp knives. Carrier has been reworked. Heat, A/C, and lights. Has been repainted. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timberking 923 1997
$37,500
Komatsu 911.5 Harvester with Valmet 370.2 Head

Komatsu 911.5 Harvester with Valmet 370.2 Head

2013 Komatsu 911.5 Harvester with Valmet 370.2 Processing Head with rotate and level cab. Machine is in excellent condition for age. Approximately 8,000 hours. 66 AWF 6 cylinder diesel with turbo and intercooler. Head is in very good condition. 710 bogey tires @ 75%. One set of tracks @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu 911.5 2013
$239,000