Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 703JH Processor with Waratah HTH 622B Head

John Deere 703JH Processor with Waratah HTH 622B Head

2014 John Deere 703JH with Waratah HTH 622B Head. This machine has 4,000 hours, Pro-Heat system, undercarriage is @ 90%, strong hydraulics and cylinders, no leaks, tight controls, computer and measuring system are all in good working order. Waratah 622B head has good feed rollers and grab arm, everything is in good working condition. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703 JH 2014
$349,000
Fabtek 344B Forwarder

Fabtek 344B Forwarder

: Fabtek 344B Forwarder. Well maintained machine with approximately 15,000 hours. Good rubber, new injectors, hydraulic pump recently re-sealed. Excellent running, very dependable machine.

Fabtek 344B 2003
$82,500
2001 Timberjack 1710B c/w 2 sets of tracks $85,000

2001 Timberjack 1710B c/w 2 sets of tracks $85,000

2001 Timberjack 1710B forwarder in very good condition, double extension crane Fully serviced ready for work New grab Reconditioned engine New centre section Good tyres all around Good spare wheel Front tracks (90%) Back tracks (70%) Can be seen in Salem NY

Timberjack 1710B 2001
$85,000
SOLD 2011 Komatsu 941.1

SOLD 2011 Komatsu 941.1

2011 Komatsu 941.1 9980 hours comes with 2014 C144 head 2500 hours Comes with 2 sets of tracks Front set (80%) Back set (95%) Box of chains (approx 30) Box of saw bars (approx 5) Machine in very good condition fully serviced and checked ready for work

- - -
$Call for Price
Timberjack 240C Cable Skidder ***SOLD***

Timberjack 240C Cable Skidder ***SOLD***

1999 Timberjack 240C Cable Skidder with a NEW Cummins 4BT engine, 4 speed Eaton Fuller transmission and heavy duty Eaton axles. Tight center, cradle, blade pins and bushings. New bearings all around, new brake pads, and new winch cable on T40 winch. 23.1 x 26 tires @ 25%, new chains on back, front chains are @ 50%. Machine is pulling timber daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 240C 1999
$45,000
John Deere 648GII Skidder

John Deere 648GII Skidder

2000 John Deere 648GII Single Arch Grapple Skidder with Winch. This machine has a newly rebuilt engine, runs and starts good, new hydraulic pump and valve bank, DD transmission in good working order, center will need pins soon, tight grapple and arch, cradles and axles are in good order, 28Lx26 tires @ 70% with chains on front, heat, A/C needs a new hose, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 648GII 2000
$35,500
Valmet 840 Forwarder

Valmet 840 Forwarder

Valmet 840 Forwarder, with 17,000 hours

Valmet 840 -
$45,000
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2004 John Deere 648GIII D/A Grapple Skidder. This skidder runs and starts good, hour meter reads 12,500 hours, strong hydraulics, DD transmission in good working order, tight center section, arch and grapple pins are tight, steer, blade and arch cylinders are in good working condition. 35.5x32 tires with full set of chains and a spare tire, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648GIII 2004
$49,900
Morbark 30/36 Mountain Goat Whole Tree Drum Chipper

Morbark 30/36 Mountain Goat Whole Tree Drum Chipper

2000 Morbark 30/36 Mountain Goat WCL Tracked Whole Tree Drum Chipper. This equipment has 4,700 hours, CAT 3408 575 HP engine, new radiator core, twin disc clutch, Funk gear box, Mor-Lift 250-2 loader, Babbited knives, swivel discharge, Double grouser 600mm undercarriage estimated @ 75% life remaining. Feed chain is in good shape, air compressor, new pin and bushing on loader from main to stick booms. Does not burn oil. A/C and heat work well. Glass is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Chipper is located in Northcentral USA.

Morbark 30/36 Mountain Goat 2000
$269,000
John Deere 640D Skidder

John Deere 640D Skidder

1986 John Deere 640D Cable Skidder. This machine runs and starts good, new clutch this summer, new main cable, 5 new chokers, new U-joints, ring chains all around, 24.5 x 32 tires, tight center pins, nice tight machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 640D 1986
$29,500
Franklin 170 Grapple Skidder

Franklin 170 Grapple Skidder

1978 Franklin 170 Grapple Skidder. This skidder has a 453 Detroit, runs and starts good, replaced wheel seals, 28Lx26 tires, also have dual 28" and 23" tires. Machine is on the job. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Franklin 170 1978
$14,500
Franklin 170 Feller Buncher

Franklin 170 Feller Buncher

1991 Franklin 170 Feller Buncher. Owner stated that this unit has a Detroit 453 turbo engine, runs and starts good, tight center pins and bushings, 22" sheer head in good working order. Owner said that this machine has a strong transmission, good cylinders, may need some pins in boom, tires are @ 85%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Franklin 170 1991
$15,500