Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 848H Skidder

John Deere 848H Skidder

2010 John Deere 848H Dual Arch Grapple Skidder. This equipment runs and starts good, new injectors, new EGR cooler, new turbo, strong hydraulics and cylinders, transmission is in good working condition, new pins and bushings in the arch and grapple, 30.5x 32 tires, track and chains. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 848H 2010
$67,500
Bandit Model 2590 Whole Tree Chipper

Bandit Model 2590 Whole Tree Chipper

2013 Bandit Model 2590 Whole Tree Chipper. This chipper has a CAT C-15 585 HP turbo diesel engine with only 5,900 hours. Wireless remote Control, tandem axle, air brakes. Auto-feed reverse, hydraulic flow regulator, in-feed chain and knives are all in good working order, over the top discharge, pro Heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bandit Model 2590 2013
$115,000
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2005 John Deere 748GIII Dual Arch Grapple Skidder. This skidder has a Torque transmission, 2 new 30.5 x 32 tires, the other 2 are @ 40% with Diamond chains. Dual Arch. tight pins and bushings, strong hydraulics and cylinders, engine runs and starts good. Heat, A/C, and lights. Maintained on regular service schedule. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2005
$57,500
Valmet 860.1 6 Wheel Forwarder

Valmet 860.1 6 Wheel Forwarder

2006 Valmet 860.1 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, 15,850 hours, strong hydraulics, new hydraulic pump, tight center section, axles and bogies are all in good working order, new bogie bearings and seals, tight boom and grapple. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 860.1 2006
$92,500
TimberPro TL-725B Harvester with a Rolly II Head

TimberPro TL-725B Harvester with a Rolly II Head

2011 TimberPro TL-725B Harvester with a Rolly II Head. Hour meter reads 9,700 hours, Cummins 8.3 engine, runs and starts good, new pan gasket and main seal, flex plate was done at the same time, valve banks were gone through and resealed. Espar pre heat system, fire suppression system. Strong hydraulics, and cylinders, drive pumps are in good working order, 2 new final drives. Undercarriage is @ 50%, 24" single grouser pads. Newer house bearing 1,500 hours ago. Rolly II head, grab arms and both bottom and topping saw are in good working condition. Dasa 4 computer, good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TL-725B 2011
$175,000
CAT 518 94U Skidder

CAT 518 94U Skidder

1984 CAT 518 94U Grapple Skidder with Winch. This equipment has a CAT 3406 engine, runs and starts good, CAT 3 speed auto transmission, Transmission was rebuilt 1,500 hours ago, new master cylinder on the front, new rear differential. Esco Grapple, Gearmatic winch has a rusty drum. 23.1x 26 Firestone tires @ 70%, some new glass, brush rack on blade, heater. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 518 94U 1984
$19,900
Vermeer BC1400 Chipper

Vermeer BC1400 Chipper

2006 Vermeer BC1400 Chipper. This equipment has a 14” capacity. This self-feeding drum style chipper is Powered by a Caterpillar turbo diesel engine, runs and starts good, 1,347 hours, been cleaned, serviced, fully tested, knives in good order with extras. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Vermeer BC1400 2006
$16,500
Timberjack 1210 Forwarder

Timberjack 1210 Forwarder

1995-1996 Timberjack 1210 8 Wheel Double Bunk Forwarder. This equipment has a Perkins engine, runs and starts good, strong hydraulics and cylinders few minor leaks, decent center section has a little play, bogies are in good working order. Comes with one set of tracks and spare tire, new Lexon glass. Shift button on control will need some attention but works. Heat, A/C need charging, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1210 1996
$38,900
HAHN 110 Self Propelled Harvester

HAHN 110 Self Propelled Harvester

1984 Hahn 110 Self Propelled Harvester. This machine has a Detroit 353 engine, runs and starts good, strong hydraulics and cylinders, strong pumps, drive system is in working order, tight boom and grapple, rollers, delimber and knives are in good order, strong brakes, heavy duty tires. Also has parts machine, extra orbit motor swing gear, engine and pumps, & boom. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hahn 110 1984
$8,900
Timbco 425EXT Harvester with a 2015 Rolly II Head

Timbco 425EXT Harvester with a 2015 Rolly II Head

2005 Timbco 425EXT Harvester with a 2015 Rolly II Head. This equipment has 8,100 hours, Cummins QSC 8.3L, runs and starts good, Espar pre heat system, strong hydraulics and drive motors, newer undercarriage, 24" double grouser pads. Tight boom, swing gear is in good working order. 2015 Rolly II Processing head with 1,250 hours, upgraded to a Woodland Eaton Computer system with books. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 425EXT 2005
$200,000
Timbco 425C Feller Buncher

Timbco 425C Feller Buncher

1996 Timbco 425C Feller Buncher with a Timbco Bar Saw Head. This equipment has a 8.3 Cummins engine, runs and starts good, strong hydraulics, has newer pumps. Undercarriage is @ 25%, 24" single grouser, strong boom, leveling system seeps over time, Timbco 30" bar saw head is in good order, also has accumulator, heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 425C 1996
$31,500
John Deere 653G Feller Buncher ***SOLD***

John Deere 653G Feller Buncher ***SOLD***

2001 John Deere 653G Feller Buncher with a Waratah FS-22" Felling Head. This machine has a John Deere 6068H engine runs out well, starts reliably, Waratah cutting head is in good shape. Hour meter reads 9,851 hours, undercarriage needs some attention. New bearing in the head, newly replaced jib boom pin, recently serviced and ready for the woods. Sprockets, rollers, idlers, pads are all in good working order, tight pins and bushings all around, clean cab, all gauges work, heat and A/C work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. **SOLD***

John Deere 653G 2001
$51,500