All listings for: RedPineEquipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Hood S-182 Self Propelled Loader ***SOLD***2010 Hood S-182 Self Propelled Loader with a Hood 60" Slasher. This equipment has a John Deere engine, runs and starts good, 7,600 hours, strong hydraulics and cylinders, drive system is in good working order, tight boom and grapple, joystick controls, tires @ 50%, solid carrier, straight disc, good teeth, Heat A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Hood | S-182 | 2010 | $82,500 |
|
Rottne Rapid 8 Wheel Forwarder ***SOLD***2000 Rottne Rapid 8 Wheel Double Bunk Forwarder. This machine has a John Deere engine, runs and starts good, 6,798 hours, new turbo, strong hydraulics and cylinders, bogies are in good working order, tight boom, squirt working as it should, grapple is in good condition, strong transmission, tight center section, blade, tight controls, good glass, heat, A/C, and radio, CD, lights. 710 tires @ 60%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Rottne | Rapid Rapid 8 | 2000 | $75,000 |
|
John Deere 648E Skidder ***SOLD***1993 John Deere 648E Grapple Skidder. This skidder has less than 750 hours on new John Deere engine, runs and starts good, strong hydraulics and transmission, tight center section, grapple is in good order. Brand New Firestone 30.5x32 rear tires. Recently rebuilt valve bank. Many new hoses, all cylinders were repacked. New Seat, good heater. Bear Claw chains on front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
John Deere | 648E | 1993 | $32,500 |
|
John Deere 548D Skidder ***SOLD***1988-89 John Deere 548D Grapple Skidder with Winch. This machine runs and starts good, new water pump, strong hydraulics and transmission, cylinders are in good working order, few minor leaks, tight center section, arch and grapple are in good condition, strong winch. 28Lx26 tires @ 75% with 2 sets of Bear Claw chains - like new. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
John Deere | 548D | 1989 | $34,500 |
|
Timbco 425C Feller Buncher ***SOLD***1995 Timbco 425C Feller Buncher. This equipment has 13,500 machine hours, 2010 - 8.3 Cummins, runs and starts good, new Webasto heater, strong hydraulics, 2 brand new Rexroth pumps, new o-rings in valve bank, all track drive hoses are brand new, strong cylinders, tight pins and bushings. Quadco 22" saw is in good working order, 40 degree rotation, heat, A/C, and lights. Recently serviced and ready to go! Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timbco | 425C | 1995 | $60,500 |
|
Cord King CS2740 Firewood Processor ***SOLD***2006 Cord King CS2740 completely refurbished by Cord King in 2017. This processor has only 143 hours, a 115 HP John Deere engine, over a year left on the warranty. 60" carbide tooth circular saw 27" cut, 58 ton ram, with extra blade, hydraulic folding live deck, auto hydraulic log stop, 20' in-feed conveyor, trap door easy end of log cutting, 6 leg live deck, heated operators cab with plug in A/C, 16 way hydraulic adjustable box wedge, heavy duty hydraulic oil cooler, extra teeth and sharpener. Grizzly debris separator, grapple assist, 28 way wedge, and a 16 way wedge. Tumble King, 20' tumbler, 24' conveyor to load tumbler. 50' offloading conveyor - brand new, has never been used. Many extras and upgrades. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.***SOLD*** |
Cord King | CS27-40 | 2006 | $107,500 |
|
John Deere 748E Skidder ***SOLD***1992-93 John Deere 748E Dual Arch Grapple Skidder. This machine has a Cummins 8.3 engine, starts and runs good, engine has ~ 4-5,000 was a new engine & not rebuilt. Power Shift transmission is in good working condition, pins have a little play, strong hydraulics and cylinders, few minor leaks, new cutting edge on blade. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
John Deere | 748E | 1992 | $32,500 |
|
Timberjack 450 Skidder ***SOLD***1996 Timberjack 450 Grapple Skidder with Winch. This machine has a Cummins 5.9 engine runs and starts good, strong Power Shift transmission, tight center section, strong winch, newer 23.1 x 26 tires. Esco grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 450 | 1996 | $38,500 |
|
Rottne Rapid 6WD 12 Ton Forwarder ***SOLD***1989 Rottne Rapid 6WD 12 Ton Forwarder. This equipment has a 4 cylinder Ford/New Holland engine, runs and starts good. Has around 22,000 hours. Hydrostatic pump and motor were replaced around 6,000 hours ago. Has brand new 600 mm front tires and brand new air compressor for braking system. Has tracks for rear bogies, newer hydraulic oil cooler. Also has a brand new Red Dot air conditioner system. Valve bank will be resealed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Rottne | Rapid | 1989 | $54,000 |
|
Valmet 644 Forwarder ***SOLD***2000 Valmet 644 Single Bunk Forwarder. This machine has 500 hours on a 3.9L 4 cyl. reman engine, Power Shift transmission, tight lever controls, extenda boom, Cranab bypass grapple, tires are @ 75% with chains, strong clean machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Valmet | 644 | 2000 | $55,000 |
|
Complete Recycling Plant ***SOLD***Recycling Plant with Gravel Screen & Rock Crusher. Marathon 165KW generator powered by 6-cylinder Dawoo engine. Dozer-trap 3X7 screen, Lippmann Screen plant, Gator 30'X36" magnet, Shop built 12'X36" magnet, Kue-Ken Crusher with electrical switch gear, Moriang 24"X54' conveyor, 18X30' conveyor, Marco 24"X100' radial stacker with weigh-o-matic scale, Marathon 165KW genset. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. ***SOLD*** |
- | - | - | $99,000 |
|
Kenworth T600 Semi Tractor ***SOLD***2006 Kenworth T600 Semi Tractor. This truck has a Cummins ISX 475 engine, runs and starts good, good brakes and tires, strong transmission, air ride. 12,000 LBS. Front Axle Weight; 40,000 LBS. Rear Axle, 3.55 Ratio, 72" raised roof sleeper. Contact Erik @ Red Pine Equipment 218-720-0933. Truck is located in Northeast USA. ***SOLD*** |
Kenworth | T600 | 2006 | $16,500 |
