All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	John Deere 548D Skidder *SOLD* 1986 John Deere 548D Grapple Skidder with a Winch. Hour meter reads 3,040 hours, only 3 owners, John Deere engine, runs and starts good, strong hydraulics and cylinders, PowerShift transmission in good working order. 28L x 26 tires @ 50% or better. Enclosed cab, heat, & lights. Seat is like new. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. *SOLD*	John Deere	548D	1986	$34,500
	Stripper Mechanical Delimber *SOLD* Stripper Mechanical Delimber. 20' long factory built frame. Drop pin hitch & new tires. Knives are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. *SOLD*	Stripper Manufacturing	-	Unknown	$11,500
	Timberjack 1010B Forwarder *SOLD* 2000 Timberjack 1010B 8 Wheeled Double Bunk Forwarder. Hour meter reads ~25,000 hours. Reman Cummins 4BT engine has 3,000 hours on it. 700 and 28L tires are estimated at 55%, with a set of tracks at 25% to go with. Two of the 28L tires are new. New hydraulic pump and motor 2,000 hours ago. New boom seals, frame brake. Brakes need work. Cab has heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Timberjack	1010B	2000	Call for Price
	Timberjack 1010 Forwarder *SOLD* 1993 Timberjack 1010 6 Wheel Forwarder. Hour meter reads 24,423 hours. Cummins 4BT engine starts and runs good. Strong hydraulics and drive system. Bogies are in good order, brakes are not working, squirt boom and grapple are in good working order, 710 tires estimated at 75%. Straight bunks. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. *SOLD*	Timberjack	1010	1993	Call for Price
	John Deere 648G Skidder *SOLD* 1996 John Deere 648G Dual Arch Grapple Skidder. Starts and runs good, engine has new top end approximately 1,000 Hours ago. Hour meter reads 19,750 hours, grapple resealed and new grapple brakes, has winch but drive shaft currently not on machine, 14 bolt rims and 30.5 x 32 tires in good condition, 2 are new, & 2 are @ 60-70%, completely gone through and ready for woods, heat, lights, no A/C. Plug in block heater. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	John Deere	648G	1996	$33,000
	Eager Beaver 35 Ton Detach Lowboy *SOLD* 1994 Eager Beaver 35 Ton Detach Lowboy with Rear Ramps. This trailer has a few welds on cross members but overall a good tight trailer. Has ramps for both sides. Closed wheel wells. Detach is working like it should, brakes are @ 90% and tires are @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Trailer is located in Northcentral USA. *SOLD*	Eager Beaver	35 Ton	1994	$18,500
	DYNA SC-14 Firewood Processor *SOLD* 2019 Dyna SC-14 Firewood Processor. Hour meter reads 735 hours. 3 leg live deck. 12' conveyor. 4 & 6 way wedges. 14' conveyor. Has a new bar and around $1,000 in 3/4" hydraulic hoses that are included. Oil has been changed every 50 hours and the processor has never been driven through salt. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. *SOLD*	DYNA	SC-14	2019	$33,500
	Ford 8000 Tractor with Loader *SOLD* 1990 Ford 8000 Tractor with Loader. Hour meter reads 904 hours. 6cyl 125 HP diesel engine starts and runs good. 8-speed transmission. Tires are brand new all the way around. Hydraulics are in good working order. Has stubs for duals but the duals are not included. Comes with bucket & set of forks. Grader blade can be included for an additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Ford	8000	1990	Call for Price
	CTR Saw & Reversible Table *SOLD* CTR Saw & Reversible Table. Works as it should. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	CTR	-	Unknown	Call for Price
	Ponsse Scorpion King with H7 Harvester Head *SOLD* 2016 Ponsse Scorpion King with H7 Harvester Head. Hour meter reads 9,000 hours. Mercedes engine starts and runs good. 710 Nokian tires have had balanced bogie tracks on them for the life of the machine. They are at 90%. Tracks are also in good shape. C50 crane is tight. The H7 harvesting head works as it should, roller and feed wheels are in great condition. This machine has auto grease, auto fuel fill pump (from ground), & a 120 gal. fuel tank. Also has a DAFO fire suppression system & Webasto preheater. Enclosed cab has heat, A/C, radio, and LED lights. Seat is heated, cooled, and lockable. Front, side, and skylight wipers. New swing bearing at 6,500 hours, and resealed pumps at 5,500 hours. This is a pre-emission, well-maintained, and well taken care of machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Ponsse	Scorpion King	2016	$325,000
	TimberPro TN725B Harvester with a Rolly II Head *SOLD* 2012 TimberPro TN725B Harvester with a Rolly II Head. Hour meter reads 13,740 hours, Cummins 8.3 engine, runs and starts good. Undercarriage is @ 75%, 28" double grouser pads. Valve banks were just gone through and resealed. Espar preheat system, fire suppression system. Strong hydraulics, and cylinders, all pumps and motors were gone through and rebuilt or replaced in the last year. New wiring harness. Rolly II head, grab arms and both bottom and topping saw are in good working condition. Woodland computer, good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Timberpro	TN725B	2012	$149,000
	CRD Rapido Loco 60 Firewood Processor *SOLD* 2013 CRD Rapido Loco 60 Firewood Processor. Hour meter reads 275 hours. 91 HP diesel engine starts and runs good. 30' conveyor that comes with extra staples. 6-way wedge. Live deck. 60" circular saw that includes a few extra teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. *SOLD*	Woodbine	Rapido Loco	2013	$47,500