All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	Bandit Beast 3680 Horizontal Grinder *SOLD* 1999 Bandit Beast 3680 Horizontal Grinder. Hour meter reads 2,500 hours. CAT C15 475 HP engine starts and runs good. Less than 1,000 hours on engine, clutch, belt, infeed chain, internal chamber, augers, tail shaft, sun gear drive box, & remote. Recently serviced by Bandit. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Bandit	Beast 3680	1999	$145,000
	Peterson 5710C Horizontal Grinder *SOLD* 2015 Peterson 5710C Horizontal Grinder. Hour meter reads 8,490 hours. CAT C27 1,050 HP engine starts and runs good. 23.5" triple grouser pads, undercarriage is in good working order. 60" x 40" feed opening. Remote works well. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. *SOLD*	Peterson Pacific	5710C	2015	$389,500
	GMC 8500 Dump Truck with Rotobec 80 Elite Loader *SOLD* 2002 GMC 8500 Dump Truck with Rotobec 80 Elite Loader. Odometer reads 118,000 miles. Reman CAT engine starts and runs good. Rotobec 80 Elite loader is tight and hydraulics are strong. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. *SOLD*	GMC	8500	2002	Call for Price
	Peterson 4310B Track Chipper *SOLD* 2013 Peterson 4310B Track Chipper. Hour meter reads ~5,400 hours. CAT C18 755hp engine starts and runs good. 36”x45” drum with 12 knives. Babbitt knives system. PT Tech HPTO 14 FX clutch that is new. Sprockets are also new. Includes a Peterson Adaptive Control System Radio Remote. 60 to 120 tons per hour (130,000 LBS. to 260,000 LBS,) depending on wood species, chip size, and moisture content. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. *SOLD*	Peterson Pacific	4310B	2013	$265,000
	Western Star with Serco 8500 Loader *SOLD* 2001 Western Star with Serco 8500 Loader and Pup Trailer. Odometer reads 652,000 miles. CAT C15 600 HP engine starts and runs good. 18 speed transmission shifts well. Steers are new, drives are estimated at 40%. 20,000 LBS. front axles, 46,000 LBS. rear axles. 10,000 LBS. cheater axle. Serco 8500 loader is tight and has a new ICM GRA-R 42 bladeless bucket that was purchased in October of 2021. Pup has been converted into a material trailer. Truck is used daily. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Western Star	-	2001	$56,500
	Ford L9000 Dump Truck 1989 Ford L9000 Dump Truck. CAT 3406B engine starts and runs good. 10 speed transmission shifts well. Drives are new, steers are estimated at 40%. Tag axle works and those tires are estimated at 50%. Air tailgate works as well. Manual tarp. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ford	L9000	1989	$23,500
	John Deere 540B Skidder *SOLD* 1983 John Deere 540B Cable Skidder. Hour meter reads 8,100 hours. John Deere 4045 turbo engine starts and runs good. PowerShift transmission shifts well. Tires are estimated at 30% with new double diamond ice chains on the front and bear claw chains on the rears. Strong winch and tight center. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	John Deere	540B	1983	$23,500
	Western Star 4900 Day Cab w/ Rotobec Loader *SOLD* 2003 Western Star 4900 Day Cab with Rotobec 80 Elite Loader. Odometer reads 775,837 miles. CAT C15 engine starts and runs good, Eaton Fuller 9 speed transmission shifts well. Tires are estimated at 80%. Rotobec 80 Elite loader is tight, SuperGrip grapple is tight. Double frame. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Western Star	4900	2003	$61,500
	John Deere 703G Harvester 2006 John Deere 703G Harvester. This equipment has 15,430 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 50%, new tracks, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	703G	2006	$92,500
	Blacks Creek 2500 Firewood Processor *SOLD* 2020 Blacks Creek 2500 Firewood Processor with Conveyor. No hour meter, hours are estimated at 450 hours. 2 leg live deck. Hydraulic log clamp and saw bar sweep. 12” to 24” adjustable in 2” increments firewood cutoff lengths. Adjustable four-way wedge. 23" max log diameter. Includes a 24' Black Creek 2440 Conveyor. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. **SOLD*	Blacks Creek	2500	2020	$34,000
	Komatsu 840.4 Forwarder *SOLD* 2012 Komatsu 840.4 8W Forwarder. Hour meter reads 12,000 hours. 710 tires are estimated at 60%. Set of tracks to go with that have only seen 3 winters. Webasto preheater. CRF 8.1 crane. Hultdins SuperGrip grapple. Has a newer drive motor that was put in at 8,000 hours. New lift cylinder, new bucket cylinder, newer bucket, new module for frame lock, and new computer. Tight center section. Well maintained machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA *SOLD*	Komatsu	840.4	2012	$134,900
	Bell's 6000 Firewood Processor *SOLD* 2013 Bell's 6000 Firewood Processor. CAT C4.4 engine runs and starts good. Has a fixed 16 way wedge & comes with an additional new 16 way splitting wedge. Push cylinder on splitter has been rebuilt. Has a brand new Eastonmade 32' conveyor that can be included for an extra $5,000 that was $10k. This processor has been very well maintained. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Bell	6000	2013	$86,500