Slasher/Loader For Sale

Sort By:   GridGallery
Photo Title
Make Model Year Price
2000 TIMRICK 2750 Slasher Loader

2000 TIMRICK 2750 Slasher Loader

Call for pricing. 6068 engine has only 7,500hrs. Call for complete work order info ($80,000 work order completed 647hrs ago): All Booms re-pinned/bushed. Align-boring done where required. All Hydraulics Rebuilt. New Hoses. All Cylinders Rebuilt. Swing Boxes Rebuilt... Too much to fully list!

Timrick 2750 2000
$Call for Price
Barko 160A Loader on a Mack Truck w/Sirro 60" Slasher *SOLD*

Barko 160A Loader on a Mack Truck w/Sirro 60" Slasher *SOLD*

1993 Barko 160A Loader on a Mack Truck with Sirro 60" Slasher. This equipment has a Cummins 5.9 engine that will need attention. Mack truck, Sirro 60" in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Located in Northcentral USA. ***SOLD***

Barko 160A 1993
$8,000
Barko 495ML Magnum Loader with Delimber and Ground Saw

Barko 495ML Magnum Loader with Delimber and Ground Saw

2012 Barko 495ML Magnum Loader Delimber and Ground Saw. This machine has 2,698 hours, a Tier III Cummins engine, runs and starts good, strong hydraulics, tight boom and Rotobec grapple, CSI delimber and ground saw are in good working order, Pitts carrier has good brakes and tires, no miles. Heat, A/C, and light. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Barko 495ML 2012
$Call for Price
Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

2008 Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher and a Savage Carrier. This equipment has 8,500 hours, engine was rebuilt 6,000 hours, runs and starts good, strong hydraulics and cylinders, self propulsion in good working order, tight boom and grapple, slasher is in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 495ML 2008
$109,000
CAT 559C Log Loader

CAT 559C Log Loader

2015 CAT 559C Log Loader with a CSI 265 Ultra Delimber and a CSI DL4400 Buck Saw. This equipment has 4,700 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, live heel, tight pilot controls. Delimber and buck saw are in good working order. Pitts carrier has good brakes and tires, down riggers and cylinders are in good working condition. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 559C 2015
$165,900
Caterpillar 559 Loader Slasher and Delimber TMS Package

Caterpillar 559 Loader Slasher and Delimber TMS Package

2013 Caterpillar 559 Loader Slasher and Delimber TMS Package. This equipment has 7,700 hours. Big John carrier, Rotobec 5052 grapple, Propac 500 ground slasher, CSI 264 delimber. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 559 2013
$150,000
GMC Loader Truck with Hood Loader and Slasher

GMC Loader Truck with Hood Loader and Slasher

1988 GMC Loader Truck with Hood Loader and Slasher. This truck has a newer CAT 3408 engine, runs and starts good, 13 speed Fuller transmission, good brakes and tries, Loader has a Detroit 4 cyl. engine, runs and starts good, new hydraulics pump, lever controls, decent pins and bushings on boom and grapple, 52" carbide blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

GMC - 1988
$12,900
Hood 182 Loader with a Joe Dog Slasher Table ***SOLD***

Hood 182 Loader with a Joe Dog Slasher Table ***SOLD***

1983 Hood 182 Loader with a Joe Dog Slasher Table. Owner stated that this unit has a John Deere, engine runs and starts good, new Turbo with 80 hours, strong hydraulics, tight pins and bushings. Owner said that this slasher has a 60" blade, box of teeth and insert tool go with, tight controls, tires and brakes are okay. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SOLD***

Hood 182 1983
$24,500
Hood 20000 6x6 Self Propelled Loader with Slasher

Hood 20000 6x6 Self Propelled Loader with Slasher

1998 Hood 20000 6x6 Self Propelled Loader with Slasher. This equipment has a 6068 John Deere engine, runs and starts good, strong hydraulics, tight boom and continuous grapple, live heel, 13,000 hours. 60" Hood saw. Folding/sliding butt board, carrier is in good order but does need brakes, heat, A/C, block heater, and quick couplers. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hood 20000 1998
$29,500
Hood 20000 Loader w/ 60' Slasher

Hood 20000 Loader w/ 60' Slasher

1998 Hood 20000 Loader with a 60" Hood Slasher. Owner stated that this loader has a John Deere 6 cyl motor, runs and starts good, strong hydraulics, tight pins and bushings. Owner said that this unit has a 30' boom, new vickers pump, 1/3 cord Hood bypass bucket with continuous rotation, 12000 hours, joystick controls, Hood 6x6 carrier, heat. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***REDUCED FROM $58,500.00***

Hood 20000 1998
$55,500
Hood 24000 Loader

Hood 24000 Loader

1989 Hood 24000 Truck Mounted Loader with a Hagen Slasher. This machine has a John Deere engine with 2,000 hours, pump was updated at the same time, Rotobec grapple, loader has tight pins and bushings in boom, cylinders are in good condition, 1994 Hagen Slasher has a 60" blade, 16' bed pump has been gone through, mounted on a Cane truck with a 290 Cummins and a 10 speed, good tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hood 24000 1989
$27,500
Hood 24000 Loader

Hood 24000 Loader

1990 Hood 24000 Loader with Rotobec bucket and 60" CTR Slasher. This machine has a John Deere engine, has been rebuilt, runs and starts good, mounted on a 1979 Mack truck, strong hydraulics, lever controls, boom in working condition. Not DOT inspected. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hood 24000 1990
$36,000