Sort By:   GridGallery
Photo Title
Make Model Year Price
2008 Morbark 40/36 Chipper

2008 Morbark 40/36 Chipper

MORBARK 40/36 DRUM CHIPPER 6 CYL DEERE

Morbark 40/36 2008
$189,000
2009 All Tech DC912A Chipper

2009 All Tech DC912A Chipper

ALL TECH DC912A 12" CHIPPER SELF FEED KUBOTA 54HP DIESEL PINTLE HITCH

ALL TECH DC912A 2009
$18,000
Bandit 1290 Chippers

Bandit 1290 Chippers

1993-1997 Bandit 1290 Chippers, 14 Available. These chippers have new wheel bearings, rebuilt carburetors, alternators, and starters. Sandblasted and painted, new knives or re-sharpened, re-lined gas tanks, clutches as needed, new ignition cap rotor wires. They all have the Ford straight 6 300 cubic inch engine, run and start good. Contact Erik @ Red Pine Equipment 218-720-0933. Machines are located in Northeast USA.

Bandit 1290 1993
$9,500
Bandit 2400 Whole Tree Chipper

Bandit 2400 Whole Tree Chipper

2004 Bandit 2400 Whole Tree Chipper. Owner stated that this machine has 3,500 hours, 3412E CAT 860 HP engine, runs and starts good, updated 3 blade disc, strong hydraulics, tight pins and bushings, feed rollers in good working condition. Owner said that this chipper has new bearings 500 hours ago, resealed cylinders and replaced the boom cylinder rod, pilot controls, new rims and tires, good brakes. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Bandit 2400 2004
$135,500
Bandit 280XP Chipper

Bandit 280XP Chipper

2006 Bandit 280XP Chipper. This machine has been completely refurbished in 2017 with a new CAT C4.4 engine, 183 hours, 18” capacity. Winch kit. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Bandit 280XP 2006
$48,500
Bandit 3090 Whole Tree Chipper

Bandit 3090 Whole Tree Chipper

2017 Bandit 3090 Whole Tree Chipper. This equipment has a CAT C18 765 HP engine, rebuilt by CAT at 800 hours due recall. New pistons and rings, 1,200 hours. This machine is in Like New condition. Remote mounted radiator, tether remote, wireless remote, 2 Emergency shutoffs. Inline hydraulic fan, Proheat engine heater. Extra large hydraulic landing gear. Saylor air compressor with 15 gallon tank. Deluxe LED light package, remaining CAT Warranty until November 2022 or 5,000 hours. Drum warranty by Bandit till 2022. Extra knives and belts. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bandit 3090 2017
$Call for Price
Bandit 3590 XL 36" Drum Chipper ***SOLD***

Bandit 3590 XL 36" Drum Chipper ***SOLD***

2016 Bandit 3590 XL 36" Drum Chipper. This machine has a 1200 HP C32 CAT tier II engine - CAT 5 year Platinum warranty, approx. 1,175 hours remaining warranty on chipper, strong hydraulics. Remote control, PT tech clutch, 56" Flexxaire auto reversing fan, feed chain is in good order. Super single tires. Pro Heat system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Bandit 3590 2016
$460,000
Bandit Model 2590 Chipper

Bandit Model 2590 Chipper

2012 Bandit Model 2590 Chipper. MTHis chipper has a CAT C15 540 HP engine, runs and starts good with 4,000 hours. Wireless Control, Auto-feed System, in-feed conveyor, hydraulic tongue tandem axle with air brakes. Ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bandit 2590 2012
$235,900
Bandit Model 2590 Whole Tree Chipper

Bandit Model 2590 Whole Tree Chipper

2013 Bandit Model 2590 Whole Tree Chipper. This chipper has a CAT C-15 585 HP turbo diesel engine with only 5,900 hours. Wireless remote Control, tandem axle, air brakes. Auto-feed reverse, hydraulic flow regulator, in-feed chain and knives are all in good working order, over the top discharge, pro Heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bandit Model 2590 2013
$165,000
Dynamic Cone-Head 570 Chipper

Dynamic Cone-Head 570 Chipper

2011 Dynamic Cone-Head 570 Chipper. Hour meter reads 596 hours, Cummins engine, runs and starts good, strong hydraulics and pump, pull hitch was extended so it could be pulled with a roll off truck but can be shortened. Remote control to go with so you can run from the loading equipment, 34" In-Feed, 4-7" Blades, electric brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Dynamic 570 2011
$46,500
Dynamic Model 585 23" Chipper

Dynamic Model 585 23" Chipper

2008 Dynamic Model 585 23" Chipper. Machine has a John Deere 500 HP. Fuel consumption ~8 gallons/hour. 30 ton chipping in 30-45 minutes depending on material. Chips tops very well with side feed rollers, 23" max capacity, 3 feed chains on feed bed, comes with remote control, chute is non-variable, always pointing 180 degrees from feed table. Grapple hook for moving with skidder, pintle hitch. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Dynamic 585 2008
$59,900
Mobark 2355 Flail Total Chip Harvester

Mobark 2355 Flail Total Chip Harvester

2008 Mobark 2355 Flail Total Chip Harvester. This machine has 10,000 hours, 3412E CAT engine, runs and starts good, strong hydraulics, Morlift 500 loader, debarker is in good working order, discharge conveyor, tilt cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Morbark 2355 2008
$199,500