Featured in Slasher/Loader

Sort By:   GridGallery
Photo Title
Make Model Year Price
60" Slasher Bucksaw Combo

60" Slasher Bucksaw Combo

60" Slasher Bucksaw Combo. 21' length. Blade pumps are in good condition, unit works as it should. Pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

- 60" -
$17,500
60" Slasher Saw

60" Slasher Saw

60" Slasher. In good working order. This equipment has a straight blade, good teeth, & solid frame. Strong hydraulics and pump, good tires, pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

- 60" -
$7,000
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D -
$17,500
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Mack - 1976
$26,500
International with Rotobec Loader ***SOLD***

International with Rotobec Loader ***SOLD***

1979 International with Rotobec Loader and Siiro Slasher. CAT 3802 engine starts was recently rebuilt. 15,000 miles, 1,200 hours since the overhaul. New input bearing, pump drive, & suction lines. Rotobec continuous grapple, dead heel, & lever controls. Siiro slasher saw motor has been rebuilt, includes an extra pump, new saw blade, two boxes of teeth, hydraulic cylinders, stroke slasher, and another complete saw ring. Also includes another tube, full chassis, bangboard, and extra knives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

International Siiro 1979
$Call for Price
Prentice 210D Loader with Adjustable Buck Saw

Prentice 210D Loader with Adjustable Buck Saw

1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 210D 1984
$18,500
Hood S182 Loader ***SOLD***

Hood S182 Loader ***SOLD***

1985 Hood S182 Loader on a 6x6 Truck with a Siiro 60" Slasher. This loader has a Deutz 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, has a few hydraulic leaks, lever control, boom has been repinned. 1/3 cord bypass bucket, live heel, loader has heat but no A/C. Truck has a Cummins 8.3 engine, runs and starts good, 6,500 miles on odometer, Allison automatic transmission, front mounted winch. Siiro 60" slasher with butt plate, blade is straight but may need a few teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S182 1985
$Call for Price
Hood S-182 Self Propelled Loader w/ Hood 60" ***SOLD***

Hood S-182 Self Propelled Loader w/ Hood 60" ***SOLD***

1985 Hood S-182 Self Propelled Loader with a Hood 60" Pull Behind Slasher. This equipment runs and starts good, strong hydraulics and cylinder, decent boom and 1/3 cord Bypass grapple, dead heal. Lever controls. Carrier and drive system are in working order. Slasher has a straight blade and decent teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S-182 1985
$Call for Price
Hood Loader with 60" Slasher

Hood Loader with 60" Slasher

1989 Hood Loader with 60" Slasher. 1500 hours on rebuilt 6.8L engine. Tight boom, slasher works as it should with strong hydraulics. Enclosed cab with lever controls. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Hood - 1989
$29,900
Lemco 2500 Series Log Loader with a Lemco 60" Slasher

Lemco 2500 Series Log Loader with a Lemco 60" Slasher

1992 Lemco 2500 Series Truck Mounted Log Loader with a Lemco 60" Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, live heal, 4 out riggers. Slasher has a straight blade, good teeth, butt board. Truck runs good, has decent tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Lemco 2500 1992
$29,500
Siiro 60" Adjustable Slasher Table ***ON HOLD***

Siiro 60" Adjustable Slasher Table ***ON HOLD***

1993 Siiro 60" Adjustable Slasher Table. This equipment is set up to cut 8' and 16' logs, newer saw motor 1,000 hours ago, strong hydraulics, straight disc could use a few teeth, solid frame, decent tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

Siiro 60 1993
$7,500
Serco 170 Loader with Siiro 60" Slasher

Serco 170 Loader with Siiro 60" Slasher

1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 170 1993
$44,500