Sort By:   GridGallery
Photo Title
Make Model Year Price
Roto Flow Wood Chip Screen

Roto Flow Wood Chip Screen

Roto Flow Wood Chip Screen. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Roto Flow - -
$6,500
Morbark 22RXL Chipper

Morbark 22RXL Chipper

1979 Morbark 22RXL Chipper. This machine has a 600hp Cummins engine, runs and starts good, strong hydraulics, tight boom and grapple, chipper is in good working condition, tires and brakes were recently done, also has a spare parts machine available for $25,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada.

Morbark 22RXL 1979
$64,900
Morbark 22RXL Whole Tree Chipper

Morbark 22RXL Whole Tree Chipper

1980 Morbark 22RXL Whole Tree Chipper. This chipper has a newer Cummins engine, new clutch, some new feed roller bearings, good knives and belts, runs and works. Good tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 22RXL 1980
$44,500
Morbark 22RXL Chipper

Morbark 22RXL Chipper

1980's Morbark 22RXL Chipper. This machine has 600 hours on a Cummins K18 engine, newer twin disc clutch, 5/8 chips, feed chain is in decent condition, strong hydraulics, carrier is ready to go. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 22RXL 1986
$40,000
Morbark 20 Whole Tree Chipper

Morbark 20 Whole Tree Chipper

1988 Morbark 20 Whole Tree Chipper. This equipment has a 855 Big Cam Cummins engine, runs and starts good, 200 gallons of fresh fuel, new oil and filters, this is a newer engine not original, strong hydraulics, newer 2" return line, new batteries, knives and jig are in good order, 7/8 chips, newer exhaust, good tires and rims, cab is heated. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 20 1988
$26,500
Morbark 23 WCL Chipper ***SALE PENDING***

Morbark 23 WCL Chipper ***SALE PENDING***

1988 Morbark 23 WCL Chiparvestor Whole Tree Chipper. This machine was completely gone through, hour meter reads 1,200 hours, has a CAT 3412 850 HP engine, runs and starts good, engine was 1150 HP turned down to 850 HP, new clutch, knives and disc are in good work order, hydraulic feed wheel is in good condition, Morlift 500 loader, good brakes, and tires. Has a Morbark feed table to pin to the machine that can be purchased separately. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SALE PENDING***

Morbark 23 WCL 1988
$175,000
Bandit 1290 Chippers

Bandit 1290 Chippers

1993-1997 Bandit 1290 Chippers, 14 Available. These chippers have new wheel bearings, rebuilt carburetors, alternators, and starters. Sandblasted and painted, new knives or re-sharpened, re-lined gas tanks, clutches as needed, new ignition cap rotor wires. They all have the Ford straight 6 300 cubic inch engine, run and start good. Contact Erik @ Red Pine Equipment 218-720-0933. Machines are located in Northeast USA.

Bandit 1290 1993
$9,500
Trelan 23L Chipper

Trelan 23L Chipper

1994 Trelan 23L Chipper with Loader. Owner stated that this machine has a 3412 CAT motor with 487 hours on rebuild. Owner said that this unit has tight pins and bushings, strong hydraulics, joystick controls. Call for more Info. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Trelan 23L 1994
$109,900
Morbark 22 Whole Tree Chipper ***SOLD***

Morbark 22 Whole Tree Chipper ***SOLD***

1994 Morbark 22 Whole Tree Chipper. This chipper has a CAT 3412 850 HP engine, runs and starts good, 5,500 hours, strong loader tight boom, cab heat, joystick controls, new clutch in Jan. 2015, disc and chute have been rebuilt, 13 HP Honda air compressor, 14 extra sets of knives, extra chute, 4 cylinder cold weather pre-heater, tires are @ 90%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Morbark 22 1994
$83,900
Timberjack 1270 Rail Chipper

Timberjack 1270 Rail Chipper

1995 Timberjack 1270 Rail Chipper. This equipment has 13,200 hours, Re-manufactured Perkins 1006T engine, 160 HP, 6,300 hours on reman. Chipper head is a Bandit 250XP, 2,500 hours, 12" capacity, chipper engine is a Cummins 6BT with 2,200 hours, 145 HP. Loader is a Nokka 3966 23' reach 3,000 LBS. lift capacity, All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. Rail track system. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberjack 1270 1995
$53,900
Timberjack 1270 Converted to a Chipper ***SOLD***

Timberjack 1270 Converted to a Chipper ***SOLD***

1995 Timberjack 1270 Carrier. This chipper has 12,983 hours, Remanufactured Perkins 1006T Engine 160HP 6,000 hours on reman. Chipper head is a Bandit 250XP with 2,200 hours, 12" capacity, chipper engine is a Cummins 6BT 2,200 hours 145HP. Loader is a Nokka 3966, 23' reach, 3,000 LBS. lift capacity. All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. The 1270 is a 1995. The Bandit chipper head is a 2003 and was installed new. The machine was built in 2006. Seller is open to reasonable offers. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA. ***SOLD***

Timberjack 1270 1995
$45,500
Morbark 2455 Total Flail Chiparvestor Combo Machine

Morbark 2455 Total Flail Chiparvestor Combo Machine

1995 Morbark 2455 Total Flail Chiparvestor Combo Machine. This machine has a 3412 CAT 800 HP engine and a 3306 325 HP CAT engine, they both run and start good. Both have been updated. 27" capacity, updated key knife system, updated to an auger and bark pusher. Strong hydraulics and pumps, well maintained, Debarker is in good working order - just replaced flail, strong hydraulics and cylinders, Morlift 500 loader with cab, heat, A/C, and lights. Tri axle carrier has good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Morbark 2455 1995
$125,000