Featured in Logging Equipment

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Photo	Title	Make	Model	Year	Price
	Tigercat 822 with LogMax 7000 Dangle Head 2005 Tigercat 822 with LogMax 7000 Dangle Head. Hour meter reads 32,000 frame hours. Well maintained. 24" single grouser pads, undercarriage is estimated at 80%. LogMax 7000 dangle head is in good condition, measuring system is in working order. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Tigercat	822	2005	$51,500
	Franklin Q90 Skidder 2005 Franklin Q90 Grapple Skidder with Winch. Hour meter reads 6,490 original hours. Cummins 8.3L engine starts and runs good. 30.5x32 tires, 2 are estimated at 85%, the other 2 at 10%. Dual rings on the front. Winch is in good working order. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.	Franklin	Q90	2005	$30,000
	John Deere 2054 with Denharco 4100 Delimber 2005 John Deere 2054 with Denharco 4100 Delimber. Hour meter reads 13,000 hours. Undercarriage has all new chains on both sides, estimated at 75%. New oil cooler, inner and outer booms were recently rebuilt. Denharco 4400 Delimber is straight and in good working order, topping saw. Parts from a Denharco 4400 delimber are available for additional cost. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	2054	2005	$Call for Price
	Ponsse Ergo Harvester 2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$85,000
	Valmet 840.2 Forwarder 2005 Valmet 840.2 8 Wheeled Forwarder. Hour meter reads 23,634 hours. Sisu engine starts right up and runs good. Turbo is in good condition. 700/45-26.5 tires are estimated at 40%, includes a set of tracks estimated at 50%. Blade option. Bucket has some wear and the main boom cylinder has a minor leak around the vapor seal. Webasto preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Valmet	840.2	2005	$56,900
	Timbco 425 EXL Processor with Log Max 6000 Head 2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timbco	425 EXL	2005	$34,500
	Serco 170A Loader with Siiro 60" Slasher *SOLD* 2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Serco	170A	2005	$57,500
	Valmet 425EX Feller Buncher with Quadco 22B 360° Head 2005 Valmet 425EX Feller Buncher with Quadco 22B 360° Head. Hour meter reads ~14,800 hours. Newer Cummins QSC 8.3 engine installed in 2017 with 4,000 hours. 24" double grouser pads, undercarriage is estimated at 60% with new rails and sprockets installed in 2021. New saw pump & bearing, all new cylinders, rebuilt injector pump. Quadco 22B is a 360° head, knives & disc are good. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Valmet	425EX	2005	$75,000
	John Deere 648GIII Skidder 2005 John Deere 648GIII Skidder. Hour meter reads 12,600 hours. John Deere 6068H engine, new engine was installed at 8,500 hours. 35.5x32 tires are estimated at 45%, includes two sets of chains that are estimated at 40%. Center pins and arch pins are tight. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	648GIII	2005	$57,500
	John Deere 648GIII Skidder *SOLD* 2005 John Deere 648GIII Dual Arch Grapple Skidder. Hour meter reads ~15,000 hours. John Deere 6068 engine starts and runs good, new engine 1,500 hours ago. Torque converter transmission shifts well. 30.5x32 tires are estimated at 80%. 2 sets of chains are included. Tight center, arch cylinders are in good working order. Cab has heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	John Deere	648GIII	2005	$Call for Price
	John Deere 648GIII Skidder *SOLD* 2005 John Deere 648GIII Dual Arch Grapple Skidder. 14,000 hours. Full engine rebuild, including sleeves, pistons, rings, injectors, & turbo. 73/44-32 tires, 30-50% on dual rims with chains that are estimated at 70%. All pins and bushings are tight, steer cylinder pins & bushings are brand new. Enclosed cab has heat, A/C and lights. $61,500 with the dual rims, $56,000 without them. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	John Deere	648GIII	2005	$Call for Price
	John Deere 643H Feller Buncher with FD55 Head 2005 John Deere 643H Feller Buncher with FD55 Head. Hour meter reads 7,500 hours. John Deere 6068 engine starts and runs good. 28Lx26 tires are estimated at 40%, includes a set of chains. Disc and bearing in the FD55 head is in good condition. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	643H	2005	$64,500