Slasher/Loader For Sale
Featured in Slasher/Loader
Photo |
Title
|
Make | Model | Year | Price |
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Mack | - | 1976 |
$26,500
|
|
International Truck w/Prentice 180D & 60" Siiro Slasher1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Siiro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | - | Unknown |
$22,900
|
|
Hood Loader with 60" Slasher1989 Hood Loader with 60" Slasher. 1500 hours on rebuilt 6.8L engine. Tight boom, slasher works as it should with strong hydraulics. Enclosed cab with lever controls. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Hood | - | 1989 |
$29,900
|
|
GMC General with Prentice 110 Loader1986 GMC General with Prentice 110 Loader. Cummins 400hp engine, 13 speed manual transmission. All new 11R22.5 tires. Prentice 110 loader is strong, has a little slack. Butt bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | 110 | Unknown |
$11,000
|
|
Western Star Truck with Serco 125 Loader & Siiro 60" Slasher1981 Western Star Truck with a 1994 Serco 125 Loader and Siiro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Serco | 125 | 1994 |
$27,900
|
|
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 160D | 1999 |
$44,500
|
|
Serco 170 Loader with Siiro 60" Slasher1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Serco | 170 | 1993 |
$44,500
|
|
Serco 170A Loader with 60" Slasher2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Serco | 170A | 2001 |
$39,500
|
|
Serco 170A Loader with Siiro 60" Slasher ***SOLD***2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 170A | 2005 |
$57,500
|
|
Serco 170A Loader ***SOLD***Serco 170A Loader on International 1900S with Lemco 60" Slasher. John Deere recon engine that was only ran in winter. New pump drive and main shafter bearing on the loader. Pump was recently resealed. Newer swing bearing. Outriggers in good working order. 30' boom with bypass bucket. International 1900S tandem axle truck, DT466 and clutch were just rebuilt. Lemco 60" slasher, blade reconditioned a year ago with 300 cords ran through since, newer teeth. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 170A | Unknown |
$45,000
|
|
Serco 170B Self-Propelled Loader w/ 60" Siiro Slasher2005 Serco 170B Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 14,000 hours. John Deere engine. Boom and bucket are tight. 6x6 self-propelled carrier. Siiro 60" slasher has new teeth. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Serco | 170B | 2005 |
$Call for Price
|
|
FORD 8000 with Prentice 210C and Siiro 60" SlasherPrentice 210C Mounted on a 1980 FORD 8000 Truck with a Siiro 60" Slasher. Hour meter reads 10,639 hours. CAT 3208, yard truck. Cummins 6BT in the loader. Lever controls, swing bearing and boom are tight, dead heel. Siiro 60" slasher has minimal welding, disk & teeth are good, bangboard has a crack that could be welded. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | 210C | Unknown |
$16,500
|