Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Hood Self-Propelled 6x6 Carrier2005 Hood Self-Propelled 6x6 Carrier. Military axles. Removed from a Hood 24000, 11.00-20 tires estimated at 70%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hood | - | 2005 |
$6,500
|
|
Timberjack 1270D Harvester with a 2012 Waratah H270 Head2005 Timberjack 1270D Harvester with a 2012 Waratah H270 Head. This equipment has a John Deere 6081 engine, runs and starts good, Espar pre heat. Timbermatic 300 computer in good working order. Strong hydraulics, and cylinders. Tight boom and head, boom base has been reworked, replaced cylinder, extended boom has been redone, 700 tires and tracks, tracks are @ 70%, new front glass, sides are in good shape, cab rotation and level is in good working order. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 1270D | 2005 |
$159,500
|
|
Fabtek 133 with Fabtek 4 Roller Processing Head2005 Fabtek 133 with Fabtek 4 Roller Processing Head. Hour meter reads 18,979 hours, crane hours read 8,635 hours. John Deere 6068 engine. 24" double grouse pads, undercarriage is estimated at 90%. Proheat preheat system. FT18 processing head has good feed wheels, minimal welding, & working measuring system. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 133 | 2005 |
$90,000
|
|
Serco 170A Loader with Siiro 60" Slasher ***SOLD***2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 170A | 2005 |
$57,500
|
|
Serco 170B Self-Propelled Loader w/ 60" Siiro ***SOLD***2005 Serco 170B Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 14,000 hours. John Deere engine. Boom and bucket are tight. 6x6 self-propelled carrier. Siiro 60" slasher has new teeth. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Serco | 170B | 2005 |
$Call for Price
|
|
John Deere 2054 with Denharco 4100 Delimber2005 John Deere 2054 with Denharco 4100 Delimber. Hour meter reads 13,000 hours. Undercarriage has all new chains on both sides, estimated at 75%. New oil cooler, inner and outer booms were recently rebuilt. Denharco 4400 Delimber is straight and in good working order, topping saw. Parts from a Denharco 4400 delimber are available for additional cost. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 2054 | 2005 |
$Call for Price
|
|
Link Belt 210LX with Denharco 4150 Boom Delimber ***SOLD***2005 Link Belt 210LX with Denharco 4150 Boom Delimber. This equipment has Isuzu power, valves were set recently, runs and starts good. Hour meter reads 23,800 hours. New boom, swing bearing, rails, sprockets and rollers in the last 800 hours. Strong hydraulics, pumps were recently gone through. New plumbing for heat and A/C. New blades and pins for topping knives. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Link Belt | 210LX | 2005 |
$Call for Price
|
|
Bandit 280 Chipper with Grapple & Winch2005 Bandit 280 Chipper with Grapple & Winch. Hour meter reads 1,300 hours on engine, 875 hours on auto feed. Newer 275 HP engine was installed. Includes extra knives, anvil, & bolts. Pintle hitch. Rated for 18" logs but can chip bigger. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast. |
Bandit | 280 | 2005 |
$84,500
|
|
Timberking 360 Feller Buncher2005 Timberking 360 Feller Buncher. New paint job equipped with a Waratah Saw Head. Engine has 6,102 original hours Tires are 28L x 26 at 90% tread, tight center section, enclosed cab with heat, Radio and Air Conditioning, new starter, new battery with new hydraulic hoses. Machine is 9'6" wide, extremely fast cutter. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Timberking | 360 | 2005 |
$46,500
|
|
Timbco 415EX with Valmet 370E Processing Head2005 Timbco 415EX with Valmet 370E Processing Head. Frame hours are unknown, hour meter reads 6,508 hours. Sisu engine starts and runs good. Reversing fan in working order, new alternator. 24" double grouser pads, undercarriage is estimated at 85%. Pins, bushings, and swing bearing are tight. Squirt boom. Valmet 370E processing head is in good working order, one feed wheel motor could be resealed. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timbco | 415EX | 2005 |
$57,500
|
|
Timbco 425 EXL Processor with Log Max 6000 Head2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 425 EXL | 2005 |
$34,500
|
|
Timbco 425EXL with 2015 Rolly II Processing Head2005 Timbco 425EXL with 2015 Rolly II Processing Head. Hour meter reads 9,257 hours. Cummins 8.3L engine was fully rebuilt at 8,900 hours. 24" single grouser pads, newer undercarriage estimated at 90%. 2015 Rolly II processing head is in good condition, measuring system is in working order. Woodland computer system, heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 425 EXL | 2005 |
$166,500
|