Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Vermeer WC2300XL Chipper ***SOLD***2011 Vermeer WC2300XL Chipper. Hour meter reads 3,973 hours. CAT C13 448 HP engine starts and runs good. Current owner has owned it since 250 hours, was county owned for the first 250 hours. Has a new feed chain, clutch, and belly pan. Oil changed every 200 hours. Includes extra knives. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Vermeer | WC2300 XL | 2011 |
$Call for Price
|
|
2011 Timberpro TN725BMachine has 6800 Hrs. with an Updated computer system. |
Timberpro | TN725B | 2011 |
$Call for Price
|
|
TimberPro TL735B with Quadco 22B 360° Head2011 TimberPro TL735B with Quadco 22B 360° Head. Hour meter reads 11,600 hours, hour meter quit working this spring. Cummins 8.3L engine. 24" single grouser pads, undercarriage is estimated at 70%. New injectors and newer front window. Quadco 22B 360° is in good condition, disc & teeth are good, minimal welding on the head. Leveling system is in working order. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Timberpro | TL735B | 2011 |
$170,000
|
|
Tigercat T250B Track Loader2011 Tigercat T250B Track Loader. 17,500 frame hours, new engine with 650 hours. New hydraulic pump. 24" triple grouser pads, undercarriage is estimated at 80%. Live heel. Boom is tight. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | T250B | 2011 |
$155,000
|
|
Tigercat X822D HavesterTigercat X822D Havester. This machine has an updated computer system and works as it should. |
Tigercat | X822D | 2011 |
$475,000
|
|
Tigercat 635D Bogie Skidder ***SOLD***2011 Tigercat 635D Bogie Skidder. Hour meter reads 11,000 hours. Cummins 6.7 260 HP engine starts and runs good. Hydrostatic transmission shifts well. 30.5x32 tires in the front, 26 tires in the rear. Tires are estimated at 80% & include a set of tracks. Bogies are in good working order. Cab has heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD*** |
Tigercat | 635D | 2011 |
$Call for Price
|
|
Tigercat 822C Feller Buncher with 5400 Head2011 Tigercat 822C Feller Buncher with 5400 Head. Hour meter reads 12,412 hours. Cummins engine. 24" double grouser pads, undercarriage is estimated at 90%, less than 500 hours on tracks, 1,400 hours on rollers. Hydraulic pump and drive motors have 1,250 hours. Swing gear was done at 12,170 hours. Boom is tight, hoses are dry. Espar preheat and high rotation wrist. Tigercat 5400 felling head, disc & teeth are in good condition. Fire suppression system & fuel heater. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Tigercat | 822C with 5400 | 2011 |
$190,000
|
|
Roto Chopper B66 Chipper ***SOLD***2011 Roto Chopper B66 Chipper. This chipper has 300 hours on a complete factory recondition, new engine, C16 CAT 785 HP, runs and starts good. New drive pumps and belts. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Rotochopper | B66 | 2011 |
$Call for Price
|
|
Rayco RG1220 Brush Chipper2011 Rayco RG1220 Brush Chipper. Hour meter reads 225 hours. Kubota 66.8 HP engine starts and runs good. Pre-emission engine. 12" chipping capacity with a 12"x20" in-feed opening. Intake rate of 100 fpm. Discharge swivels 360° and at a discharge height of 112". Feed wheel lift and crush handles on both sides. New battery. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rayco | RG1220 | 2011 |
$38,500
|
|
Prentice 2570 Feller Buncher ***SOLD***2011 Prentice 2570 Feller Buncher. Hour meter reads 6,500 hours. Cummins 5.9 engine. 28Lx26 tires are estimated at 85%, 28L-26 & 23.1x26 Duals. 2 sets of 28L-26 chains. Pumps are in good condition, new injection pump, tight center pins & bushings. SH56 head in good working order. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Prentice | 2570 | 2011 |
$Call for Price
|
|
Ponsse Wisent Forwarder2011 Ponsse Wisent 6 Wheeled Forwarder. Hour meter reads 15,581 hours. Mercedes engine. 700/55-34 tires on the front are estimated at 75%. 710/45-26.5 tires on the rear are estimated at 80%. Can include double diamond chains at 90% and Clark tracks at 60% for an additional $5,000. K70+S crane is tight. Center was just re-pinned and is tight. New bucket installed in 2021. New clutch plate. Heated and leveling seat. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Wisent | 2011 |
$136,500
|
|
Ponsse Fox 8 Wheel Harvester with a H6 Head ***SOLD***2011 Ponsse Fox 8 Wheel Harvester with a H6 Head. Hour meter reads 14,000 hours. Mercedes Benz engine starts & runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. H6 head is in good working order. 700 tires at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Ponsse | Fox | 2011 |
$Call for Price
|