Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
1998 Valmet 646 ForwarderVALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM FRT TIRES 28L-26 REAR 700/50-26.5 |
Valmet | 646 | 1998 |
$67,900
|
|
Tree Farmer C7F Skidder1998 Tree Farmer C7F Grapple Skidder with Winch. Skidder is a 1998 but had a full factory rebuild in 2002. Hour meter reads 7,132 hours. Cummins 5.9 engine starts and runs good. 30.5x32 tires estimated at 30%. Set of ring chains included that are estimated at 50%. Esco grapple. Winch is strong and in good working order. Blade is in good condition. Straight machine that's woods ready. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Tree Farmer | C7F | 1998 |
$27,500
|
|
Timberjack 460 Skidder1998 Timberjack 460 Grapple Skidder with Winch. Cummins 5.9 engine starts and runs good. New injectors, windows, and rebuilt transmission. 28Lx26 tires are estimated at 85%. Arch pins and center pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timberjack | 460 | 1998 |
$29,500
|
|
Timberjack 608 Feller Buncher with 22" Felling Head1998 Timberjack 608 Feller Buncher with 22" Felling Head. Hours are unknown. Cummins engine starts and runs good. 24" single grouser pads, undercarriage estimated at 50%. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Timberjack | 608 | 1998 |
$25,000
|
|
Timbco 425D Feller Buncher1998 Timbco 425D Feller Buncher with a Quadco 22" Saw Head. This machine has been rebuilt, runs and starts good, 2 new final drives, undercarriage was gone through 3,500 hours ago, tight boom, strong hydraulics, head in good working condition, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timbco | 425D | 1998 |
$90,000
|
|
Timbco 415C Harvester with a Ponsse H73 Processing Head1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$47,500
|
|
Timbco 415C Harvester with a Ponsse H73 Head1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$52,500
|
|
Timbco T415C Harvester with Ponsse H73 ***SOLD***1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timbco | T415-C | 1998 |
$Call for Price
|
|
Tigercat 845B Feller Buncher w/ith a Koehning 22" ***SOLD***1998 Tigercat 845B Feller Buncher with a Koehning 22" Head. Hour meter reads 14,130 hours. Cummins 8.3 engine starts and runs good. 28" double grouser pads, undercarriage is estimated at 75%. Boom is tight. Finals have just been resealed. One of the hydraulic pumps has been recently replaced. Koehring head has a newer disc with good teeth. Cuts 22". Cab has heat, A/C. All manuals included. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Tigercat | 845B | 1998 |
$Call for Price
|
|
Prentice 310E Truck Mount Log Loader1998 Prentice 310E Truck Mount Log Loader. Hour meter reads 8,970 hours. Cummins 5.9 engine starts and runs good. Good swing bearing, strong hydraulics, tight boom with a Finnish grapple. Truck is not road legal, great for yard work, runs and drives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Prentice | 310E | 1998 |
$31,500
|
|
Ponsse Buffalo Forwarder ***ON HOLD***1998 Ponsse Buffalo S16 Forwarder. This machine has a new CAT 3116 engine, runs and starts good, Wabasto heat system, strong hydraulics, cylinders are all in good working order. New center section, tight K75 boom, newer grapple, bogies are all in good working condition, 700 tires, tracks and chains, heat, A/C, and lights. Well Maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Buffalo | 1998 |
$114,500
|
|
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Cobra HS10 | 1998 |
$38,500
|