Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 1470D Processor with Waratah H290 Head

John Deere 1470D Processor with Waratah H290 Head

2008 John Deere 1470D Processor with Waratah H290 Head. Hour meter reads 10,151 hours, John Deere 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, drive system is in good working order, tight CH885 squirt boom, head has good feed rollers and grab arms, computer and measuring system are in good working condition, bogies and axles up to par, tight center section, 700 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470D 2008
$185,000
John Deere 1270D Processor ***SOLD***

John Deere 1270D Processor ***SOLD***

2002 John Deere 1270D Processor. Owner stated that this processor has 9,600 hours, 8.2L John Deere engine, runs and starts good, has been well maintained, Timberjack 762C processing head in good working order, strong hydraulics, tight pins and bushings center and boom, tires are @ 85%, tracks and chains in very good condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD***

John Deere 1270D 2002
$100,000
John Deere 2054 Processor  ***SOLD***

John Deere 2054 Processor ***SOLD***

2006 John Deere 2054 Processor with Waratah HTH 616 Head. This machine has a 6068T Teir II engine, runs and starts good, has been well maintained, undercarriage is in good working condition, tight boom, Waratah HTH 616 head is tight, strong hydraulics, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

John Deere 2054 2006
$107,500
John Deere 120 Processor ***SOLD***

John Deere 120 Processor ***SOLD***

2002 John Deere 120 Processor with a Fabtek 4 Roller Head. This machine has a newer engine and pumps, undercarriage is in good working condition, head is in good working order and has been reinforced at weak points, strong hydraulics and cylinders, Espar pre heater, fire suppression system, 18,000 frame hours, A/C, heat and gauges all work. Spare parts & undercarriage go with machine for an additional $5,000.00. ($61,500) Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 120 2002
$56,500
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
John Deere 653G Processor ***SOLD***

John Deere 653G Processor ***SOLD***

2000 John Deere 653G Processor with 4 Roller Head. This machine has 19,000 hours, engine has been rebuilt, planetaries have been gone through, feed rollers and grab arms have been welded, undercarriage is in good working order, tight boom, strong hydraulics, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2000
$42,900
2008 John Deere 1270D Harvester

2008 John Deere 1270D Harvester

2008 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE HYDRASTATIC DRIVE 480C HEAD 600 RUBBER

John Deere 1270D 2008
$210,000
John Deere 803MH Processor with a Waratah 623C Head

John Deere 803MH Processor with a Waratah 623C Head

2015 John Deere 803MH Processor with a Waratah 623C Head. This machine starts & runs good, 4,603 hours on meter, engine and hydraulic pre-heater, cooler debris guard, 5 year JD Link telematics, 30" double grouser pads with slides, undercarriage is @ 50%. Lap seat belt & air ride, standard counterweight, LED work lights, 6.13M boom, premium radio, rear pull down shade, & toolbox. Waratah 632C Head has auto tensioning, 3/4 chain, tilt and 360 rotation. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 803MH 2015
$335,000
John Deere 703JH Processor w/ Waratah 622B Processing Head

John Deere 703JH Processor w/ Waratah 622B Processing Head

2012 John Deere 703JH with a Waratah 622B Processor. Hour meter reads 9,000 hours, runs and starts good, strong hydraulics, no leaks, undercarriage is @ 70%, 24" pads, double grouser, Timber rite measuring system, tight boom, head is in good working order, Espar pre-heater, heat, A/C, and new LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***Seller is open to reasonable offers.***

John Deere 703JH 2012
$149,900
John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

2000 John Deere 653E Processor with a 2000 Fabtek 4 Roller Head. This equipment has a new main pump, pilot pump, complete valve bank rebuild on both valve banks, new screens in hydraulic tank, new compensator spools in valves, lots of new hoses. Complete fully working spare head, and 8 extra complete valves, extra counters for measuring wheel, heat, A/C, pro heat system. Lights all around, rotary manifold rebuilt 500 hours ago, and new final drive 1,000 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 653E 2000
$88,500
John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

2013 John Deere 703JH Harvester with a Waratah HTH622B Head. Hour meter reads ~5,100 hours, Pro Heat system, TimberRite measuring system. This machine is extremely clean and dry. No welding evident on the machine or the head. All panels open as they should. The machine is very tight and clean all around including the 622 head. Undercarriage is @ 75% 24" double grouser pads, tight controls, heat, A/C, and lights. Additional pictures available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information or to set up a viewing of the machine. Machine is located in Northcentral USA. ***SOLD***

John Deere 703JH 2013
$259,000
John Deere 490D Processor with Fabtek Head ***SOLD***

John Deere 490D Processor with Fabtek Head ***SOLD***

1988 John Deere 490D Processor with a Fabtek Head. This equipment runs and starts good, strong hydraulics, few minor leaks, 24' pads, roller, sprocket, and chains are all in good order, new main pin and bushings, head is in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. ***SOLD***

John Deere 490D 1988
$38,500