Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
CAT 515 Skidder ***SOLD***

CAT 515 Skidder ***SOLD***

1998 CAT 515 Grapple Skidder with Winch. Hour meter reads 9,500 hours. CAT 3304 engine starts and runs good. 28Lx26 tires are estimated at 90%. Includes double diamond chains all around. Winch is in good working order. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

CAT 515 1998
$Call for Price
Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***

Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***

1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Eco Log 550B 1998
$22,500
Hydro-Ax 511EX with 20" Koehring Felling Head ***SOLD***

Hydro-Ax 511EX with 20" Koehring Felling Head ***SOLD***

1998 Hydro-Ax 511EX with 20" Koehring Felling Head. Cummins 5.9L engine starts and runs good. 28Lx26 tires are estimated at 75%, includes 2 sets of chains. Center pins are tight. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Hydro-Ax 511EX 1998
$Call for Price
1998 Hyundai 200 Processor with Fabtek Dangle Head

1998 Hyundai 200 Processor with Fabtek Dangle Head

Great running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner

Hyundai Hyundai 200 High Walker 1998
$Call for Price
John Deere 540G Skidder

John Deere 540G Skidder

1998 John Deere 540G Cable Skidder. This skidder has been well maintained, runs and starts good, strong hydraulics and cylinders, PowerShift transmission, strong winch with newer cable, tight center section, 23.1 x 26 tires @ 50% with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 540G 1998
$54,500
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$39,500
John Deere 748GII Skidder

John Deere 748GII Skidder

1998-99 John Deere 748GII Dual Arch Grapple Skidder. This equipment has a Cummins 8.3 engine, runs and starts good, Power Shift transmission in good working condition, tight center, little play in arch pins, strong hydraulics and cylinders with few minor leaks, 35.5 tires @ 50% with dual rims. Trail blade with tilt. Heat and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GII 1998
$39,500
John Deere 270 with Keto 525 Processing Head

John Deere 270 with Keto 525 Processing Head

1998 John Deere 270 with Keto 525 Processing Head. Hour meter reads 8,500 hours. John Deere 6068H engine starts and runs good. 32" pads, undercarriage is in good working order. Yard bucket with original teeth is included. Keto 525 processing head works as it should. It's a track-drive head, has 3,000 hours. This is a one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

John Deere 270 1998
$162,500
John Deere 843G Feller Buncher

John Deere 843G Feller Buncher

1998 John Deere 843G Feller Buncher. Less than 500 hours on rebuilt engine. 24.5-32 tires are estimated at 40, includes chains that are estimated at 40%. Fresh service, new hoses, & new teeth on the head. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 843G 1998
$29,000
Komatsu PC200 Delimber with a Risley 2000B Limit

Komatsu PC200 Delimber with a Risley 2000B Limit

1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 1998
$50,000
Komatsu PC200 with Limmit 2000B Delimber

Komatsu PC200 with Limmit 2000B Delimber

1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Komatsu PC200 1998
$84,500
Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher

Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher

1998 Lemco XLT 185 Self Propelled Log Loader with 60" Lemco Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, all valve banks have been resealed, Sta-Lite self propelled carrier is in good working order, 60" Lemco slasher, straight blade, good teeth, tight boom and grapple, live heal, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Lemco XLT 185 1998
$36,500