Sort By:   GridGallery
Photo Title
Make Model Year Price
Parting Out 2006 Valmet 911.3 Harvester

Parting Out 2006 Valmet 911.3 Harvester

Parting out this running 2006 Valmet 911.3 Harvester. Sisu engine. Tires are 600mm. We also have parts from the following Valmet Harvesters/Forwarders: 544H , 544X , 546H , 646 , 840 , 840.3 , 901C , 911C & 860. Call for more details!

Valmet 911.3 2006
$Call for Price
1998 Hyundai 200 Processor with Fabtek Dangle Head

1998 Hyundai 200 Processor with Fabtek Dangle Head

Great running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner

Hyundai Hyundai 200 High Walker 1998
$Call for Price
CAT 501HD Processor with Fabtek 4 Roller Head

CAT 501HD Processor with Fabtek 4 Roller Head

2012 CAT 501HD Processor with Fabtek 4 Roller Head. This machine has 3,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working condition, tight boom and head, new wiring harness, grease system for bar saw, heat, A/C has been updated by CAT. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 501HD 2012
$Call for Price
Fabtek Harvester & Forwarder Parts.

Fabtek Harvester & Forwarder Parts.

We have used parts for these following salvage/dismantled Fabtek machines: 133 , 153 , 344B , 346B , 548B , 546C , 548C & 663. Please call for more information!

- - Unknown
$Call for Price
2006 Ponsse Ergo (Parts)

2006 Ponsse Ergo (Parts)

Parting out this 2006 Ponsse Ergo... H73 head...Mercedes 6 cylinder engine...700mm & 710mm tires. Also have parts for 2003 , 2004 Ergo , 1997 Ergo HS16 , 1999 HS10 Cobra & 2003 Carbou forwarder. For more info please give us a call!

Ponsse Ergo 2006
$Call for Price
Ponsse HS16 Processor with a H73 Head ***SOLD***

Ponsse HS16 Processor with a H73 Head ***SOLD***

1998 Ponsse HS16 Processor with a H73 Head. This machine has a CAT 3116 engine, runs and starts good, has been reworked, 1,300 hours on rebuilt transmission, new drive pumps, strong hydraulics, and cylinders. Tight center section, bogies are in good order, brake bands and seals all NEW. Newer front differential. 600 tires with chains, heat, A/C, and lights. H73 head, new center feed roller, others are in good working condition, strong grab arms and cylinders, measuring system is in good order. Also comes with H53 head, Ponsse just installed new feed motor, saw bearing and saw motor seal and sprocket on this head. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse HS16 1998
$Call for Price
HSM 405 H2 Steep Slope Harvester

HSM 405 H2 Steep Slope Harvester

2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

HSM 405 H2 2013
$Call for Price
Ponsse Ergo Harvester with a H73E Head

Ponsse Ergo Harvester with a H73E Head

2006 Ponsse Ergo Harvester with a H73E Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, cylinders and valve banks are in good working order. Tight boom and base, squirt boom is in good condition, bogie and axles are in working order. H73E and measuring system are in good condition. 710 rear tires @ 50%. Heat, A/C, and new lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

- - Unknown
$Call for Price
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$Call for Price
Timbco 415 Processor with a Rolly Head

Timbco 415 Processor with a Rolly Head

2000 Timbco 415 Processor with a Rolly Head. This processor has a Cummins 6 cylinder engine. New engine and pumps. Head is in good working order, Woodland computer system, strong hydraulics and cylinders, tight boom, heat, A/C, and lights. Spare head almost complete. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415 2000
$Call for Price
Valmet 415 FX  2009

Valmet 415 FX 2009

2009 Valmet 415 FX w/ Rolly II heads, Woodland Computer Systems, Cummins 6.7 Power

Valmet - 2009
$Call for Price
Ponsse Ergo 8 Wheel Harvester ***SOLD***

Ponsse Ergo 8 Wheel Harvester ***SOLD***

2013 Ponsse Ergo 8 Wheel Harvester with a H7 Head. Hour meter reads 8,150 hours, Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, crane and squirt boom are in good working order. 700 tires, H7 head and measuring system are in good working condition, tight pins and bushings, good glass. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2013
$Call for Price