Sort By:   GridGallery
Photo Title
Make Model Year Price
Lemco 72" Saw Table ***SOLD***

Lemco 72" Saw Table ***SOLD***

1998 72" Lemco Saw Table in good working condition. Will need a couple of hoses changed. Used sparingly for tree length and in good condition for age. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 72 1998
$Call for Price
Lemco 2500 Series Log Loader with a Lemco 60" Slasher

Lemco 2500 Series Log Loader with a Lemco 60" Slasher

1992 Lemco 2500 Series Truck Mounted Log Loader with a Lemco 60" Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, live heal, 4 out riggers. Slasher has a straight blade, good teeth, butt board. Truck runs good, has decent tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Lemco 2500 1992
$29,500
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Mack - 1976
$26,500
Prentice 210D Loader with Adjustable Buck Saw

Prentice 210D Loader with Adjustable Buck Saw

1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 210D 1984
$18,500
International Truck w/Prentice 180D & 60" Siiro Slasher

International Truck w/Prentice 180D & 60" Siiro Slasher

1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Siiro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice - Unknown
$22,900
Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900. ***SOLD***

Prentice 384 2006
$Call for Price
FORD 8000 with Prentice 210C and Siiro 60" Slasher

FORD 8000 with Prentice 210C and Siiro 60" Slasher

Prentice 210C Mounted on a 1980 FORD 8000 Truck with a Siiro 60" Slasher. Hour meter reads 10,639 hours. CAT 3208, yard truck. Cummins 6BT in the loader. Lever controls, swing bearing and boom are tight, dead heel. Siiro 60" slasher has minimal welding, disk & teeth are good, bangboard has a crack that could be welded. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice 210C Unknown
$16,500
GMC General with Prentice 110 Loader

GMC General with Prentice 110 Loader

1986 GMC General with Prentice 110 Loader. Cummins 400hp engine, 13 speed manual transmission. All new 11R22.5 tires. Prentice 110 loader is strong, has a little slack. Butt bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice 110 Unknown
$11,000
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D -
$17,500
Serco 300 Self-Propelled Loader and  Hanfab 72" ***SOLD***

Serco 300 Self-Propelled Loader and Hanfab 72" ***SOLD***

2012 Serco 300 Self-Propelled Loader and 2001 Hanfab 72" Slasher. Hour meter reads 14,856 hours. 4,500 hours on newer engine, newer injectors with 1,000 hours. Front & rear ends were replaced in the last year. New webasto preheat system. Brakes and lights on the carrier are in good working order. 2001 Hanfab 72" Slasher has been gone through, no cracks or welds. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Serco 300 2012
$Call for Price
Serco 170B Self-Propelled Loader w/ 60" Siiro Slasher

Serco 170B Self-Propelled Loader w/ 60" Siiro Slasher

2005 Serco 170B Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 14,000 hours. John Deere engine. Boom and bucket are tight. 6x6 self-propelled carrier. Siiro 60" slasher has new teeth. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 170B 2005
$Call for Price
Serco 170A Loader with 60" Slasher

Serco 170A Loader with 60" Slasher

2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 170A 2001
$39,500