Featured in Slasher/Loader

Sort By:   GridGallery
Photo Title
Make Model Year Price
Serco 300 Self-Propelled Loader and  Hanfab 72" ***SOLD***

Serco 300 Self-Propelled Loader and Hanfab 72" ***SOLD***

2012 Serco 300 Self-Propelled Loader and 2001 Hanfab 72" Slasher. Hour meter reads 14,856 hours. 4,500 hours on newer engine, newer injectors with 1,000 hours. Front & rear ends were replaced in the last year. New webasto preheat system. Brakes and lights on the carrier are in good working order. 2001 Hanfab 72" Slasher has been gone through, no cracks or welds. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Serco 300 2012
$Call for Price
Hood S182 Loader with Hood Slasher ***SOLD***

Hood S182 Loader with Hood Slasher ***SOLD***

1995 Hood S182 Loader with Hood Slasher. Hour meter reads 4,063 hours. John Deere 6068T engine starts and runs good. Lever controls with heat & A/C. Dead heel, bypass bucket, tight boom. Hood slasher has butt plate, straight blade, and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S182 1995
$Call for Price
Lemco 72" Saw Table ***SOLD***

Lemco 72" Saw Table ***SOLD***

1998 72" Lemco Saw Table in good working condition. Will need a couple of hoses changed. Used sparingly for tree length and in good condition for age. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 72 1998
$Call for Price
Serco 170B Self-Propelled Loader w/ 60" Siiro Slasher

Serco 170B Self-Propelled Loader w/ 60" Siiro Slasher

2005 Serco 170B Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 14,000 hours. John Deere engine. Boom and bucket are tight. 6x6 self-propelled carrier. Siiro 60" slasher has new teeth. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 170B 2005
$Call for Price
CAT 559C Loader with CTR Delimber & Bucksaw ***SOLD***

CAT 559C Loader with CTR Delimber & Bucksaw ***SOLD***

2013 CAT 559C Loader with CTR Delimber & Bucksaw. Hour meter reads 18,294 hours. One owner loader. Dead heel. Hydraulic landing gear on carrier is in good working order, good tires. Tight boom and bucket. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

CAT 559C 2013
$Call for Price
Hood S182 Loader ***SOLD***

Hood S182 Loader ***SOLD***

1985 Hood S182 Loader on a 6x6 Truck with a Siiro 60" Slasher. This loader has a Deutz 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, has a few hydraulic leaks, lever control, boom has been repinned. 1/3 cord bypass bucket, live heel, loader has heat but no A/C. Truck has a Cummins 8.3 engine, runs and starts good, 6,500 miles on odometer, Allison automatic transmission, front mounted winch. Siiro 60" slasher with butt plate, blade is straight but may need a few teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S182 1985
$Call for Price
Hood S-182 Self Propelled Loader w/ Hood 60" ***SOLD***

Hood S-182 Self Propelled Loader w/ Hood 60" ***SOLD***

1985 Hood S-182 Self Propelled Loader with a Hood 60" Pull Behind Slasher. This equipment runs and starts good, strong hydraulics and cylinder, decent boom and 1/3 cord Bypass grapple, dead heal. Lever controls. Carrier and drive system are in working order. Slasher has a straight blade and decent teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S-182 1985
$Call for Price
Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900. ***SOLD***

Prentice 384 2006
$Call for Price
International with Rotobec Loader ***SOLD***

International with Rotobec Loader ***SOLD***

1979 International with Rotobec Loader and Siiro Slasher. CAT 3802 engine starts was recently rebuilt. 15,000 miles, 1,200 hours since the overhaul. New input bearing, pump drive, & suction lines. Rotobec continuous grapple, dead heel, & lever controls. Siiro slasher saw motor has been rebuilt, includes an extra pump, new saw blade, two boxes of teeth, hydraulic cylinders, stroke slasher, and another complete saw ring. Also includes another tube, full chassis, bangboard, and extra knives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

International Siiro 1979
$Call for Price
Hood S-182 Loader with Hood 60" Slasher ***SOLD***

Hood S-182 Loader with Hood 60" Slasher ***SOLD***

2012 Hood S-182 Loader Mounted on a 2002 Western Star with a 2014 Hood 60" Slasher. Hour meter reads 9,232 hours. John Deere 6068 engine. 30' boom with live heel. Loader is tight, landing gear in good working order. 2014 Hood 60" Slasher, good blade and teeth. Includes 3 extra blades. 2002 Western Star 5800, odometer reads 578,831 miles. CAT C12 engine, 13 speed transmission. Heat, A/C, lights, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S-182 2012
$Call for Price
60" Slasher Saw

60" Slasher Saw

60" Slasher. In good working order. This equipment has a straight blade, good teeth, & solid frame. Strong hydraulics and pump, good tires, pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

- 60" -
$7,000
Siiro 60" Adjustable Slasher Table ***ON HOLD***

Siiro 60" Adjustable Slasher Table ***ON HOLD***

1993 Siiro 60" Adjustable Slasher Table. This equipment is set up to cut 8' and 16' logs, newer saw motor 1,000 hours ago, strong hydraulics, straight disc could use a few teeth, solid frame, decent tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

Siiro 60 1993
$7,500