Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester with a C-4 Crane and H-7 Head

Ponsse Ergo Harvester with a C-4 Crane and H-7 Head

2006 Ponsse Ergo Harvester with a C-4 Crane and H-7 Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive, tight boom and head, resealed pumps, boom chains, feed motors, updated delimbing knives, updated roll arms, most cylinders replaced, Taimi live swivels, LED lights, bogies and axles are in good order, pre-heat system, computer and measuring system, 710 tires, tracks like new @ 90%, heat, A/C, and lights. Regular service and oil changes. Seller is open to reasonable offers and trades. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$92,500
John Deere 1270D Harvester with 480 Head

John Deere 1270D Harvester with 480 Head

2006 John Deere 1270D Harvester with 480 Head. Hour meter reads 17,000 hours, runs and starts good, strong hydraulics and cylinders. Pre heater, decent center section, squirt boom works as it should, joysticks in good order, cab rotation and leveling needs a censor. Bogies in good working order. Auto lube, pre heater. 710 tires with tracks. Fire suppression system needs a charge.480 has some ware and welds but in good working order. Heat, A/C may need to be charged, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1270D 2006
$65,000
Timberjack 1270D Harvester with a 758HD Head

Timberjack 1270D Harvester with a 758HD Head

2006 Timberjack 1270D Harvester with a 758HD Head. This machine runs and starts good, new injection pump, new water pump, strong hydraulics and hydrostatics. New pumps - main and work pump. Tight boom, new king post and bearings. 758HD head in good working order. Timbermatic 300 measuring system, recent new computer with updated software. Fresh oil service all around - synthetic oil. Espar pre-heat system. 5 of 6 tires are @ 50%, 1 tire is @ 30%, one set of tracks. Rotating and tilting cab, works excellent. New computer and wiring harness installed recently. Also has a lot of parts for the head, knives, feed wheel, arms, motors, 2 HHMs, saw motor. Large selection of spare parts, engine, differential, pump and hydraulic motor, coolers, all the modules, joy sticks, cylinders, etc. Has a extra parts from a dismantled machine. Spare John Deere 6081 engine with 13,000 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Timberjack 1270D 2006
$75,000
2006 Tigercat H822 Harvester

2006 Tigercat H822 Harvester

2006 TigerCat H822 with Risley Rolly intermittent saw bottom. NEW undercarriage, 15,000 HRS CALL TODAY for Price

Tigercat - 2006
$150,000
John Deere 1270D Harvester with a 758HD Head ***SOLD***

John Deere 1270D Harvester with a 758HD Head ***SOLD***

2006 John Deere 1270D Harvester with a 758HD Head. This machine has a John Deere 6090 engine, runs and starts good, 6,300 hours on head, ~7,000 on carrier. Pre-heat system, strong hydraulics, tight boom, head is in good working order, newer computer, bogies and axles are in good condition, tight center section, original paint, heat, A/C, and lights. One set of near new bogie tracks with the machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 1270D 2006
$124,900
Timberking TK721 Processor w/ Logmax 7000 Head ***SOLD***

Timberking TK721 Processor w/ Logmax 7000 Head ***SOLD***

2006 Timberking TK721 Processor with a Logmax 7000 Head. Hour meter reads 7,500 hours on a CAT engine, 20,000 frame hours, runs and starts good, strong hydraulics and cylinders, tight boom, Logmax 7000 head in good working order, undercarriage is @ 60%, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machines is located in Canada. ***SOLD***

Timberking TK721 2006
$85,900
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Timberking TK711HD Processor

Timberking TK711HD Processor

2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK711HD 2006
$94,900
Timberking 701HD Harvester

Timberking 701HD Harvester

2006 Timberking 701HD Harvester with Fabtek 4 Roller Head. This machine has many recent updates including complete new undercarriage with less than 300 hours, new feed wheel chain and sprockets, new engine and hydraulic pump with less than 200 hours. 13,500 total machine hours, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $128,900.00***

Timberking 701HD 2006
$124,900
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2006 Ponsse Ergo Harvester with 15,000 hours. Machine runs and starts good and is equipped with the H73E head in great working condition. Good rubber, tracks, and chains go with machine, heat, A/C, radio, and all gauges work. Machines working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$165,000
John Deere 2054 Processor  ***SOLD***

John Deere 2054 Processor ***SOLD***

2006 John Deere 2054 Processor with Waratah HTH 616 Head. This machine has a 6068T Teir II engine, runs and starts good, has been well maintained, undercarriage is in good working condition, tight boom, Waratah HTH 616 head is tight, strong hydraulics, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

John Deere 2054 2006
$107,500