Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
Fabtek 133 Harvester with a Fabtek 4 Roller Head

Fabtek 133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek 133 Harvester with a Fabtek 4 Roller Head. This equipment has a John Deere engine, runs and starts good, Proheat system. New hydraulic pump, strong cylinders, tight boom and head, new Woodland computer system, grab arms and feed rollers are in good working order. Undercarriage is @ 75%, 24" double pads. Heat, a/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA

Fabtek 133 2000
$66,500
John Deere 120 Harvester with a Fabtek 4 Roller Head

John Deere 120 Harvester with a Fabtek 4 Roller Head

2000 John Deere 120 Harvester with a Fabtek 4 Roller Head. This machine has a 4 cyl. John Deere engine, runs and starts good, rebuilt swing gear with John Deere replacement bushings, solid boom, strong hydraulics - few minor leaks, drive motors and pumps are in working condition. DASA measuring system works, undercarriage is @ 50%, 24" triple grouser pads, forestry package. Head has new chains, feed rollers are decent, knives are in good order - may need sharping. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 120 2000
$29,900
John Deere 653G Harvester

John Deere 653G Harvester

2000 John Deere 653G Harvester with a 4 Roller Head. Hour meter reads 17,100 hours, John Deere 6068 engine, runs and starts good, decent feed rollers and grab arms, has a few leaks, strong hydraulics and drive system, just went through the tilt cylinders, undercarriage is in good working order, tight boom, measuring system works as it should, head has a little play. Heat, A/C needs a charge, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

John Deere 653G 2000
$Call for Price
Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek FT-133 2000
$Call for Price
Fabtek FT 133 Harvester ***SOLD***

Fabtek FT 133 Harvester ***SOLD***

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, strong hydraulics and drive system, undercarriage is @ 50%, tight boom. Fabtek 4 roller head is in good working order, heat, A/C, and lights. Also has extra used parts: Hydraulic pump, 2 roller motors, 2 top spindles, rollers, few rams, 2 Dallas chips, 2 new buttons for joy sticks, new solenoid for valve bank, saw motor, saw box, top knives and other misc. items. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Fabtek FT133 2000
$53,900
Valmet 911C Harvester with 965 Head

Valmet 911C Harvester with 965 Head

2000 Valmet 911C Harvester with 965 Head. This machine has a Cummins 6BTA engine, runs and starts good, strong hydraulics, decent cylinders few leaks, boom has some play, may need a little attention, center has a little play, head cuts and works - computer monitor is broken, decent bogies and axles, 600 tires @ 50% with tracks available, 28Lx26 tires in rear. Will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 911C 2000
$22,500
Timbco 415 Processor with a Rolly Head

Timbco 415 Processor with a Rolly Head

2000 Timbco 415 Processor with a Rolly Head. This processor has a Cummins 6 cylinder engine. New engine and pumps. Head is in good working order, Woodland computer system, strong hydraulics and cylinders, tight boom, heat, A/C, and lights. Spare head almost complete. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415 2000
$Call for Price
Timbco T415-D Processor with a Rolly Head

Timbco T415-D Processor with a Rolly Head

2000 Timbco T415-D Processor with a Rolly Head. This equipment has ~12,000 hours, Cummins engine, runs and starts good, strong hydraulics and cylinder, new hoses, undercarriage is @ 75%, double grouser pads, sprockets are in good order, tight boom. Rolly head and measuring system are all in good condition, new Pro Clean roller motor, heat, lights, and A/C - was just gone through. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timbco T415-D 2000
$105,500
John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

2000 John Deere 653E Processor with a 2000 Fabtek 4 Roller Head. This equipment has a new main pump, pilot pump, complete valve bank rebuild on both valve banks, new screens in hydraulic tank, new compensator spools in valves, lots of new hoses. Complete fully working spare head, and 8 extra complete valves, extra counters for measuring wheel, heat, A/C, pro heat system. Lights all around, rotary manifold rebuilt 500 hours ago, and new final drive 1,000 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 653E 2000
$88,500
John Deere 653G Processor ***SOLD***

John Deere 653G Processor ***SOLD***

2000 John Deere 653G Processor with 4 Roller Head. This machine has 19,000 hours, engine has been rebuilt, planetaries have been gone through, feed rollers and grab arms have been welded, undercarriage is in good working order, tight boom, strong hydraulics, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2000
$42,900
Timbco T415-D Harvester

Timbco T415-D Harvester

2000 Timbco T415-D Harvester with a 2005 Fabtek 4 Roller Head. This harvester has a rebuilt engine and pumps, newer oil cooler, has updated planetary also has a spare, spare drive motor, tight boom and head, strong hydraulics, undercarriage is @ 70%, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco T415-D 2000
$110,000