Harvesters/Processors For Sale
Featured in Harvesters/Processors
| Photo |
Title
|
Make | Model | Year | Price |
|
John Deere 2154D with Waratah 622B Harvesting Head2009 John Deere 2154D with Waratah 622B Harvesting Head. Engine and main pump have around 1,000 hours. 24" double grouser pads, undercarriage may need some attention, good pads and rollers but may need a chain soon. Tight boom that could use a few hoses replaced. Head has good feed rollers and grab arms. Logrite measuring system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
John Deere | 2154D | 2009 |
$60,000
|
|
Ponsse Ergo with H7 Harvesting Head2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo with H7 Head | 2004 |
$198,500
|
|
2011 Timberpro TN725BMachine has 6800 Hrs. with an Updated computer system. |
Timberpro | TN725B | 2011 |
$Call for Price
|
|
Tigercat X822D HavesterTigercat X822D Havester. This machine has an updated computer system and works as it should. |
Tigercat | X822D | 2011 |
$475,000
|
|
Komatsu XT430-5 with Log Max 7000XT Fixed Processing Head2020 Komatsu XT430-5 with Log Max 7000XT Fixed Processing Head. Hour meter reads 4,950 hours with a few months of warranty left. Cummins QSL9 engine, 331hp. 24" double grouser pads, undercarriage is estimated at 70%. Boom is tight. Log Max 7000XT fixed head is in good condition and working order. 7-inch LED IQAN-MD4 color touchscreen. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | XT430-5 | 2020 |
$435,000
|
|
Ponsse Ergo Harvester with H8 Harvesting Head2016 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 13,000 hours. Went through the Ponsse Refurb program less than 1,000 hours ago. 710/45-26.5 tires are estimated at 60%, includes tracks that are estimated at 80%. New head pump, drive coupler, exhaust, windows, feed wheel arms, feed wheels, knives, tilt cylinder, & main lift cylinder. Valve banks were also resealed. Owner operator. Webasto preheat system, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Ponsse | Ergo | 2016 |
$258,500
|
|
2008 1270DThis is a very well taken care of machine, and its in great shape for the age. It has 1400 hours on a new Hydraulic pump and alternator, has had new feed roller motor added 20 hours ago, has new batteries as well. The head on this unit is newer and is a 2013 model we do take trades and we can assist with trucking and financing as well Thank you for looking! |
- | - | - |
$69,500
|
|
2007 VALMET 415EX 1263This machine is in good shape, all of the panels guards, doors etc are in nice shape. The head is a Rolly II head on it. It has a DASA computer system installed, has a Webasto Preheater, has a Sisu 6cylinder engine, & a 2 speed transmission with high and Low range. The under carriage is at about 80% with 23.5 Double grouser pads. We do take trades and we can assist with Financing and trucking if needed Thank you for looking |
- | - | - |
$89,500
|
|
CAT 501HD with PF48 4 Roller Processing Head2012 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 7,593 hours. CAT C6.6 engine. 24" double grouser pads, undercarriage is estimated at 70%. Boom is tight, all cylinders have been repacked in the last 400 hours, all hoses are in good condition. PF48 head wtih minimal welding, measuring system is in good working order. 2nd owner machine. Ready to work. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
CAT | 501HD | 2012 |
$152,500
|
|
Ponsse Beaver with Ponsse H6 Harvesting Head2019 Ponsse Beaver with 2024 Ponsse H6 Harvesting Head. Hour meter reads 10,095 hours. C44 crane, H6 harvesting head is brand new with 0 hours. Tires are estimated at 75%. Webasto preheat system, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Beaver | 2019 |
$328,500
|
|
John Deere 490E with Fabtek 4 Roller Processing Head1994 John Deere 490E with Fabtek 4 Roller Processing Head. Hour meter reads 16,788 frame hours, 2,200 hours on engine rebuild, engine starts and runs good. 24" triple grouser pads, undercarriage is estimated at 70%. Rebuilt water pump and rotate motor, new starter. Measuring system is in good working order but the head will need to be rebuilt with new chains. Includes spare Fabtek parts head and an IBC tote with additional parts. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 490E | 1994 |
$13,000
|
|
Ponsse Beaver with H6 Harvesting Head2021 Ponsse Beaver with Ponsse H6 Harvesting Head. Hour meter reads 10,400 hours, 8,500 crane hours, newer engine installed 3,500 hours ago. Tires are estimated at 70%, includes tracks and chains. H6 harvesting head is in good working order. Webasto preheat system, heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Beaver | 2021 |
$282,500
|