Harvesters/Processors For Sale

Featured in Harvesters/Processors

CAT 501HD with PF48 4 Roller Processing Head

$152,500

CAT 501HD with PF-48 Processing Head

$240,000

Ponsse Ergo Harvester with H7 Head

$219,900

TimberPro TN725D with CF-22 Processing Head

$550,000

John Deere 1470E with H290 Processing Head

$131,500

Ponsse Scorpion with H7 Harvesting Head

$575,000

Timberpro TN725B with Rolly II Processing Head

$119,900

Ponsse Ergo 8 Wheeled Processor with 2020 H7 Head

$299,000

CAT 501HD with Fabtek 4 Roller Processing Head

$225,000

John Deere 120 with Fabtek 4 Roller Head

$52,500

Sort By:

Photo	Title	Make	Model	Year	Price
	Ponsse Ergo Harvester with a H73E Head 2006 Ponsse Ergo Harvester with a H73E Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, cylinders and valve banks are in good working order. Tight boom and base, squirt boom is in good condition, bogie and axles are in working order. H73E and measuring system are in good condition. 710 rear tires @ 50%. Heat, A/C, and new lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	-	-	Unknown	$Call for Price
	John Deere 1270E Parts We have a John Deere 1270E that we are parting out. Call Delvin at Cell: +1 715-699-6271 for availability and pricing	-	-	Unknown	$Call for Price
	2015 Komatsu XT430L-2 This machine has a C144 head on it, a Cummins 8.3 engine, has an Auxiliary fuel tank, Cab steps, a full cat walk, and has an Espar preheater installed. The cab is in excellent shape and is very clean, The seat is in excellent shape and it has good paint overall. The air and heat works as it should. We do take trades and we can assist with trucking and financing if needed. Thank you for looking	-	-	Unknown	$249,500
	John Deere 490E with Fabtek 4 Roller *SOLD* John Deere 490E with Fabtek 4 Roller Processing Head. Hour meter reads 19,031 hours. John Deere 4045T engine starts and runs good. 32" triple grouser pads, undercarriage is estimated at 50%. Fabtek 4 Roller Processing Head is in good working order. Heat, A/C, LED light bar. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.*SOLD*	John Deere	Deere	Unknown	$Call for Price
	Ponsse Ergo with H8 Processing Head *ON HOLD* 2023 Ponsse Ergo with H8 Processing Head. Hour meter reads 155 hours. Mercedes Benz OM 926 engine. 710/45-26.5 tires are estimated 95%. Includes two sets of tracks. Webasto preheat system. Ponsse C5 squirt boom. Ponsse H8 processing head is in great condition, measuring system in good working order. Heat, A/C, LED lights, lunch cooler & heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *ON HOLD*	Ponsse	Ergo	2023	$669,500
	2016 TN725C Timberpro This unit has all guards and glass in good shape, as well as the AC is nice and cold. It does have an Eberspacher pre heater in it and it has forward and reverse , Hi-Low Range. and Hydraulic brakes. The under carriage is at roughly 40% and has 23 3/4 " pads. We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!	-	-	2023	$129,500
	2014 Rottne Machine runs and works as should. This harvester has a SP 561 Head.	-	-	2023	$Call for Price
	2014 Komatsu 931.1 This is a machine that is in nice shape for the year and hours, the head is a C144 SN:1144016201 . All guards, covers, doors and steps are in good shape. This machine has a Wabasto pre heater installed. The Sisu engine model number 74ETA . The 2 speed transmission works as it should. Tire sizes are Fronts 710/45-26.5 Rears are size 710/55-34 all tires are at approximately 65%	-	-	2023	$149,500
	Ponsse Ergo with H8 Harvesting Head 2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,615 hours. 710/45-26.5 tires are estimated at 90%. Set of tracks are like new. Active frame, C5 crane, with H8 harvesting head. Lunch heater/cooler and AutoMat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2022	$675,000
	Komatsu XT445L with Log Max 7000XT Processing Head 2022 Komatsu XT445L with Log Max 7000XT Processing Head. 24" single grouser pads, undercarriage is estimated at 90%. Warranty until November of 2024 or 5,000 hours. Komatsu care maintenance until November 2025 or 2,000 hours. Leveling system. Log Max 7000XT processing head is in good condition. Espar preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Komatsu	XT445L	2022	$625,000
	Ponsse Bear Harvester with H8 Head 2022 Ponsse Bear 8W Harvester with H8 Head. Hour meter reads 2,124 hours. 750/55-26.5 tires estimated at 80%, two sets of tracks are included that are in good condition. Webasto preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Bear	2022	$715,000
	Ponsse Ergo with H8 Harvesting Head 2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,225 hours. Mercedes OM 936 Stage V/Tier 4F engine. 710/45-26.5 tires are estimated at 90%, tracks can be included. C44+ crane with an H8 harvesting head. Center and crane are tight. Webasto preheat system. Active Frame. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2022	$675,000