Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester with H7 Harvesting Head

Ponsse Ergo Harvester with H7 Harvesting Head

2005 Ponsse Ergo 6 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 13,491 hours. Refurbished by Ponsse in 2016 & 2022. 710/45-26.5 tires are estimated at 75%. Front tires are estimated at 70%. Includes a set of tracks estimated at 70%. Auto-grease and webasto preheat systems. H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. New head pump. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$173,500
Timbco 425EXL with 2015 Rolly II Processing Head

Timbco 425EXL with 2015 Rolly II Processing Head

2005 Timbco 425EXL with 2015 Rolly II Processing Head. Hour meter reads 9,257 hours. Cummins 8.3L engine was fully rebuilt at 8,900 hours. 24" single grouser pads, newer undercarriage estimated at 90%. 2015 Rolly II processing head is in good condition, measuring system is in working order. Woodland computer system, heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 425 EXL 2005
$166,500

Timberjack 1270D Harvester with a 2012 Waratah H270 Head

2005 Timberjack 1270D Harvester with a 2012 Waratah H270 Head. This equipment has a John Deere 6081 engine, runs and starts good, Espar pre heat. Timbermatic 300 computer in good working order. Strong hydraulics, and cylinders. Tight boom and head, boom base has been reworked, replaced cylinder, extended boom has been redone, 700 tires and tracks, tracks are @ 70%, new front glass, sides are in good shape, cab rotation and level is in good working order. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270D 2005
$159,500
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$99,900
Fabtek FT-153 Processor with 4 Roller Head

Fabtek FT-153 Processor with 4 Roller Head

2005 Fabtek FT-153 Processor with 4 Roller Head. This equipment runs and starts good, John Deere engine, complete over haul 3 months ago, undercarriage track rollers and sprockets updated 1 year ago, 24" triple grouser, main and final drive pumps new this last summer. Head rollers, grab arm, and saw are in good working order, having issues with measuring system, tight main boom, strong cylinders, Pro-Heat new pump, heat, A/C, decent glass. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek FT-153 2005
$90,000
Fabtek 133 with Fabtek 4 Roller Processing Head

Fabtek 133 with Fabtek 4 Roller Processing Head

2005 Fabtek 133 with Fabtek 4 Roller Processing Head. Hour meter reads 18,979 hours, crane hours read 8,635 hours. John Deere 6068 engine. 24" double grouse pads, undercarriage is estimated at 90%. Proheat preheat system. FT18 processing head has good feed wheels, minimal welding, & working measuring system. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek 133 2005
$90,000
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$85,000
Komatsu PC200LC Processor with a Waratah HTH622B Head

Komatsu PC200LC Processor with a Waratah HTH622B Head

2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Komatsu PC200LC 2005
$79,500
Timbco 415EX with Valmet 370E Processing Head

Timbco 415EX with Valmet 370E Processing Head

2005 Timbco 415EX with Valmet 370E Processing Head. Frame hours are unknown, hour meter reads 6,508 hours. Sisu engine starts and runs good. Reversing fan in working order, new alternator. 24" double grouser pads, undercarriage is estimated at 85%. Pins, bushings, and swing bearing are tight. Squirt boom. Valmet 370E processing head is in good working order, one feed wheel motor could be resealed. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 415EX 2005
$57,500
Tigercat 822 with LogMax 7000 Dangle Head

Tigercat 822 with LogMax 7000 Dangle Head

2005 Tigercat 822 with LogMax 7000 Dangle Head. Hour meter reads 32,000 frame hours. Well maintained. 24" single grouser pads, undercarriage is estimated at 80%. LogMax 7000 dangle head is in good condition, measuring system is in working order. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Tigercat 822 2005
$51,500
Timbco 425 EXL Processor with Log Max 6000 Head

Timbco 425 EXL Processor with Log Max 6000 Head

2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 425 EXL 2005
$34,500