Harvesters/Processors For Sale
Photo |
Title
|
Make | Model | Year | Price |
HAHN HSW 110B Self Propelled Harvester ***SOLD***1993 HAHN HSW 110B Self Propelled Harvester. This equipment starts and runs good, no major oil leaks. This machine was rebuilt in 2004 with a new crate JD engine. list of repairs, rebuilt inside long stroke/delimber cylinder, new right top knife cylinder, rebuilt cab tilt cylinder, new alternator, replaced front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Northeast USA. ***SOLD*** |
Hahn | HWS 110B | 1993 |
$45,000
|
|
Ponsse Ergo 6 Wheeled Processor with H73E Head2006 Ponsse Ergo 6 Wheeled Processor with H73E Head. Hour meter reads 28,500 hours. Mercedes engine. Tires are estimated at 50%, carriers are estimated at 65%. New pinion bearing and power divider in 2021. Webasto preheat system. Opti computer system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2006 |
$39,900
|
|
John Deere 690ELC Processor1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
John Deere | 690ELC | 1998 |
$39,500
|
|
Timberjack 1270B Harvester with a 762C Head1999 Timberjack 1270B Harvester with a 762C Head. This unit has an International DT 466 engine, runs and starts good, preheat system, &strong hydraulics and cylinders. Pump and hydrostats are in good working order, joystick controls, one joystick has been recently rebuilt, tight boom, boom base has new bearings. 762C head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass installed recently. 600 tires with tracks and chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 1270B | 1999 |
$39,500
|
|
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Cobra HS10 | 1998 |
$38,500
|
|
Timberjack 2518 Harvester with Bar Saw Head1992 Timberjack 2518 Harvester with Bar Saw Head. Brand new John Deere engine installed. 24" double grouser pads, undercarriage is in good working order. Bar saw felling head has good hoses and works as it should. Leveling cab with heat. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timberjack | 2518 | 1992 |
$35,000
|
|
Valmet 921 with 370E Processing Head2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 921 | 2001 |
$34,900
|
|
Timbco 425 EXL Processor with Log Max 6000 Head2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 425 EXL | 2005 |
$34,500
|
|
Kobelco SK200 Mark IV with Waratah 230HTH Processing Head2000 Kobelco SK200 Mark IV with Waratah 230HTH Processing Head. Hours are unknown. Mitsubishi engine. 24" triple grouser pads, undercarriage is estimated at 40%. Waratah 230HTH processing head is in good working order. Heat, A/C, lights, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Kobelco | SK200 Mark IV | 2000 |
$34,500
|
|
Morbark Wolverine Three Wheel ***ON HOLD***1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Morbark | Wolverine | 1995 |
$28,900
|
|
Ponsse Ergo Processor with H73 Processing Head1998 Ponsse Ergo with H73 Processing Head. Hour meter reads 22,000 hours. CAT engine starts and runs good. 700 tires are estimated at 70%. Tight center, bucket, and boom. Cab leveling doesn't work. Bogies are in good working order. Good turn table. H73 processing head is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 1998 |
$28,500
|
|
Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Eco Log | 550B | 1998 |
$22,500
|