Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 2054 Harvester

John Deere 2054 Harvester

2004 John Deere 2054 Harvester with a Waratah 620B Head. This equipment has 14,500 frame hours. New motor has less than a 1,000 hours. Close to new approx. 95% rails, pads, front idlers, & sprockets. New hydraulic pumps 2,500 hours ago. New final drives 2,500 hours ago, rebuilt center joint 3,500 hours ago. All hydraulic hose and fittings are good. All boom cylinders are good. All controls work good, travel is good. The Waratah 620B head has same hours as machine, cylinders are all good, hydraulic hoses are all good, coupler fitting to boom at top of head is good, head rotate is good. Feed rollers are good, read outs good, 2 saws, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

John Deere 2054 2004
$79,500
Link Belt 210X2 Processor with Southstar QS500 Head

Link Belt 210X2 Processor with Southstar QS500 Head

2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Link Belt 210X2 2013
$198,500
Barko 240 Harvester with a JP Skidmore CF18 Head

Barko 240 Harvester with a JP Skidmore CF18 Head

2014 Barko 240 Harvester with a JP Skidmore CF18 Fixed Harvesting Head. This machine has a Cummins 6.7L - 220 HP engine, hour meter reads 4,900 hours, runs and starts good, Webasto pre heater, strong hydraulics and pumps, hydraulic electric fill pump, vacuum pump, new drive coupler 300 hours ago, D5 size undercarriage with 24" DG pads, undercarriage is @ 65%. JP Skidmore CF18 fixed harvesting head with 360 degree continuous rotation in good working order. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 240 2014
$279,000
Volvo 2421C Processor with a QS500 South Star Head

Volvo 2421C Processor with a QS500 South Star Head

2013 Volvo 2421C Processor with a QS500 South Star Head. This machine has a newer Volvo engine with ~3,000 hours, runs and starts good, Espar heating system, strong hydraulics and cylinders, solid boom, undercarriage is @ 70%, QS500 head and computer are in good working order, tight control, heat, A/C, and lights. A/C will need new compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Volvo 2421C 2013
$239,000
Kobelco 260 Harvester with Logmax 7000XT Head

Kobelco 260 Harvester with Logmax 7000XT Head

2011 Kobelco 260 Harvester with a 2008 Logmax 7000XT Head. This machine runs and starts good, Cummins 6.7L engine, 4,300 hours on machine, 12,000 hours on head - has been gone through, strong hydraulics, tight boom, new Rotobec rotator on head, head has newer feed motor, new saw motor, repacked cylinders, Motomit computer in good order, new chains and sprockets, 24" pads, heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Kobelco 260 2011
$135,900
Timberjack 2618 Processor

Timberjack 2618 Processor

1997 Timberjack 2618 Processor. This machine has 7,429 hours, 8.3L 6CT Cummins motor complete rebuild 457 hours ago, pumps tested and are all within specs, both planetary drives rebuilt, undercarriage is at 30%, sprocket is worn, machine has a 2000 Logmax 750 dangle head, but is still plumed for hot saw, boom pins are tight with no slop, leveling pins have a little play but not bad. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Timberjack 2618 1997
$57,500
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$68,500
HSM 405 H2 Steep Slope Harvester

HSM 405 H2 Steep Slope Harvester

2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

HSM 405 H2 2013
$Call for Price
Timbco 415 Processor with a Rolly Head

Timbco 415 Processor with a Rolly Head

2000 Timbco 415 Processor with a Rolly Head. This processor has a Cummins 6 cylinder engine. New engine and pumps. Head is in good working order, Woodland computer system, strong hydraulics and cylinders, tight boom, heat, A/C, and lights. Spare head almost complete. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415 2000
$Call for Price
Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

1996 Timbco 415B Harvester with a Fabtek Roller II 18" Head. This machine has a new undercarriage in Nov. 2017 - is @ 95%, spring 2017: new seat, joysticks, front window, and LED lights on front . New Parker Denison pumps in 2015 and new pump drive in 2015. John Deere engine was rebuilt in 2012, 8,500 hours on it at that time, everything but the injectors and turbo, as the previous owner had just replaced them. Newer injectors and turbo on it in fall 2017. Has a revamped 2 roller Fabtek head 18" with on board L 90 Parker valves, High Country Tech computer. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415B 1996
$55,900
Timbco 415D Processor with a 2005 Rolly II Head

Timbco 415D Processor with a 2005 Rolly II Head

1998 Timbco 415D Processor with a 2005 Rolly II Head. This machine has a Cummins engine, runs and starts good, has some blow by, spare Cummins 5.9 engine to go with the machine as well, strong hydraulics and drive system, new pump, cylinders are in good order, swing gear and swing motor are all in good working condition, undercarriage is @ 50% 24" pads double grouser, head was just gone through, newer Woodland IFM computer system, heat, A/C has a compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415D 1998
$72,500
Timbco 415D Processor with Rolly Processing Head ***SOLD***

Timbco 415D Processor with Rolly Processing Head ***SOLD***

1999 Timbco 415D with a Rolly Processing Head. Head has been updated and both the head and the carrier are in great condition for their age. This machine has a Cummins 8.3 engine that starts and runs good and is set up with quick couplers, New monitor screen, new rotate motor, rebuilt measuring system. New wiring harness on head, strong hydraulics and cylinders, feed roller and grab arms are in good working order, tight boom and tight pins all around. Undercarriage is at 65%, valve bank is dry with no visible drips present, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco 415D 1999
$67,900