Sort By:   GridGallery
Photo Title
Make Model Year Price
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Rottne H20B Harvester with 761LF Processing Head ***SOLD***

Rottne H20B Harvester with 761LF Processing Head ***SOLD***

2014 Rottne H20B Harvester with ~2,900 hours. 761LF processing head. Carrier and head are in excellent condition. Leveling and rotating cab. RK 200 Crane. 750/45-30.5 bogie tires @ 80% with Eco tracks @ 90%, 700/70-34 rear tires. All tires have been fluid filled. This machine was factory set with the stump spray system, central lubrication, Espar engine/hydraulic/cab pre-heater, and sun screens on all windows. All pins and bushings on the machine are very tight, the sheet metal is straight, all lights are present. This machine has been very well cared for and it shows with the condition. Check out the videos below and call us for further specs and information. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Rottne H20B 2014
$Call for Price
Tigercat H855C Processor with a SouthStar QS500 Head

Tigercat H855C Processor with a SouthStar QS500 Head

2014 Tigercat H855C Processor with a SouthStar QS500 Head. This machine has a Newer Cummins QSB6.7 Tier 3 4,200 hours ago, runs and starts good, Webasto pre heater, strong hydraulics and new attachment pump, reversible fan. Undercarriage is an F6-140 heavy-duty forestry, Integral track guides/ramp angles. Boom has tight pins and bushings. SouthStar QS 500 Head with Dasa 4 computer system, feed rollers and grab arms are in good working order. Machine has heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Tigercat H822C 2014
$240,500
Ponsse HS10 Cobra Harvester w/ Ponsse H60 Big Wheel Head

Ponsse HS10 Cobra Harvester w/ Ponsse H60 Big Wheel Head

2000 Ponsse HS10 Cobra Harvester with a Ponsse H60 Big Wheel Head. This equipment has an estimated 15,000 hours, CAT 3116 engine, runs and starts good, very clean for age. One set of tracks @ 50%, LoPro 700 Tires HN125 boom, strong hydraulics, tight boom, bogies are in good working condition. Pre heater, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse HS10 2000
$55,000
Ponsse HS16 Ergo Harvester

Ponsse HS16 Ergo Harvester

1999 Ponsse HS16 Ergo Harvester. Owner stated that this harvester has 17,500 hours on machine, CAT 3116 engine overhauled by Ponsse and Caterpillar Spring of 2012, about 1,500 hours ago, this machine has a HN125 Crane in good shape no cracks, hydraulic pumps are strong and in good shape, H73 harvesting head, heat and A/C work good, working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Ponsse HS16 1999
$95,000
Ponsse HS16 Processor with a H73 Head ***SOLD***

Ponsse HS16 Processor with a H73 Head ***SOLD***

1998 Ponsse HS16 Processor with a H73 Head. This machine has a CAT 3116 engine, runs and starts good, has been reworked, 1,300 hours on rebuilt transmission, new drive pumps, strong hydraulics, and cylinders. Tight center section, bogies are in good order, brake bands and seals all NEW. Newer front differential. 600 tires with chains, heat, A/C, and lights. H73 head, new center feed roller, others are in good working condition, strong grab arms and cylinders, measuring system is in good order. Also comes with H53 head, Ponsse just installed new feed motor, saw bearing and saw motor seal and sprocket on this head. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse HS16 1998
$Call for Price
HAHN HSW 110B Self Propelled Harvester ***SOLD***

HAHN HSW 110B Self Propelled Harvester ***SOLD***

1991 Hahn HSW 110B Self Propelled Harvester. This equipment has a newer John Deere 6 cylinder 6068 engine with 2,500 hours, runs and starts good, strong hydraulics and cylinders, new hoses, few minor leaks. Newer heavy duty Case front axle, tight jib boom and grapple, will handle 8', 10', 12', 14', & 16' bang board and chains. Outriggers and log flipper are in good condition, stroke/delimber and knives are in good order. Cab has new heater, drive system is all in good order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hahn HSW 110B 1991
$21,500
HAHN HTL 300F Self Propelled Harvester

HAHN HTL 300F Self Propelled Harvester

1993 HAHN HTL 300F Self Propelled Harvester. This machine has a John Deere 6359 turbo engine, runs and starts good, strong hydraulics, hoses are all in good order, tight controls, drive system is in good working condition, new feed chain, delimber knives and measuring system are in good working order, tight controls, topping saw and chain have been repaired, new bar and chain, tight boom and grapple. Cab has heat and good glass. Has service and parts manual. Easy fifth wheel hook up for travel. Tire chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

Hahn HTL 300F 1993
$25,500
Siiro Hydro Logger Harvester ***SOLD***

Siiro Hydro Logger Harvester ***SOLD***

1985 Siiro Hydro Logger Harvester. This equipment could use a little attention, but is a good little delimber and slasher. This is a stroke style machine without feed rollers, 8' stroke, hook to your loader. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA. ***SOLD***

Siiro Hydro Logger 1985
$6,950
1998 Hyundai 200 Processor with Fabtek Dangle Head

1998 Hyundai 200 Processor with Fabtek Dangle Head

Great running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner

Hyundai Hyundai 200 High Walker 1998
$Call for Price
Komatsu PC200LC Processor with a Waratah HTH622B Head

Komatsu PC200LC Processor with a Waratah HTH622B Head

2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Komatsu PC200LC 2005
$79,500
Komatsu PC228 Processor

Komatsu PC228 Processor

2005 Komatsu PC228 Processor with Log Max 7000 Head. This equipment has 9,000 hours, Komatsu engine, runs and starts good, strong hydraulics and pumps, new chains, new sprockets, new pads, new idlers about 1,200 hours ago, grab arms and rollers are in good working order, measuring system in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment. Machine is located in Northeast USA

Komatsu PC228 2005
$164,500