Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head

Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head

2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. Hour meter reads 13,000 hours. Mercedes Benz engine starts and runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 tires estimated at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Fox 2010
$155,500
Ponsse Fox Processor  H6 Processing Head

Ponsse Fox Processor H6 Processing Head

2019 Ponsse Fox 8 Wheeled Processor with H6 Processing Head. Hour meter reads 9,700 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 60%. 2 sets of 1/2 tracks are included and are like new. C44+ 10m crane, with an H6 processing head. The 3 feed rollers are in good condition. Measuring system works well. Ponsse Opti information system. Ponsse OptiControl hydraulic system. New parts, oils, and maintenance has just been done. Can include a service trailer that has an air compressor, hose crimper, hoses, fittings, and an $8,000 spare swing motor for an additional $20,000. Cab has heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Ponsse Fox 2019
$355,000
Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek FT-133 2000
$89,500
Fabtek FT-133 with Fabtek 4 Roller Head

Fabtek FT-133 with Fabtek 4 Roller Head

2001 Fabtek FT-133 with Fabtek 4 Roller Head. Hour meter reads 15,500 hours. John Deere 6068 crate engine installed 800 hours ago. New hydraulic pump, sprockets, idlers, rails, & rollers were also done at that time. 24" double grouser pads. Proheat preheat system. Boom is tight. New Parker touchscreen CPU and joysticks. New Lexan glass. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek FT-133 2001
$80,000
Fabtek FT-153 Processor with 4 Roller Head

Fabtek FT-153 Processor with 4 Roller Head

2005 Fabtek FT-153 Processor with 4 Roller Head. This equipment runs and starts good, John Deere engine, complete over haul 3 months ago, undercarriage track rollers and sprockets updated 1 year ago, 24" triple grouser, main and final drive pumps new this last summer. Head rollers, grab arm, and saw are in good working order, having issues with measuring system, tight main boom, strong cylinders, Pro-Heat new pump, heat, A/C, decent glass. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek FT-153 2005
$90,000
Fabtek FT 133 Processor with a 4 Roller Head

Fabtek FT 133 Processor with a 4 Roller Head

2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Fabtek FT133 2004
$83,500
Rottne H14 with 561 SP Processing Head

Rottne H14 with 561 SP Processing Head

2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rottne H14 2008
$105,000
Rottne H-14B Harvester with a SP561 LF Head ***SOLD***

Rottne H-14B Harvester with a SP561 LF Head ***SOLD***

2013 Rottne H-14B Harvester with a SP561 LF Head. Only 7,300 hours on this machine. John Deere 6068 engine, runs and starts good, pre-heat system, strong hydraulics and drive system. RK-140 crane, SP-561 LF head is in good working order, Dasa 5 computer, tight boom, 710 tires, Heat, A/C, LED lights, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Rottne H14B 2013
$Call for Price
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Rottne H20 with SP761 Harvesting Head

Rottne H20 with SP761 Harvesting Head

2006 Rottne H20 with SP761 Harvesting Head. Hour meter reads 10,000 hours. John Deere engine. Hydraulic pump is newer with 2,000 hours. 750 tires are estimated at 90%. 2016 SP 761 harvesting head is in good condition. Self-leveling cab with Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Rottne H20 2006
$148,000
Rottne H20 with SP761 Processing Head

Rottne H20 with SP761 Processing Head

2006 Rottne H20 with 2015 SP761 Processing Head. Hour meter reads 19,685 hours. John Deere engine starts and runs good. 750 tires are estimated at 70%. 2015 SP761 processing head, approximately 8,000 hours. Feed wheels in good condition, no cracking, knives in good shape. Preheat. Upgraded D5 computer system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Rottne H20 2006
$132,500
Rottne H21 with SP761 Processing Head

Rottne H21 with SP761 Processing Head

2018 Rottne H21 with SP761 Processing Head. Hour meter reads 5,050 hours. John Deere 6090 engine. 750 tires estimated at 75%, including two sets of tracks that are in good condition. Webasto preheat system for engine, cab, & hydraulics. HK250 crane with a squirt boom and SP761 processing head, feed wheels and measuring system are in good working order. A new, heavier duty rotator was recently installed. Leveling and swing cab. Heated seat with heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rottne H21 2018
$350,000