Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	CAT 501HD with PF48 4 Roller Processing Head 2010 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 9,300 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 60%. Two new delimbing cylinders, measuring wheel, encoder. New data line from the computer to the head, and final drive. Fully serviced, ready to work. Heat, A/C, lights, & satellite radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	CAT	CAT501HD	2010	$110,000
	Ponsse Cobra HS10 Harvester with a Ponsse H53 Head 1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Ponsse	Cobra HS10	1998	$38,500
	John Deere 490E with Fabtek 4 Roller *SOLD* John Deere 490E with Fabtek 4 Roller Processing Head. Hour meter reads 19,031 hours. John Deere 4045T engine starts and runs good. 32" triple grouser pads, undercarriage is estimated at 50%. Fabtek 4 Roller Processing Head is in good working order. Heat, A/C, LED light bar. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.*SOLD*	John Deere	Deere	Unknown	$Call for Price
	Ponsse Ergo with Ponsse H73 Processing Head 2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2002	$49,000
	Ponsse Ergo with H8 Processing Head *ON HOLD* 2023 Ponsse Ergo with H8 Processing Head. Hour meter reads 155 hours. Mercedes Benz OM 926 engine. 710/45-26.5 tires are estimated 95%. Includes two sets of tracks. Webasto preheat system. Ponsse C5 squirt boom. Ponsse H8 processing head is in great condition, measuring system in good working order. Heat, A/C, LED lights, lunch cooler & heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *ON HOLD*	Ponsse	Ergo	2023	$669,500
	Ponsse Ergo Harvester 2006 Ponsse Ergo Harvester with 15,000 hours. Machine runs and starts good and is equipped with the H73E head in great working condition. Good rubber, tracks, and chains go with machine, heat, A/C, radio, and all gauges work. Machines working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2006	$165,000
	Ponsse Ergo with H8 Harvesting Head 2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,615 hours. 710/45-26.5 tires are estimated at 90%. Set of tracks are like new. Active frame, C5 crane, with H8 harvesting head. Lunch heater/cooler and AutoMat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2022	$675,000
	Ponsse Ergo 6 Wheeled with 2021 H8 Head 2014 Ponsse Ergo 6 Wheeled with 2021 H8 Head. Hour meter reads 15,902 hours. C5 crane with internal hoses, 2021 H8 Head with minimal use, harvester pump and and updates to crane at 14,000 hours. Color marking stump spray system. Tires estimated at 80%. Auto-grease & webasto preheat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.	Ponsse	Ergo	2014	$Call for Price
	Ponsse Ergo Harvester with H7 Head 2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2008	$115,000
	Ponsse Ergo Harvester with H7 Harvesting Head 2005 Ponsse Ergo 6 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 13,491 hours. Refurbished by Ponsse in 2016 & 2022. 710/45-26.5 tires are estimated at 75%. Front tires are estimated at 70%. Includes a set of tracks estimated at 70%. Auto-grease and webasto preheat systems. H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. New head pump. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$173,500
	Ponsse Ergo Harvester with H73E Harvesting Head 2004 Ponsse Ergo 6 Wheeled Harvester with 2007 H73E Harvesting Head. Hour meter reads 15,925 hours. 710/45-26.5 tires are estimated at 65%. 2007 H73E head is in good overall condition. All lights are working. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2004	$46,500
	Ponsse Ergo Harvester with H7 Head 2012 Ponsse Ergo Harvester with H7 Head with big saw box. Hour meter reads 11,675 hours, Mercedes Benz engine, runs and starts good. Complete service by Ponsse at 11,200 hours. Updated fire suppression system, tight C4 crane, strong hydraulics and cylinders. 2 sets of tracks @ 95%. 710 tires, pre-heater. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *PRICE REDUCED FROM $240,000*	Ponsse	Ergo	2012	$219,900