Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberpro 725C Processor with Rolly III Head ***SOLD***

Timberpro 725C Processor with Rolly III Head ***SOLD***

2016 TimberPro 725C Processor with a Rolly 3 Head, ~2,100 hours. Woodland cpu, 28" double grouser pads, clean fix fan, Espar preheater - engine, cab, hydraulics, Xenon light package, fire suppression, air ride heated/cooled seat, high speed saw. Cummins 8.3 engine. Very clean, straight and dry machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberpro 725C 2016
$400,000
Timberpro 725D Harvester with Waratah 622B Head

Timberpro 725D Harvester with Waratah 622B Head

2018 Timberpro 725D Harvester with a 2013 Waratah 622B Harvester Head. Carrier has 1,600 hours, Cummins engine, runs and starts good, pre heat system, air ride and heated seat, backup camera, single grousers in excellent condition. Waratah 622B has approximately 9,000 hours, Timbermatic computer system. 24" pads, counter weights on tracks as well, heat, A/C, and LED lights. Warranty until 2,000 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro 725D 2018
$Call for Price
2010 JOHN DEERE 753JH

2010 JOHN DEERE 753JH

2010 JOHN DEERE 753JH TRACKED HARVESTER 6 CYL DEERE WARATAH HTH 623C HEAD 300 HOURS ON NEW SPROCKETS CHAINS AND PADS

John Deere 753JH 2010
$299,000
John Deere 759GH Tracked Harvester with Logmax 7000 Head

John Deere 759GH Tracked Harvester with Logmax 7000 Head

2005 John Deere 759GH Track Harvester with Logmax 7000 Head. This equipment has a 6081 John Deere Diesel Engine, runs and starts good, hydrostatic drive with high and low, strong hydraulics, tight pins and bushings. Undercarriage will need some attention, cut to length Logmax 7000 processing head, Logmate 400 measuring system, topping saw, Thumbnail spiked feed wheels, heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 759GH 2005
$Call for Price
John Deere 803MH Processor with a Waratah 623C Head

John Deere 803MH Processor with a Waratah 623C Head

2015 John Deere 803MH Processor with a Waratah 623C Head. This machine starts & runs good, 4,603 hours on meter, engine and hydraulic pre-heater, cooler debris guard, 5 year JD Link telematics, 30" double grouser pads with slides, undercarriage is @ 50%. Lap seat belt & air ride, standard counterweight, LED work lights, 6.13M boom, premium radio, rear pull down shade, & toolbox. Waratah 632C Head has auto tensioning, 3/4 chain, tilt and 360 rotation. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 803MH 2015
$335,000
John Deere 803MH Harvester w/ Waratah C616 Processor Head

John Deere 803MH Harvester w/ Waratah C616 Processor Head

2017 John Deere 803MH Harvester with a Waratah C616 Processor Head with Top Saw and Butt Finder. Hour meter reads 5,773 hours, runs and starts good, pre heat system, strong hydraulics and cylinders, pumps are all in good working order. Undercarriage is in good condition, tight boom, Waratah C616 head and measuring system is in good working condition, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 803MH 2017
$300,000
Tigercat 822 Processor with a Rolly III Head

Tigercat 822 Processor with a Rolly III Head

2007 Tigercat 822 Processor with a Rolly III Head. This machine has a Newer Cummins engine with 1,100 hours, runs and starts good, Pro Heat system. New Rolly III XTHP R24B Head with 500 hours on head, Woodland computer. No top saw, new undercarriage, new 30" double grouser tracks, new sprockets and idlers with 0 hours. Final drives are one year old. Strong hydraulics and cylinders, tight boom, has a new extra feed roller motor to go with. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tigercat 822 2007
$249,000
Valmet 911 Processor with a 965 Dangle Head

Valmet 911 Processor with a 965 Dangle Head

2001 Valmet 911 Processor with a 965 Dangle Head. This machine has a 5.9 Cummins engine, runs and starts good, 18,000 hours, newer valve cover gaskets, new batteries, new slew gear on cab, strong hydraulics and cylinders, new link where head connects. New computer screen, head will need some rewiring. Tight boom, bogies are in good order, tires are @ 40%. Heat, A/C needs a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 911 2001
$44,500
Valmet 911.3 Harvester with a 370.2 Head

Valmet 911.3 Harvester with a 370.2 Head

2005 Valmet 911.3 Harvester with a 370.2 Head. This processor has a Sisu engine, runs and starts good, strong hydraulics and transmission, tight controls. Hour meter reads 16,500 hours, tight boom, new boom cylinder, newer rotator. Tight center section. 370.2 head is in good working order, measuring system working as it should. Recently updated computer system. Heat, A/C, and lights. Good glass. Working daily. Lots of new parts Installed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 911.3 2005
$Call for Price
Valmet 911.3 Harvester  ***SOLD***

Valmet 911.3 Harvester ***SOLD***

2004 Valmet 911.3 Harvester with a 370.2 Head. This machine runs and starts good, ~12,000 hours, strong hydraulics, solid boom, head is in good working order. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet 911.3 2004
$129,900
Valmet 911.3 Harvester with a 360.2 Head

Valmet 911.3 Harvester with a 360.2 Head

2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 911.3 2006
$69,500
Komatsu 911.4 Harvester with a 370.2 Head ***SOLD***

Komatsu 911.4 Harvester with a 370.2 Head ***SOLD***

2011 Komatsu 911.4 Harvester with a 370.2 Head. This machine has 6,700 hours, Sisu engine- runs and starts good, new batteries, strong hydraulics and cylinders, leveling system is in good order, tight pins and bushings, bogies are in good order, extend-a-boom in good condition. Measuring system in good working order. Feed rollers and grab arms are in good condition. 700 tires @ 60% with a set of tracks @ 40%. Machine will have a complete service from manufacturer prior to sale. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Komatsu 911.4 2011
$137,500