Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	2000 JOHN DEERE 120 2000 JOHN DEERE 120 TRACKED HARVESTER 4 CYL DEERE FOUR ROLLER HEAD INDEPENDENT COUNTER	John Deere	120	2000	$49,500
	John Deere 653G with Fabtek 4 Roller *SOLD* 2002 John Deere 653G with Fabtek 4 Roller Processing Head. John Deere 6068T engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 85%. One new final drive, radiator, & a new oil cooler. Rebuilt saw motor, new knives, and rollers and arms from a 2015 head. Boom & stick cylinders resealed in the last year. ProHeat preheat system. Suregrip joystick controls. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	John Deere	653G	2002	$Call for Price
	John Deere 1270E Harvester with a H480C Head 2011 John Deere 1270E Harvester with a H480C Head. John Deere 6 cyl. engine, 500 hours on a complete overhaul. Strong hydraulics and cylinders, hydraulic pump was changed out at 5,600 hours. Center section is tight, squirt boom works as it should, rotating & leveling cab. Auto lube, pre heater. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.	John Deere	1270E	2011	$119,500
	John Deere 703JH with Waratah 622B Processing Head 2009 John Deere 703JH with Waratah 622B Processing Head. Hour meter reads 18,126 hours. John Deere 6081H engine. 24" single grouser pads, undercarriage is estimated at 65%. Espar preheat system. Suregrip joystick controls, heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	703JH	2009	$139,500
	John Deere 753J with CF20 Processing Head 2014 John Deere 753J with CF20 Processing Head. Hour meter reads 5,400 hours. John Deere 6cyl engine. 24" double grouser pads, undercarriage is estimated at 75%. JP Skidmore computer system. CF20 processing head has good feed wheels and measuring system is in working order. Heat, A/C, LED lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	753J	2014	$259,500
	2006 John Deere 703G 2006 John Deere 703G Harvester. This equipment has 15,477 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 70%, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Delvin @ (715) 699-6271 or (715) 634-1555	John Deere	703g	2006	$95,000
	John Deere 1270E 6W Processor with Waratah 616C Head 2012 John Deere 1270E 6W Processor with Waratah 616C Processing Head. Hour meter reads 14,112 hours. John Deere 6090 engine, hydrostatic transmission. 710/55-R34 tires are estimated at 80%, 600 tires are estimated at 70%. CH7 crane is tight. New windshield & main lift cylinder. Waratah 616C - went through a full rebuild at 9,500 hours. Self leveling cab with heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	1270E	2012	$199,000
	John Deere 753J with CF20 Processing Head 2014 John Deere 753J with CF20 Processing Head. Hour meter reads 7,050 hours. John Deere 6081H engine. 24" double grouser pads, undercarriage is estimated at 75%. Boom is tight, swing bearing in good condition. Espar preheat system. JP Skidmore CF20 processing head is in good condition, new wiring, feed wheels & knives are good. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	753J	2014	$215,000
	John Deere 703JH with a Waratah 616 Processing Head 2014 John Deere 703JH with a Waratah 616 Processing Head. John Deere 6068 engine. Espar preheat system. 24" double grouser pads, undercarriage is brand new except for the pads. Hydraulic pumps were done around 6,000 hours. Timbermatic measuring system is in good working condition, Suregrip joysticks. Clean cab, heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	703JH	2014	$155,000
	John Deere 120 with Fabtek 4 Roller Head 2000 John Deere 120 with Fabtek 4 Roller Head. Hour meter reads 22,380 hours. John Deere 4045T engine, 1,200 hours on new engine, turbo, water pump, oil cooler, belts, & pullies. 24" triple grouser pads, undercarriage is estimated at 60%. Main pump and hoses were done 600 hours ago. Most cylinders have been just repacked. New wiring harnesses and 2 new encoders on head. New computer components. New leveling motors on the head, 3rd wheel measuring system is in good working order. Proheat preheat system for engine was just gone through, cab, & hydraulics. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. 2 new encoders on the head.	John Deere	120	2000	$52,500
	John Deere 135G with HAHN 133 Processing Head 2013 John Deere 135G with HAHN 133 Processing Head. Hour meter reads 1,780 hours. 28" triple grouser pads, undercarriage is estimated at 80%. Hahn 133 processing head is in good condition. Rearview camera. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	135G	2013	$157,500
	John Deere 490E with Fabtek 4 Roller *SOLD* John Deere 490E with Fabtek 4 Roller Processing Head. Hour meter reads 19,031 hours. John Deere 4045T engine starts and runs good. 32" triple grouser pads, undercarriage is estimated at 50%. Fabtek 4 Roller Processing Head is in good working order. Heat, A/C, LED light bar. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.*SOLD*	John Deere	Deere	Unknown	$Call for Price