Harvesters/Processors For Sale

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2019 Ponsse Beaver with new Ponsse H6 Harvesting Head. Hour meter reads 10,095 hours. C44 crane, H6 harvesting head is brand new with 0 hours. Tires are estimated at 75%. Webasto preheat system, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2018 Rottne H21 with SP761 Processing Head. Hour meter reads 5,050 hours. John Deere 6090 engine. 750 tires estimated at 75%, including two sets of tracks that are in good condition. Webasto preheat system for engine, cab, & hydraulics. HK250 crane with a squirt boom and SP761 processing head, feed wheels and measuring system are in good working order. A new, heavier duty rotator was recently installed. Leveling and swing cab. Heated seat with heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2006 Rottne H20 with 2015 SP761 Processing Head. Hour meter reads 19,685 hours. John Deere engine starts and runs good. 750 tires are estimated at 70%. 2015 SP761 processing head, approximately 8,000 hours. Feed wheels in good condition, no cracking, knives in good shape. Preheat. Upgraded D5 computer system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.