Harvesters/Processors For Sale
Photo |
Title
|
Make | Model | Year | Price |
Ponsse Ergo Harvester with H7 Head2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$99,900
|
|
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Cobra HS10 | 1998 |
$38,500
|
|
Ponsse Ergo with H8 Harvesting Head2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,225 hours. Mercedes OM 936 Stage V/Tier 4F engine. 710/45-26.5 tires are estimated at 90%, tracks can be included. C44+ crane with an H8 harvesting head. Center and crane are tight. Webasto preheat system. Active Frame. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2022 |
$675,000
|
|
Ponsse Fox 8 Wheel Harvester with a H6 Head2011 Ponsse Fox 8 Wheel Harvester with a H6 Head. Hour meter reads 14,000 hours. Mercedes Benz engine starts & runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. H6 head is in good working order. 700 tires at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2011 |
$132,500
|
|
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. Hour meter reads 13,000 hours. Mercedes Benz engine starts and runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 tires estimated at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2010 |
$155,500
|
|
2015 Ponsse Ergo2015 Ponsse Ergo Harvester |
Ponsse | Ergo | 2015 |
$Call for Price
|
|
Ponsse Ergo with H7 Harvesting Head2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$167,500
|
|
Ponsse Scorpion King Harvester2020 Ponsse Scorpion King Harvester. 5,400 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | 2020 |
$Call for Price
|
|
Ponsse Fox Processor H6 Processing Head2019 Ponsse Fox 8 Wheeled Processor with H6 Processing Head. Hour meter reads 9,700 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 60%. 2 sets of 1/2 tracks are included and are like new. C44+ 10m crane, with an H6 processing head. The 3 feed rollers are in good condition. Measuring system works well. Ponsse Opti information system. Ponsse OptiControl hydraulic system. New parts, oils, and maintenance has just been done. Can include a service trailer that has an air compressor, hose crimper, hoses, fittings, and an $8,000 spare swing motor for an additional $20,000. Cab has heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Ponsse | Fox | 2019 |
$355,000
|
|
Ponsse Scorpion with H7 Harvesting Head2020 Ponsse Scorpion King with H7 Harvesting Head. Hour meter reads 4,000 hours. Mercedes Benz OM936, 285 HP, Tier 4F engine. 710/45-26.5 Nokian Forest King F2 tires are estimated at 90%, includes two sets of tracks that are estimated at 75%. C50 crane and center section are tight. Ponsse H7 harvesting head is in good condition, measuring system is in working order. DAFO fire suppression system. Webasto preheat system. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion | 2020 |
$575,000
|
|
Ponsse Ergo with H7 Harvesting Head ***SOLD***2008 Ponsse Ergo with H7 Harvesting Head. This machine went through Ponsse's rebuild program about 4,000 hours ago. Reman Mercedes engine, front differential, & transmission. New wire harnesses. Newer hydraulic pump installed 1,800 hours ago. 700 tires are estimated at 50%, one set of tracks that are included are estimated at 70%. H7 processing head is in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Ponsse | Ergo | 2008 |
$162,500
|
|
Ponsse Ergo 6 Wheeled Processor with H73E Head2006 Ponsse Ergo 6 Wheeled Processor with H73E Head. Hour meter reads 28,500 hours. Mercedes engine. Tires are estimated at 50%, carriers are estimated at 65%. New pinion bearing and power divider in 2021. Webasto preheat system. Opti computer system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2006 |
$39,900
|