Sort By:   GridGallery
Photo Title
Make Model Year Price
CAT 501HD Harvester with Fabtek 4 Roller Head

CAT 501HD Harvester with Fabtek 4 Roller Head

2008 CAT 501HD Harvester with Fabtek 4 Roller Head. Hour meter reads ~14,000 hours. CAT C6.6 engine starts and runs good. 24" single grouser pads. Undercarriage is estimated at 65%. Newer motor and pump with 600 hours. New ICAN computer. New chains on the feed wheel, also has new knives. Preheater. Enclosed cab has heat, A/C, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CAT 501HD 2008
$105,000
Rottne H14 with 561 SP Processing Head

Rottne H14 with 561 SP Processing Head

2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rottne H14 2008
$105,000
EcoLog 590D Harvester with a Logmax 7000 Head

EcoLog 590D Harvester with a Logmax 7000 Head

2010 EcoLog 590D Harvester with a Logmax 7000 Head. This harvester has a Mercedes Benz engine, runs and starts good, Wabasto pre heater, strong hydraulics and pumps, pumps have been rebuilt, cylinders and valve bank are in good working order, auxiliary hydraulic cooler. Tight center section, bogies and axles are in good condition, tight boom and squirt boom. 300 crane. Logmax 7000 head in good working order, solid grab arms, bar saw and measuring wheel are in good working condition, Dasa 4 computer system. Good windows, Heat, A/C, and lights. Tires are @ 50% and better, 700 x 30.5 front and 700 x 34 rears. Tracks and chains are @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ecolog 590D 2010
$109,500
CAT 501HD with PF48 4 Roller Processing Head

CAT 501HD with PF48 4 Roller Processing Head

2010 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 9,300 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 60%. Two new delimbing cylinders, measuring wheel, encoder. New data line from the computer to the head, and final drive. Fully serviced, ready to work. Heat, A/C, lights, & satellite radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

CAT CAT501HD 2010
$110,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$115,000
CAT 501HD with PF48 4 Roller Processing Head

CAT 501HD with PF48 4 Roller Processing Head

2012 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 14,000 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads. Undercarriage is estimated at 90%. Complete new measuring system. Head rotator gears were just replaced and ProHeat serviced. New saw proxy and the orings between the valve sections. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 501HD 2012
$115,000
2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH TRACKED HARVESTER 6 CYL DEERE

John Deere 703JH 2014
$119,000
2007 JOHN DEERE 1270D

2007 JOHN DEERE 1270D

2007 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE 600 RUBBER

John Deere 1270D 2007
$119,000
John Deere 1270E Harvester with a H480C Head

John Deere 1270E Harvester with a H480C Head

2011 John Deere 1270E Harvester with a H480C Head. John Deere 6 cyl. engine, 500 hours on a complete overhaul. Strong hydraulics and cylinders, hydraulic pump was changed out at 5,600 hours. Center section is tight, squirt boom works as it should, rotating & leveling cab. Auto lube, pre heater. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 1270E 2011
$119,500
Timberpro TN725B with Rolly II Processing Head

Timberpro TN725B with Rolly II Processing Head

2014 Timberpro TN725B with Rolly II Processing Head. Hour meter reads 12,000 hours. Cummins QSC 8.3 engine. 24" double grouser pads, undercarriage is brand new. ANSUL fire suppression, IQAN MD4 HD control, & espar preheat system. Rolly II processing head is in good condition, feel wheels and knives are in good condition, measuring system in working order. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725B 2014
$119,900
2016 TN725C Timberpro

2016 TN725C Timberpro

This unit has all guards and glass in good shape, as well as the AC is nice and cold. It does have an Eberspacher pre heater in it and it has forward and reverse , Hi-Low Range. and Hydraulic brakes. The under carriage is at roughly 40% and has 23 3/4 " pads. We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!

- - 2023
$129,500
John Deere 1470E with H290 Processing Head

John Deere 1470E with H290 Processing Head

2010 John Deere 1470E with H290 Processing Head. Hour meter reads ~16,000 hours. John Deere 6090H engine starts and runs good. Very dry engine bay, no leaks or buildup. 750/55-26.5 tires on the rear are at 55%. 700/70R34 tires on the front are at 80%. This machine has a tight and dry center section and boom. AFEX fire suppression system, Webasto preheater, self-leveling cab, & Timbermatic computer system. H290 processing head is in good shape, feeders and roller work as they should. Owner operated. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1470E 2010
$131,500