Sort By:   GridGallery
Photo Title
Make Model Year Price
Komatsu 911.4 Harvester with a 370.2 Head

Komatsu 911.4 Harvester with a 370.2 Head

2011 Komatsu 911.4 Harvester with a 370.2 Head. This machine has 6,700 hours, Sisu engine- runs and starts good, new batteries, strong hydraulics and cylinders, leveling system is in good order, tight pins and bushings, bogies are in good order, extend-a-boom in good condition. Measuring system in good working order. Feed rollers and grab arms are in good condition. 700 tires @ 60% with a set of tracks @ 40%. Machine will have a complete service from manufacturer prior to sale. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu 911.4 2011
$179,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$180,000
John Deere 1470D Processor with Waratah H290 Head

John Deere 1470D Processor with Waratah H290 Head

2008 John Deere 1470D Processor with Waratah H290 Head. Hour meter reads 10,151 hours, John Deere 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, drive system is in good working order, tight CH885 squirt boom, head has good feed rollers and grab arms, computer and measuring system are in good working condition, bogies and axles up to par, tight center section, 700 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470D 2008
$185,000
CAT 501 Harvester with a 4 Roller Head

CAT 501 Harvester with a 4 Roller Head

2013 CAT 501 Harvester with a 4 Roller Head. Hour meter reads 6,050 hours, runs and starts good, Pro-Heat system, strong hydraulics and pumps, undercarriage is @ 60%, 2" double grouser. 4 roller head, rollers, grab arms, and saw are in good working condition, computer and measuring system is in good working order, heat, A/C, lights, Full Synthetic. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 501 2013
$185,000
TimberPro TF 810 Combo Machine

TimberPro TF 810 Combo Machine

2007 TimberPro TF 810 Combo Processor and Harvester. Owner stated that this unit has a Keto 155HD head has been rebuilt in the last 2,000 hours, 6,900 hours on frame. Cummins 6.7, runs and starts good, also has hook ups for clam bunk, strong hydraulics. Newer center bearing, pins and bushings. Newer main boom pins and bushings. Boom has been re-hosed recently. Hakmet/Motomitt 4 computer. Manuals included for machine and head. 2 sets of tracks included. Newer cutting edge on blade. Owner said that this machine is dry, has tight bogies, new roto gear box, joystick controls, blade, heat, a/c radio. Tires 710's 60% tracks 80%. Ready to Work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TF810 2007
$197,500
Link Belt 210X2 Processor with Southstar QS500 Head

Link Belt 210X2 Processor with Southstar QS500 Head

2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Link Belt 210X2 2013
$198,500
Timbco 415EX Processor

Timbco 415EX Processor

2005 Timbco 415ex, Rolly II, 70% U/C, re-built head

Timbco 415ex 2005
$199,000
CAT 501 Harvester with a Fabtek 4 Roller Head

CAT 501 Harvester with a Fabtek 4 Roller Head

2013 CAT 501 Harvester with a Fabtek 4 Roller Head. Hour meter reads 9,000 hours, starts & runs good, strong hydraulics and cylinders, undercarriage is in good order, tight boom and head. Fabtek head has good rollers and grab arms, computer and measuring system are in good working condition. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 501 2013
$205,000
2008 John Deere 1270D Harvester

2008 John Deere 1270D Harvester

2008 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE HYDRASTATIC DRIVE 480C HEAD 600 RUBBER

John Deere 1270D 2008
$210,000
TimberPro TL725-B Harvester with a Rolly II Head

TimberPro TL725-B Harvester with a Rolly II Head

2012 TimberPro TL725-B Harvester with a Rolly II Head. This machine has a Cummins engine, runs and starts good, strong hydraulics and cylinders, transmission was just resealed as well as the oil pan. Undercarriage was just gone through - sprockets and rollers, tall single grouser 24" pads. Rolly II was recent relined, bored, pinned, and bushed. Woodland computer, tight boom, newer final drives. Updated fire suppression system, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TL725- 2012
$215,000
TimberPro TL725B Processor with Rolly II R24R Head

TimberPro TL725B Processor with Rolly II R24R Head

2010 TimberPro TL725B Processor with Rolly 2 R24R Intermittent Disc Processing Head with Dasa4 operating system. ~9100 hours on carrier. Cummins 8.3 300 HP engine. Undercarriage is estimated @ 80%, 24" single grouser pads. Very clean and straight machine and head. No major hydraulic leaks. Webasto Pre-heater and fire protection. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL725B 2010
$215,000
CAT 501 Harvester

CAT 501 Harvester

2010 CAT 501 Harvester with a Fabtek 4-Roller Head. This machine has ~10,500 hours, Pro heat, A/C, new jet fit bar and chain set up, independent measuring wheel, new injectors last fall, oil changed every 200 hours, undercarriage and sprockets are @ 50%, rails and idlers are @ 75%. This is a clean, well maintained machine that is working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 501 2010
$235,000