Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 759GH Tracked Harvester with Logmax 7000 Head

John Deere 759GH Tracked Harvester with Logmax 7000 Head

2005 John Deere 759GH Track Harvester with Logmax 7000 Head. This equipment has a 6081 John Deere Diesel Engine, runs and starts good, hydrostatic drive with high and low, strong hydraulics, tight pins and bushings. Undercarriage will need some attention, cut to length Logmax 7000 processing head, Logmate 400 measuring system, topping saw, Thumbnail spiked feed wheels, heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 759GH 2005
$49,500
Valmet 911.3 Harvester with a 370.2 Head

Valmet 911.3 Harvester with a 370.2 Head

2005 Valmet 911.3 Harvester with a 370.2 Head. This processor has a Sisu engine, runs and starts good, strong hydraulics and transmission, tight controls. Hour meter reads 16,500 hours, tight boom, new boom cylinder, newer rotator. Tight center section. 370.2 head is in good working order, measuring system working as it should. Recently updated computer system. Heat, A/C, and lights. Good glass. Working daily. Lots of new parts Installed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 911.3 2005
$Call for Price

Timberjack 1270D Harvester with a 2012 Waratah H270 Head

2005 Timberjack 1270D Harvester with a 2012 Waratah H270 Head. This equipment has a John Deere 6081 engine, runs and starts good, Espar pre heat. Timbermatic 300 computer in good working order. Strong hydraulics, and cylinders. Tight boom and head, boom base has been reworked, replaced cylinder, extended boom has been redone, 700 tires and tracks, tracks are @ 70%, new front glass, sides are in good shape, cab rotation and level is in good working order. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270D 2005
$159,500
Timbco 425EXT Harvester with a 2015 Rolly II Head

Timbco 425EXT Harvester with a 2015 Rolly II Head

2005 Timbco 425EXT Harvester with a 2015 Rolly II Head. This equipment has 8,100 hours, Cummins QSC 8.3L, runs and starts good, Espar pre heat system, strong hydraulics and drive motors, newer undercarriage, 24" double grouser pads. Tight boom, swing gear is in good working order. 2015 Rolly II Processing head with 1,250 hours, upgraded to a Woodland Eaton Computer system with books. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 425EXT 2005
$200,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$115,000
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, hour meter reads 22,300 hours, Wabasto pre-heat system, strong hydraulics and cylinders, pumps are up to par, HN-125 crane, tight boom, squirt boom works as it should, Nokian 700/45/26 tires. Bogies are in good working order, head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$85,000
Timbco 445 EXL Processor with a 22" Quadco Head

Timbco 445 EXL Processor with a 22" Quadco Head

2005 Timbco 445 EXL with a 22" Quadco Head. Feller has an 8.3 Cummins engine with approx. 3,000 hours, 98% undercarriage, new injection pump, Rexroth hydraulic pumps and valve bank just resealed. Tight machine with new glass, heat, A/C and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 445EXL 2005
$129,500
Ponsse Ergo Harvester with a H73E Harvesting Head

Ponsse Ergo Harvester with a H73E Harvesting Head

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, 17,000 hours, pre-heat system, strong hydraulics and cylinders, new main pump at 13,500 hours, new joystick controls, old ones to go with as spares, tight boom, H200 crane, 710 tires with Eco track and a set of rear chains. Head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Ponsse Ergo 2005
$98,000
Ponsse Ergo Processor

Ponsse Ergo Processor

2005 Ponsse Ergo Processor. This machine has a Mercedes Benz engine, runs and starts good, HN125 crane 73H head, strong hydraulics and drive system, tight boom and head, grab arms are in good working order, went through measuring system a year ago, cradles and axles are in good working order, tight center section, 710 tires @ 70% with tracks, front tires are @ 60%, Wabasto pre heater, fire suppression system, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2005
$125,900
Ponsse Ergo Harvester with a H73 Head

Ponsse Ergo Harvester with a H73 Head

2005 Ponsse Ergo Harvester with a H73 Head. This machine has a HN125 Crane, 19,000 hours, runs and starts good, tracks are @ 60%. New CPU, wiring on boom and head replaced last year, new feed rollers & chain auto tensioner last year, leveling system redone, new module and valves, fire suppression, new measuring system, new knives last year, heat, and A/C, all lights are operable. Camo covering on sheet metal. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2005
$110,000
Timbco 415EX Processor with a Rolly II Head

Timbco 415EX Processor with a Rolly II Head

2005 Timbco 415EX Processor with a Rolly II Head. This machine runs and starts good, hour meter reads 12,000 hours, Sisu engine, strong hydraulics, drives, and cylinders, tight boom, undercarriage is in good working order, Rolly II head has good roller and grab arms, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415EX 2005
$104,900
Fabtek FT-153 Processor with 4 Roller Head

Fabtek FT-153 Processor with 4 Roller Head

2005 Fabtek FT-153 Processor with 4 Roller Head. This equipment runs and starts good, John Deere engine, complete over haul 3 months ago, undercarriage track rollers and sprockets updated 1 year ago, 24" triple grouser, main and final drive pumps new this last summer. Head rollers, grab arm, and saw are in good working order, having issues with measuring system, tight main boom, strong cylinders, Pro-Heat new pump, heat, A/C, decent glass. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek FT-153 2005
$116,500