Delimbers For Sale
| Photo |
Title
|
Make | Model | Year | Price |
|
Link Belt 3400Q Stroke Delimber1997 Link Belt 3400Q Stroke with Denis Boom Delimber. This machine has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA. |
Link Belt | 3400Q | 1997 |
$18,900
|
|
John Deere 690E with Propac 453 Delimber1997 John Deere 690E with Propac 453 Delimber. Hours are unknown, new 6068T engine was installed in 2017 with receipts. Drive motors in good working order, 32" triple grouser pads, undercarriage is estimated at 75%. Propac 453 is in good condition, newer boom is straight, knives and hoses are good. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 690e | 1997 |
$44,500
|
|
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Komatsu | 200LC-6 | 1997 |
$35,900
|
|
Link-Belt 2800 with a Denharco DT3500 Delimber1997 Link-Belt 2800 with 1998 Denharco DT3500 Delimber. This equipment runs and starts good, around 11,500 hours, strong hydraulics, cylinders and hoses are in order, straight boom and inner boom, knives are in good working condition, butt plate, undercarriage is @ 30%, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Link Belt | 2800 | 1997 |
$51,500
|
|
Komatsu PC200 Delimber with a Risley 2000B Limit1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 | 1998 |
$50,000
|
|
Link Belt 2800 Quantum with ProPac 453 Delimber1998 Link Belt 2800 Quantum with ProPac 453 Delimber. This equipment has an Isuzu 6 cyl. engine, starts & runs good, strong pumps and drive motor, straight boom and good cables. Undercarriage is in good working order. Hour meter reads 13,500 Hours. New windows & seat. Fresh oil and all filters. Runs perfect. Circle topping saw - just had the saw hammered, new teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Link Belt | 2800 | 1998 |
$64,500
|
|
Komatsu PC200 with Limmit 2000B Delimber1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Komatsu | PC200 | 1998 |
$84,500
|
|
Komatsu PC200 LC-6 with a ProPac 453 Delimber1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 LC-6 | 1999 |
$45,900
|
|
1999 Hyundai 210 LC-3 High Walker Delimber1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!! |
Hyundai | 210-lc-3 H/W | 1999 |
$Call for Price
|
|
Daewoo LL220 with Propac 453 Delimber2000 Daewoo LL220 with Propac 453 Delimber. Hour meter reads 9,880 hours. New Daewoo engine and rotary motor for the hydraulics with less than 1,000 hours. 24" double grouser pads, undercarriage is estimated at 75%, new tracks pins & rollers, some new pads and hardware. Propac 453 delimber is in good condition, bushings were just replaced, boom is straight. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Daewoo | LL220 | 2000 |
$34,500
|
|
Chambers Delimbinator2000 Chambers Delimbinator. New John Deere engine & set of chains. Floor is in good condition. Tires are good. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Chambers | Delimbinator | 2000 |
$26,500
|
|
John Deere 200LC with Denharco DT4400 Delimber ***SOLD***2001 John Deere 200LC with Denharco DT4400 Delimber. Hour meter reads 17,619 hours. John Deere 6068T engine. 28" triple grouser pads, undercarriage is estimated at 50%. Denharco DT4400 delimber is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
John Deere | 200LC | 2001 |
$Call for Price
|