Sort By:   GridGallery
Photo Title
Make Model Year Price
Chambers Delimbinator

Chambers Delimbinator

2000 Chambers Delimbinator. New John Deere engine & set of chains. Floor is in good condition. Tires are good. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Chambers Delimbinator 2000
$26,500
Daewoo LL220 with Propac 453 Delimber

Daewoo LL220 with Propac 453 Delimber

2000 Daewoo LL220 with Propac 453 Delimber. Hour meter reads 9,880 hours. New Daewoo engine and rotary motor for the hydraulics with less than 1,000 hours. 24" double grouser pads, undercarriage is estimated at 75%, new tracks pins & rollers, some new pads and hardware. Propac 453 delimber is in good condition, bushings were just replaced, boom is straight. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Daewoo LL220 2000
$34,500
Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

2002 Komatsu PC 200 LC-7 with a Limmit 2000B Delimber. This machine has 14,440 total hours. runs and starts good, 1,650 hours on new hydraulic pump, all hydraulic cylinders resealed, welded line bored with new pins bushings throughout, heat & A/C. Tight, dry machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC 200 LC-7 2002
$35,000
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

Komatsu 200LC-6 1997
$35,900
John Deere 160 with Propac 453 Delimber

John Deere 160 with Propac 453 Delimber

2004 John Deere 160 with Propac 453 Delimber. Hour meter reads 16,978 frame hours. New engine with 3,800 hours. 24" triple grouser pads, undercarriage is estimated at 75%. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 160 2004
$38,500
John Deere 690D with Propac 453 Delimber

John Deere 690D with Propac 453 Delimber

1990 John Deere 690D with Propac 453 Delimber. 30" triple grouser pads, undercarriage is estimated at 75%. Brand new head with new cylinders, new hydraulic pump, receipts available upon request. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 690D 1990
$38,500
LinkBelt 2800 with Propac 453 Delimber ***ON HOLD***

LinkBelt 2800 with Propac 453 Delimber ***ON HOLD***

1996 LinkBelt 2800 with Propac 453 Delimber. Hour meter reads 18,249 hours. Isuzu 6BG1T engine. 32" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order. Topping saw. Boom is straight. Grab arms are tight. Forestry package, heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

Link Belt 2800 1996
$41,500
John Deere 690E with Propac 453 Delimber

John Deere 690E with Propac 453 Delimber

1997 John Deere 690E with Propac 453 Delimber. Hours are unknown, new 6068T engine was installed in 2017 with receipts. Drive motors in good working order, 32" triple grouser pads, undercarriage is estimated at 75%. Propac 453 is in good condition, newer boom is straight, knives and hoses are good. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 690e 1997
$44,500
John Deere 690E with a Lim-mit 2000B Delimber

John Deere 690E with a Lim-mit 2000B Delimber

1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Electronic idle will need work. Another 690E parts machine with a LIM-MIT delimber can be included. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA.

John Deere 690E 1996
$45,000
Komatsu PC200 LC-6 with a ProPac 453 Delimber

Komatsu PC200 LC-6 with a ProPac 453 Delimber

1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 LC-6 1999
$45,900
Daewoo Doosan SL300LC-V Stroker Delimber

Daewoo Doosan SL300LC-V Stroker Delimber

2003 Daewoo Doosan SL300LC-V Stroker Delimber. Hour meter reads 18,385 hours. 28" double grouser pads, undercarriage is estimated at 75%. Pierce delimbinator is in good condition. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Daewoo Doosan SL300LC-V 2003
$49,500
Komatsu PC200 Delimber with a Risley 2000B Limit

Komatsu PC200 Delimber with a Risley 2000B Limit

1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 1998
$50,000