Sort By:   GridGallery
Photo Title
Make Model Year Price
Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

2000 Hydro Ax 611 EX Feller Buncher with 22" Koering Head. This machine has a newer engine, turbo, main drive motor and main pump are all newer, new batteries and cables, main grab arm cylinders are new, all pressures have been tested, set, and checked. New teeth, new glass in cab, main drive gear box and the main hanger bearing were just replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 611 2000
$38,500
Hydro Ax 511EX Feller Buncher

Hydro Ax 511EX Feller Buncher

2001 Hydro Ax 511EX Feller Buncher. This cutter has a 6068 John Deere engine, runs and starts good, newer re-man engine, strong hydraulics and transmission, cylinders are in good working order, tight center section and lift arms, 20" Waratah head, straight disc, newer teeth could be turned. Newer Lexan glass, 28Lx26 tires 50%. Heat a/c and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 511EX 2001
$38,500
Hydro-Ax 470 Feller Buncher ***SOLD***

Hydro-Ax 470 Feller Buncher ***SOLD***

2004 Hydro-Ax 470 Feller Buncher. This machine has 8,000 hours, runs and starts good, newer Cummins engine about 700 hours ago, new radiator, tight center section, strong hydraulics, grab arms and cylinders in good order. Disc has a few cracks will need attention soon, 28Lx26 tires @ 50%, tight joystick controls, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SOLD***

Hydro-Ax 470 2004
$42,500
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 with 22" sidecut 1 owner operator 4650 original hours. Has mostly new carbides newer skylight and front windshield 2 new front firestone tires 30Lx26 Joystick controls heat air heat grid quick couplers and 1 set babac bearpaw chains. Cummins 5.9 does not burn any oil and has zero hydraulic leaks. Very tight machine that was greased daily and well maintained. Ready to work, this buncher can lay down a lot of wood. Retired.

Hydro-Ax 570 22" Sidecut 2004
$70,000
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

2004 Hydro Ax 470 Feller Buncher. This equipment has a Cummins 6bt engine, runs and starts good, quick couplers. Strong hydraulics and cylinder. Joystick control. New injection pump, new hydrostat pump, transfer case was gone through, gear box was gone through. New disc. 28L x 26 tires 3 are @ 90%, 1 tire is @ 75% with a set of Bear Claw chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hydro-Ax 470 2004
$45,500
Hydro-Ax 670 Feller Buncher

Hydro-Ax 670 Feller Buncher

2005 Hydro-Ax 670 Feller Buncher. Owner stated that this unit has a new engine, less than thirty hours on it, new pins and bushings, hydrostatic drives and saw drives, pressure checked and adjusted like new. Owner said that this machine has one new tire (30.5 Firestone) others are about 50-55%, and new windshield. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hydro-Ax 670 2005
$72,500
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

2005 Hydro Ax 470 Feller Buncher. This machine has a Cummins engine, runs and starts good, new oil pan gasket, in-cooler, hydraulic cooler, new fan. Strong hydraulics and cylinders, joystick machine. 22" Head, 28Lx26 tires - 2 are new. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 470 2005
$40,000
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

HYDRO AX 470 WITH PRENTICE CH-50 HEAD 6 CYL CUMMINS LEVER STEER 28L-26 RUBBER

Hydro-Ax 470 2006
$62,500
Hydro Ax 711EX Feller Buncher

Hydro Ax 711EX Feller Buncher

2000 Hydro Ax 711EX Wheeled Feller Buncher. This machine has a 8.1L John Deere engine that was rebuilt approximately 1,000-1,500 hours ago, 11,500 frame hours, new blade, new transfer case approximately 1,000-1,500 hours. Strong hydraulics and cylinders. Tight center section, cradles are in good working order, straight disc good teeth, 22" cut. 30.5 x 32 tires. Heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hydro-Ax 711EX Unknown
$44,900
Hydro-Ax 411 EX

Hydro-Ax 411 EX

Hydro-Ax 411 EX with Timbco bar saw head. Tires are 23.1x26 at 90-95%. 7000 hours. Clean machine in good condition.

Hydro-Ax 411 EX Unknown
$21,000