Featured in Chippers

Sort By:   GridGallery
Photo Title
Make Model Year Price
Bandit 3090 Whole Tree Chipper

Bandit 3090 Whole Tree Chipper

2017 Bandit 3090 Whole Tree Chipper. This equipment has a CAT C18 765 HP engine, rebuilt by CAT at 800 hours due recall. New pistons and rings, 1,200 hours. This machine is in Like New condition. Remote mounted radiator, tether remote, wireless remote, 2 Emergency shutoffs. Inline hydraulic fan, Proheat engine heater. Extra large hydraulic landing gear. Saylor air compressor with 15 gallon tank. Deluxe LED light package, remaining CAT Warranty until November 2022 or 5,000 hours. Drum warranty by Bandit till 2022. Extra knives and belts. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bandit 3090 2017
$338,000
Bandit Model 2590 Whole Tree Chipper

Bandit Model 2590 Whole Tree Chipper

2013 Bandit Model 2590 Whole Tree Chipper. This chipper has a CAT C-15 585 HP turbo diesel engine with only 5,900 hours. Wireless remote Control, tandem axle, air brakes. Auto-feed reverse, hydraulic flow regulator, in-feed chain and knives are all in good working order, over the top discharge, pro Heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bandit Model 2590 2013
$115,000
Vermeer BC1400 Chipper

Vermeer BC1400 Chipper

2006 Vermeer BC1400 Chipper. This equipment has a 14” capacity. This self-feeding drum style chipper is Powered by a Caterpillar turbo diesel engine, runs and starts good, 1,347 hours, been cleaned, serviced, fully tested, knives in good order with extras. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Vermeer BC1400 2006
$16,500
2012 Bandit 3090 Chipper

2012 Bandit 3090 Chipper

Excellent working one owner machine. 780 HP Cat C18 Pre Emission engine. Just over 3,000 hours. Serial number is 4FMUS3527AR001027. Proheater. Built in Air Compressor with Honda Generator. Tires are like new. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Please feel free to call us. Thanks for looking!

Bandit 3090 2012
$169,500
2014 MORBARK 50/48B DRUM CHIPPER

2014 MORBARK 50/48B DRUM CHIPPER

2014 MORBARK 50/48B DRUM CHIPPER CAT V-12 1050HP PUT IN SERVICE APRIL 2015 ONE OWNER ONE OPERATER CAB WITH LOADER HEAT AND AIR NEW CLAMPS HOLDERS AND ALL NEW HARDWARE ADVANTAGE 3 DRUM

Morbark 50/48B 2014
$399,000
Morbark 2455 Flail Chip Harvester

Morbark 2455 Flail Chip Harvester

1993 Morbark 2455 Portable Tri Axle Flail Chip Harvester. This equipment has a Caterpillar 3412 V12 diesel 800 HP engine, 60"x27' side disc folding conveyor, Morlift 500, Caterpillar 6 cyl. Champion air compressor, remote control. Loader cab, no grapple. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Morbark 2455 1993
$Call for Price
Precision Husky Model 2466 Track Chipper

Precision Husky Model 2466 Track Chipper

1997 Precision Husky Model 2466 Track Chipper Machine with a XL-175 Loader. This equipment has an 84” Disk Chipper, 4 Knife – Long Knives, 34” max log intake, 750 HP K-19 Cummins Engine, 330 CAT Trac Chassis, 30" tracks, double joy sticks, independent hydraulic system for tracks and loader, engine hours: 02231.9 Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Precision Husky 2466 1997
$70,000
Trelan 23 Whole Tree Chipper

Trelan 23 Whole Tree Chipper

1986 Trelan 23 Whole Tree Chipper. This equipment has a rebuilt 3412 CAT engine, 650 HP, runs and starts good 200 hours on rebuild, Pro heat system, Hour meter reads 4,758 hours, knives and in-feed are all in good working order, strong hydraulics, few hose leaks, pintel hitch, decent brakes and tires, bud wheels, front stabilizer. This machine was used as a back up. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Trelan 23 1986
$59,500
Morbark Beever M20R Whole Tree Chipper

Morbark Beever M20R Whole Tree Chipper

2008 Morbark Beever M20R Whole Tree Chipper. This equipment runs and starts good, 4,302 hours, strong hydraulics, hydraulic swivel discharge chute with chip deflectors, infeed rollers and chains are in good condition, feed wheel and knifes are in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark Beever M20R 2008
$54,900
Morbark 40/36 Drum Chipper

Morbark 40/36 Drum Chipper

2016 Morbark 40/36 Advantage 3 Drum Chipper. This chipper has a CAT C18 765 HP tier 2 engine, runs and starts good, hour meter reads 2,230 hours, newer turbo, PT Tech clutch, strong hydraulics and pumps. Advantage 3 Drum in good working order, feed rollers and chains are in good condition, folding cab, tight boom and 360 grapple. Automatic reversing fan system. Rear hydraulic stabilizers. Knives and counter knives are babbitt-style. ESPAR heating system for cold-weather start. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Morbark 40/36 2016
$320,000
Vermeer WC2300 Chipper ***SOLD***

Vermeer WC2300 Chipper ***SOLD***

2011 Vermeer WC2300 Chipper. This chipper has a CAT 440 HP with 4,000 hours, runs and starts good, new oil cooler, new clutch and drum @ 3,00 hours, strong hydraulics, feed chain is in good working order, GVW 32,000 LBS. Good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Vermeer WC2300 2011
$95,000
Dynamic Cone-Head 570 Chipper

Dynamic Cone-Head 570 Chipper

2011 Dynamic Cone-Head 570 Chipper. Hour meter reads 596 hours, Cummins engine, runs and starts good, strong hydraulics and pump, pull hitch was extended so it could be pulled with a roll off truck but can be shortened. Remote control to go with so you can run from the loading equipment, 34" In-Feed, 4-7" Blades, electric brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Dynamic 570 2011
$46,500