Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 646 Forwarder

Valmet 646 Forwarder

1998 Valmet 646 forwarder. Cummins 3.9 engine. Powershift transmission. Joystick controls. Cranab 650 XL loader w/SuperGrip 260 bucket. Tires are 23.1X26 on front & 600mm on rear.

Valmet 646 1998
$50,000
Valmet 644 Forwarder ***SOLD***

Valmet 644 Forwarder ***SOLD***

1998 Valmet 644 Forwarder. This machine has a Cummins 4BT engine, runs and starts good, Power Shift transmission, strong hydraulics and cylinders, new starter, resealed valve bank, rebuilt stick and main cylinders, set of chains for front. 2 spare 23.1 x 26 tires and one extra 44. Newer charge pump, newer boom, tight pins and bushings, SureGrip grapple bypass, tight center section, joystick controls. Stacking blade. Heat, A/c, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Valmet 644 1998
$Call for Price
Valmet 840 6 Wheeled Forwarder

Valmet 840 6 Wheeled Forwarder

1999 Valmet 840 6 Wheeled Forwarder. This machine has a Sisu engine, extenda-boom, tracks and chains, good reliable forwarder, working daily. Major work done includes, valve bank re-seal, rear differential re-seal and brakes, new center oscillation bearings, main boom line bored, new pins and bushings, extenda-boom wear pads, radiator removed and chemical washed, starter and alternator, new A/C pump and expansion valve, new front tire, the rest are 60% or so, new water pump, grapple pins and bushings, new tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 840 1999
$Call for Price
Rottne SMV 8 Wheel Drive Log Forwarder ***SOLD***

Rottne SMV 8 Wheel Drive Log Forwarder ***SOLD***

1999 Rottne SMV 8 Wheel Drive Log Forwarder. This machine has a Ford 6 cyl engine, hydrostatic drive, 4 bunks that have been widened by 6" on each side and stakes made to swivel, RK90 loader with Super Grip 360 grapple, all cylinders have been rebuilt, hydraulic pump rebuilt 1,500 hours ago, 2 sets of snow-rock tracks, spare tire, parts, and service manuals. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Rottne SMV 1999
$90,000
1999 Fabtek 546C Forwarder

1999 Fabtek 546C Forwarder

1999 Fabtek 546C with 19,197 hours at time of listing. Great running machine. Rear tires are near new. Comes with a set of front chains. Has a Supergrip bucket. Many hoses have been recently replaced. Oil changes have been done on a routine basis. Has newer LED lights all around the cab.

Fabtek 546C 1999
$94,900
Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

1999 Rottne Rapid SMV 12 Ton 6 Wheel Forwarder. This machine has a good running Iveco engine, newer injectors, water pump, and rebuilt injection pump within last 800 hours, 70% ice chains on the front, tracks on the rear that had new grousers welded on last winter. 3 of the 4 bogie tires are like new. RG83 boom that is tight with extended boom. 18,000 hours. Steering pins have some play, has a couple leaks but is overall a pretty dry machine for its age. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rottne Rapid SMV 1999
$57,500
Valmet 644 Forwarder ***SOLD***

Valmet 644 Forwarder ***SOLD***

1999 Valmet 644 Single Bunk 8 Ton Forwarder. This forwarder has Cummins engine, runs and starts good, strong hydraulics and cylinders. Joysticks controls, tight boom and grapple, does not have squirt boom. Powershift transmission completely gone through a year ago, Espar preheat. A/C, heat, and lights. 23.1 x 26 tires @ 75% with or without chains. Extra parts: hoses, seal kits, manuals, & transmission pump. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Valmet 644 1999
$56,000
Valmet 646 Forwarder

Valmet 646 Forwarder

1999 Valmet 646 12 Ton 6 Wheel Double Bunk Forwarder. This machine has a newer Cummings 4BT engine, runs & starts good. Joystick control, heat, A/C , and lights. SuperGrip grapple, Extenda boom (squirt), recently replaced hydraulics, cylinders, and pump. Clark Powershift 3 speed transmission in good working order, bogies and differential lock are in good working condition. Front tires are 23’s @ 75%, back tires are 600’s @ 75%, 3 sets of chains included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 646 1999
$39,900
Fabtek 546C Forwarder

Fabtek 546C Forwarder

2000 Fabtek 546C 6 Wheel Double Bunk Forwarder. This machine has a 6.8 PowerTec engine, runs and starts good, rebuilt transmission and converter, Preheater. Strong hydraulics and cylinders, front tires are 30.5x32, tracks and chains, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek 546C 2000
$69,500
Ponsse Buffalo S16 Forwarder

Ponsse Buffalo S16 Forwarder

2000 Ponsse Buffalo S16 Forwarder. This machine runs and starts good, has ~14,000 hours, has been recently serviced, new controls, joystick boxes have been updated, rebuilt hydraulic cylinders on boom, new grapple, new chains on front. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Buffalo S16 2000
$82,500
John Deere 1010B 6 Wheel Forwarder

John Deere 1010B 6 Wheel Forwarder

2000-01 John Deere 1010B 6 Wheel Forwarder. This machine has newer Cummins 4BT engine less then 1,500 hours, runs and starts good, newer pump, transmission was gone through when pump was done, tight center section, bearing and bushings were done on boom, 23.1x 26 front, 610 rear tires with chains. Heat, A.C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1010B 2000
$54,900
Rottne SMV Forwarder ***SOLD***

Rottne SMV Forwarder ***SOLD***

2000 Rottne SMV Forwarder. This machine has a newer John Deere engine with 2,000 hours, runs and starts good, strong hydraulics, newer drive pump, tight center section, boom is solid, one bogie has been replaced, tires & tracks are @ 50%, one set of tracks & spare tire included, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rottne SMV 2000
$64,900