Sort By:   GridGallery
Photo Title
Make Model Year Price
2004 Ponsse Gazelle 8wd Forwarder

2004 Ponsse Gazelle 8wd Forwarder

2004 Ponsse Gazelle 8wd forwarder...Mercedes 4 cylinder turbo engine...K70+M loader with squirt boom...360 SuperGrip grapple...Good 710/40-22.5 tires...New turbo...All serviced and ready to go!

Ponsse Gazelle 2004
$85,000
Valmet 860 Double Bunk 6 Wheel Forwarder

Valmet 860 Double Bunk 6 Wheel Forwarder

2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well. Front tires are @ 75%, rear tires are @ 50%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 860 2001
$57,000
John Deere 1210E Forwarder

John Deere 1210E Forwarder

2012 John Deere 1210E Double Bunk 8 Wheel Forwarder. This equipment has a rotating cab and squirt boom. Hour meter reads 11,300 hours, John Deere 6 cyl. engine, pre heat system, block heater, bogies are all in good order, tight controls, tight center section, lower end was just redone, all cylinders are dry and in good working order, blade, new cutting edge. Heat, A/C, lights, and radio. Machine has been well maintained. 700 tires, newer Clark tracks and chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1210E 2012
$Call for Price
Iron Mule 4500 Forwarder

Iron Mule 4500 Forwarder

1980 Iron Mule 4500 Single Bunk Forwarder. This equipment has a 3 cylinder Perkins engine rebuilt 200 hours ago, new clutch, decent center section. Gafner Loader, strong hydraulics, few minor leaks, 23.1 tires with Bear Claw chains and a spare tire. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Iron Mule 4500 1980
$15,500
Valmet 840.4 Forwarder

Valmet 840.4 Forwarder

2011 Valmet 840.4 8 Wheel Double Bunk Forwarder. This equipment has a Sisu engine, runs and starts good, hour meter reads 13,500 hours, Espar pre heat system. Strong hydraulics and cylinder, tight boom, newer Cranab 360 grapple, tight center section, bogies and axles are in good working order, controls were just adjusted, computer has been updated. Good glass, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 840.4 2011
$165,000
Timberjack 610 Forwarder

Timberjack 610 Forwarder

1997 Timberjack 610 Single Bunk Forwarder. This equipment has a Cummins 4bt engine, runs and starts good, Power shift transmission, newer pump, new clutch, mechanical Joystick controls. Tight boom and Ponsse grapple. 23.1 x 26 tires. Machine comes with extra front and rear axles with planetaries, spare valve bank and some other spare parts. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 610 1997
$38,500
John Deere 1110D Forwarder

John Deere 1110D Forwarder

2009 John Deere 1110D 8 Wheel Double Bunk Forwarder. Hour meter reads 10,600 hours, John Deere 6 cylinder engine, newer EGR cooler, Espar preheat system, center section was just tightened this summer, strong hydraulics and pumps, all cylinders in good working order. CF500 crane, tight pins and bushings, double extension on boom working as it should, super dry machine, well maintained. 710/45-26.5 tires, track on the rear. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1110D 2009
$150,000
Valmet 860.1 6 Wheel Forwarder

Valmet 860.1 6 Wheel Forwarder

2006 Valmet 860.1 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, 12,500 hours, strong hydraulics, new hydraulic pump, tight center section, axles and bogies are all in good working order, new bogie bearings and seals, tight boom and grapple. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 860.1 2006
$92,500
2019 Komatsu 855.1 demonstration machine,less than 500 hours

2019 Komatsu 855.1 demonstration machine,less than 500 hours

2019 Komatsu 855.1 forwarder, 8 wheeler. This machine is a demonstration piece (as new) with less than 500 hours. Boom is 10 meter, double bunk is manually extendable. 710 tires. Every option! Call Tom for Information. Equipment is located in Germany, price includes shipping to US port or Halifax, Canada. We have many more harvesters/forwarders from different brands and years.

Komatsu 855.1 2019
$320,000
Timberjack 1210 Forwarder

Timberjack 1210 Forwarder

1995-1996 Timberjack 1210 8 Wheel Double Bunk Forwarder. This equipment has a Perkins engine, runs and starts good, strong hydraulics and cylinders few minor leaks, decent center section has a little play, bogies are in good working order. Comes with one set of tracks and spare tire, new Lexon glass. Shift button on control will need some attention but works. Heat, A/C need charging, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1210 1996
$38,900
Ponsse Bison Forwarder

Ponsse Bison Forwarder

2001 Ponsse Bison 6 Wheel Double Bunk Forwarder. This equipment has a newer Mercedes Benz 4 cylinder engine with approximately 6,000-7,000 hours, runs and starts good. 13,000 total machine hours. New center pins and big bearing. New rear brake, new controller, strong hydraulics and cylinders. Tight boom and grapple. Heat, A/C, and lights. Tires are in good working order with a set of tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Bison 2001
$87,500
Ponsse Buffalo King Double Bunk Forwarder

Ponsse Buffalo King Double Bunk Forwarder

2013 Ponsse Buffalo King Double Bunk Forwarder. This machine was just gone through by Ponsse. Has a Mercedes 6 cyl. engine, runs and starts good, bunk extenders. New Wabasto engine pre-heater, fire suppression package, strong hydraulics, cylinder, pins and bushings were gone though. Tight Center bearing. Tight K100 crane and newer over-sized grapple. Bogies were gone through. Light package, premium seat with heat and A/C. Tires are in good working order. New Wiring harness. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Buffalo King 2013
$185,900