Feller Bunchers For Sale
Photo |
Title
|
Make | Model | Year | Price |
Bobcat 1080C Feller Buncher with a 16" Bar Saw1989 Bobcat 1080C Feller Buncher with a 16" Bar Saw. Hour meter reads 8,840 hours, 4BT Cummings, new auxiliary pump, new heater, extra bars and chains, new bearings and shaft that run the chain, new hydraulic fluid and filters, good tires and tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bobcat | 1080C | 1989 |
$19,500
|
|
Hydro Ax 511B Feller Buncher1989 Hydro Ax 511B Wheeled Feller Buncher. Hour meter reads 7,450 hours. 5.9 Cummins engine, 2 speed hydrostatic transmission. 28Lx26 Firestone Forestry Specials are estimated at 65%. Straight sheet metal, pins and bushings are good. Timbco 28" bar saw felling head. Risley intermittent head can go with but it has a bad pump. Also includes another bar and 3 new chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Hydro-Ax | 511B | 1989 |
$35,000
|
|
Timberjack 608 Feller Buncher ***SOLD***1991 Timberjack 608 Feller Buncher, This machine has 5.9 Cummins engine, new injector pump and injectors last year, strong hydraulics, tight swing bearing, undercarriage is in good shape at approx. 70%, 24" double grouser pads, FS 18 head with 40 degree tilt in good working condition (new tilt bearing on the head recently.) Main boom and stick boom just repacked. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Timberjack | 608 | 1991 |
$Call for Price
|
|
Valmet 503B WoodStar Series Feller Buncher1991 Valmet 503B WoodStar Series Feller Buncher. Hour meter reads 4,718 hours. Deutz 394 turbo diesel engine. 23.1x26 tires are estimated at 50%. 18" shear head, all cylinders have been repacked recently. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 503B WoodStar | 1991 |
$25,000
|
|
Timberjack 2518 Feller Buncher1992 Timberjack 2518 Feller Buncher. Hour meter reads 8,500 hours. John Deere 4066 engine. Undercarriage is estimated at 75%. Timbco 28" bar saw head. New Lexan glass, extra final drive goes with for parts. Heat, A/C (needs work), lights, & bluetooth radio. Tilt is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 2518 | 1992 |
$21,500
|
|
Hydro-Ax 311B with Shear Head1992 Hydro-Ax 311B with Shear Head. Hour meter reads 14,600 hours. Newer engine has 3,500 hours. 28Lx26 tires are estimated at %. Both sets of chains included. Unit has Hydro-Ax 411 planetaries. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hydro-Ax | 311B | 1992 |
$16,000
|
|
Hydro-Ax 311 Feller Buncher with Shear Head1992 Hydro-Ax 311 with Shear Head. Cummins 4BT engine starts and runs good. 28Lx26 tires are estimated at 20%. Shear head is in good condition, knives are good. Could use a new seat. Heated cab. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hydro-Ax | 311 | 1992 |
$13,000
|
|
Morbark Wolverine 3 Wheel Feller Buncher1992 Morbark Wolverine 3 Wheel Feller Buncher. This equipment has a Cummins 4BT engine, runs and starts good. Strong hydraulics and cylinders, hydrostatic drive, 20" shear head. 28Lx26 tires estimated at 15% but includes two new tires & tubes. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | Wolverine | 1992 |
$29,900
|
|
John Deere 643D Feller Buncher1992 John Deere 643D Wheeled Feller Buncher. Hour meter 19,692 hours. John Deere 6068T engine starts and runs good, new pistons, sleeves, rings, bearings, & injectors. 28Lx26 tires estimated at 25%, duals on the rear. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 643D | 1992 |
$28,500
|
|
Timbco 425 Feller Buncher with Quadco 20B ***PENDING***1993 Timbco 425 Feller Buncher with Quadco 20B Head. Hour meter reads 6,304 hours, frame hours are unknown. Cummins 8.3 engine starts and runs good. 24" single grouser pads, undercarriage is estimated at 90%. All pins and bushings are tight. Leveling system is in working order. Final drives have been gone through and greased. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***PENDING*** |
Timbco | 425 | 1993 |
$37,500
|
|
Timbco 425 Feller Buncher with a 33" Bar Saw Head1993 Timbco 425 Feller Buncher with a 33" Bar Saw Head. This equipment has a Cummins engine, runs and starts good, strong hydraulics and cylinders, many new hoses, drive motors are in good working order, tight boom and base, newer saw motor. Undercarriage is good. Sprockets, rails, and tracks are in good working order. Leveling cab, heat, and lights. A/C may need charge. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Timbco | T-425 | 1993 |
$57,500
|
|
Barko 775B Feller Buncher1994 Barko 775B Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, under 9,000 hours, strong hydraulics, charge pump and hydrostatics have been gone through, few leaks, decent center section, grab arms and accumulator arms have been re pinned and bushed recently. 22" head, straight disc good teeth. 28L x 26 tires @ 25%. Mono tracks and chains available. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 775B | 1994 |
$27,500
|